Home > Shop Brands > Honeywell Power Products > Access Control Power Supplies >

 

Honeywell HPS125 Switching power supply/charger kit



Honeywell HPS125 Switching power supply/charger kit


 

Our Price : $228.08

UPC Code: 783008106348

Product Code: 485736

Qty:

Description
 
HPS125 Switching power supply/charger kit converts low voltage AC input into 6 VDC or 12 VDC @ 4.0 A of continuous supply current or 24 VDC @ 2.5 A of supply current.

Description

The HPS125 switching power supply/charger kit converts low voltage AC input into 6 VDC or 12 VDC @ 4.0 A of continuous supply current or 24 VDC @ 2.5 A of supply current. This general-purpose power supply has a wide range of applications for access control, security and CCTV systems that require additional power. For convenient operation, this
power supply unit includes the power supply board (p/n HPS5), transformer, steel enclosure (p/n HPB407), 5 Ah 12 V battery, battery leads, and connecting hardware.


Specifications
  • Switch selectable 6 VDC/12 VDC/24 VDC.
    • At 6 VDC or 12 VDC, the output is 4 A total; at 24VDC, the output is 2.5 A total.
      If a battery charger is used, subtract max charge current of 400 mA from total to determine allowable load.
    • Input: 1.0 A max at 120 VAC, 60 Hz.
  • HPS125 includes the power supply (HPS5) and a 28 VAC thermally limited 100 VA transformer.
    • Do not use enclosed battery for 6 VDC output; use a 6 VDC, 5 Ah battery (suggested: Powersonic PS-650L).
    • For 24 V operation, use two 12 V batteries.
  • UL-listed to UL294 Access Control Systems and UL2044 CCTV Equipment.
  • Filtered and electronically regulated output.
  • Built-in charger for sealed lead acid or gel type batteries.
  • Stand-by specification:
    • At 6 VDC, unit provides 0.5 hours of stand-by at 2.65 A with a 6 V, 5 Ah battery.
    • At 12 VDC, unit provides 0.5 hours of stand-by at 3.2 A with a 12 V, 5 Ah battery.
    • At 24 VDC, unit provides 0.5 hours of stand-by at 2.1 A with two 12 V, 5 Ah batteries.
  • Automatic switchover to stand-by battery when AC fails.
  • Thermally limited design.
  • Replace terminal block fuse with 2 A, 250 V fast-blow fuse, size 5 mm x 20 mm. (HPP p/n 12091).
  • Circuit breaker battery protection.
  • AC input (green) and DC output (red) LED diagnostic indicators.
  • Compact design.
  • Hinged cover and vented enclosure with five convenient knockouts.
  • Temperature range: 32F to 120F (0C to 49C); indoor use only.
  • Enclosure dimensions: 10" H x 11.5" W x 4.875" D (25.4 cm H x 29.21 cm W x 12.38 cm D).

  • Share your knowledge of this product with other customers... Be the first to write a review

    Browse for more products in the same category as this item:

    Shop Brands > Honeywell Power Products > Access Control Power Supplies
    Shop Brands > Honeywell Power Products
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please