Home > Shop Brands > Honeywell Power Products > Fire Alarm Power Supplies >

  Honeywell HPFF12E NAC Expander / Power Supply - 0H-HPFF12E - 240VAC/50Hz

Honeywell HPFF12 NAC Expander / Power Supply - 0H-HPFF12 - 240VAC/50Hz


 

Our Price : $569.94


Product Code: 0H-HPFF12E

Qty:

Description Specifications
 
The Honeywell HPFF12(E) and HPFF12CM(E) are Notification Appliance Circuit (NAC) Expander Power Supplies
designed to extend the power capabilities of existing NACs and provide power for auxiliary devices. The HPFF12 and
HPFF12CM connects to any 12 or 24V Fire Alarm Control Panel (FACP) or operates stand-alone.

They provide regulated and filtered 24VDC power to four NAC's and an auxiliary output. The NAC outputs are rated at 3.0 amps each and the auxiliary output is rated at 2.0 amps (this output is continuously supplied, even in alarm, and therefore must be taken into account for power supply loading and battery size calculations). The combined output cannot exceed12.0 amps.

The HPFF12 and HPFF12CM provide independent output circuit supervision so in the event of a NAC fault they can notify the attached FACP. In addition they have a trouble memory feature that displays past troubles (by NAC) for rapid diagnostics. Synchronization is built in for five appliance brands.

The HPFF12 and HPFF12CM have two fully independent supervised initiating circuits that can be used for synchronized
strobes and coded horns. Their NAC outputs may be configured as any of the following:
• four Class B (Style Y)
• two Class A (Style Z)
• two Class B and one Class A
• four Class A with the optional HPP31076 Class A adapter

These power supplies contain an internal Battery charger capable of charging up to 26.0 amp-hour (AH) batteries.

The HPFF12 is mounted in a lockable wall cabinet that can accommodate up to two 18AH batteries. The HPFF12CM is
designed to mount in Honeywell’s large equipment enclosure (EQBB-D4; order separately). Up to three HPFF12CM supplies can be mounted in a D-sized EQ cabinet in positions 2, 3, and 4. Each HPFF12CM can accommodate two 12AH batteries.

One of the most challenging aspects of a retrofit application is locating the existing End-of-Line (EOL) resistor. In these applications that have EOL values other than the 3.9k normally used with the HPFF12, a single resistor matching the existing EOL can be used as a reference for all the outputs. This feature speeds installation and system checkout because the actual EOL does not need to be located and changed in the circuit. The reference resistor must be within the range of 1.9k to 25k.

NOTE: 4 separate programming resistors for the HPFF12 are provided in the hardware kit shipped with each HPFF12(E) and HPFF12CM(E). They are 3.9K (5 of these are provided, need only 1 for programming), 2.2K (1 each), 4.7K (1 each) and 10K (1 each)
Features
  • Listed to UL Standard 864, 9th edition.
  • Four (4) power limited supervised notification application
  • circuits (NAC's) capable of supplying +24VDC at 3.0 amp
  • maximum each.
  • NAC output circuits may be configured as any of the following:
  • – Four Class B (Style Y).
  • – Two Class B & one Class A.
  • – Two Class A (Style Z).
  • – Four Class A (requires the HPP31076 Class A adapter).
  • Four field-programmable operational modes:
  • – Pass-through.
  • – Temporal generator.
  • – Sync generator.
  • – Pass-through Filtered.
  • Temporal coding and sync protocols compatible with the following
  • notification appliance brands:
  • – System Sensor.
  • – Faraday.
  • – Amseco.
  • – Cooper-Wheelock.
  • – Gentex.
  • Protocol pass-through for synchronizing large systems.
  • Two fully independent supervised input/output control circuits.
  • Redundant activation operation for survivability.
  • Supports FACP’s Selectable Silence ability.
  • 2.0 amp auxiliary continuously supplied output.
  • Eight status LEDs.
  • Supervised AC input, battery voltage, auxiliary output, charger, and earth ground faults.
  • Trouble indication for supervision of the following:
  • – NAC circuits.
  • – Auxiliary output.
  • – AC input.
  • – Battery charger voltage.
  • – Earth ground faults.
  • Optional two-hour delay for AC loss.
  • Separate Trouble and AC Fail Form-C relay contacts.
  • The Trouble Form-C relay contacts selectable for immediate or a 2 hour delay with AC failure.
  • 26 AH battery charger capability:
  • – HPFF12(E) supports two 12V 18AH batteries
  • – HPFF12CM(E) supports two 12V 12AH batteries per unit.
  • NAC Overload protection and indication.
  • Provision for mounting single or 6 circuit addressable control or relay modules inside the enclosure. (Use mounting kit PN 90475.)

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Honeywell Power Products > Fire Alarm Power Supplies
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please