|
|
|
|
|
|
|
|
|
Features: - No chance of accidental tripping
- Smooth operation without danger of being detected
- Supplied with SPDT contacts for open or closed circuit systems
|
ADEMCO’s series of hold-up devices have been designed for silent operation. Available in a stainless steel cover or hardwired, V-Plex and wireless versions, they mount quickly and easily in discreet locations. They are ideally suited for use in locations such as banks, jewelry stores, retail establishments or any situation that requires hold-up notification. Features: Double-pole double-throw contacts for multi-notifications Switch design provides totally silent operation Twin 45° screw terminals with EOL resistor splicing terminal Adhesive pads for temporary positioning prior to screw mounting Operating temp: 14˚ F to 140˚ F Listed for UL636 Hold-Up alarm units and systems Dimensions: 3-1/2" L x 2" W x 1-1/4" D
|
|
|
|
|
|
|
|
|
|
|
|
|
ADEMCO’s series of hold-up devices have been designed for silent operation. Available in a stainless steel cover or hardwired, V-Plex and wireless versions, they mount quickly and easily in discreet locations. They are ideally suited for use in locations such as banks, jewelry stores, retail establishments or any situation that requires hold-up notification. Features: Silent operation Double-pole double-throw contacts for multi-notifications Twin 45° screw terminals with EOL resistor splicing terminal Adhesive pads for temporary positioning while installing Stainless steel cover Fully supervised Convenient reset key for testing and/or reset of alarm
|
ADEMCO’s series of hold-up devices have been designed for silent operation. Available in a stainless steel cover or hardwired, V-Plex and wireless versions, they mount quickly and easily in discreet locations. They are ideally suited for use in locations such as banks, jewelry stores, retail establishments or any situation that requires hold-up notification. Features: - Silent operation
- Double-pole double-throw contacts for multi-notifications
- Twin 45° screw terminals with EOL resistor splicing terminal
- Adhesive pads for temporary positioning while installing
- Stainless steel cover
- Fully supervised
- Convenient reset key for testing and/or reset of alarm
|
|
|
|
|
|
|
|
|
|
|
|
|
Ademco 273 Indicating Push Switch
|
Features: Protects ceilings, walls, safes and glass Adjustable sensitivity Small and inconspicuous Brown
|
|
|
|
|
|
|
|
|
|
|
|
Features: - Designed for installation in cash registers, cash boxes and at tellers' windows.
- When activated, sends an immediate signal to either the police or central office.
- Single-pole double-throw contacts
- Recessed screws provided for easy mounting
|
Combination foil take-off and contact switch in one unit (BR)
|
|
|
|
|
|
|
|
|
|
|
|
|
Combination foil take-off and contact switch in one unit.
|
Honeywell’s 470-12 is designed to allow water or any conductive non-flammable liquid to be detected with low voltage and low current. It can monitor up to two sensor probes simultaneously. Ideal for basements, laundry rooms and kitchen or anywhere flooding is a possibility and early warning is desirable to prevent damage. Features: Will detect water or any conductive nonflammable liquid Ideal for placement by sump pumps, washing machines, kitchens, etc., where flooding is a possibility 12 volts DC, low current drain Form C (SPDT) output Provided with two sensitivity settings for greater flexibility Can monitor up to 2 sensing probes (470PB) simultaneously Includes One 470PB external water probe
Specifications: Power: 12 Volts DC Probe Current on Activation: 1.0 milliamps Total Current Draw on Activation: 40 milliamps Alarm Output: SPDT Form C Relay Contact Relay Rating: 5 amps Sensitivity: The 470-12 is provided with two sensitivity setting for greater flexibility. Dimensions:
- Module size: 4”W x 2 1/4“H x 2 3/4“ (101mm x 57mm x 70mm)
- Probe size: 2”W x 1”H x 1/2”D (51mm x 25mm x 13mm)
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Water Probe for the 470-12 Water Detector.
|
Features: Programmable Surface Mount Contact Compatible with control panels with serial number device capabilities for multiplex polling loop Traditional "39" style with snap on cover to conceal mounting screws Standard gap: 1.25" (32mm) 5' CLII jacketed cable Epoxy sealed for protection from moisture and impact Programmed from VISTA keypad or learn mode
Specifications: Switch Type: Form A (SPST) Reed Contact Rating: 100ma @ 28VDC Color: Brown
|
|
|
