You are here: Home > Shop Brands > Honeywell Security & Communications > Honeywell Smoke Detectors
We found 6 results matching your criteria.

McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams

Honeywell Smoke Detectors

  V-Plex
  Wireless
Honeywell's smoke and heat detectors install quickly and easily. Point identification and maintenance alert capabilities make it easy to identify the detector in alarm and simplify service and maintenance.
V-Plex
Honeywells V-Plex addressable technology offers many new innovations while fully supporting our previous generation of addressable loop products.
Honeywell's smoke and heat detectors install quickly and easily. Point identification and maintenance alert capabilities make it easy to identify the detector in alarm and simplify service and maintenance.
Wireless
Honeywells field-proven wireless technology is an exciting new advance in security that provides the most reliable, convenient and cost effective solutions for security protection.
Sort By:
Page of 1
Ademco / Honeywell Wireless Life Safety Combo - 5806W3 and 5800CO Ademco 502 135&degF Fixed Temperature Heat Detector (OC)

Honeywell’s 5806W3 is a 3V battery operated, photoelectronic smoke detector with a built-in wireless transmitter. It facilitates fire verification for false alarm reduction requirements by ANSI/SIA CP-01standards and is intended for use with any of Honeywell’s 5800 Series wireless receiver/transceivers for residential installations. The 5881ENHC or 5883H receivers are required for commercial installations.

The transmitter can send alarm, tamper, maintenance (when control panels are equipped to process maintenance signals) and battery condition messages to the system’s receiver. The maintenance signal fully complies with the sensitivity test requirement specified in NFPA 72, 7-2.2 and is UL approved.

The 5806W3 incorporates a state-of-the-art optical sensing chamber and advanced microprocessor. It also helps eliminate nuisance alarms and virtually eliminates non-billable service calls and fines resulting from false alarms. The microprocessor allows the detector to automatically maintain proper operation at factory calibrated detection levels, even when sensitivity is altered due to the presence of contaminants settling into the unit’s smoke chamber. A removable detector cover and chamber top allows the technician to quickly and easily clean the detector chamber without disassembling the detector head.

Since there are no holes to drill or wires to run, installers can preserve the beauty of the protected premise while protecting it. The 5806W3 is an ideal smoke detector for difficult to wire locations, applications where room aesthetics are critical or where hazardous materials exist.

Features

  • Smoothing Algorithms
    Mathematical calculations in the detector’s software that minimize nuisance alarms by smoothing out short term spikes from dust and smoke.
  • Smart Check
    A signal is sent to the control panel when the detector requires cleaning. This allows a regular, non-emergency service call to clean the detector before it goes into alarm.
  • Drift Compensation
    Virtually eliminates nuisance alarms from long-term dust build-up by automatically adjusting the detector’s sensitivity.
  • Removable Detector Cover and Chamber Top
    Provides the technician the ability to quickly and easily clean the detector chamber without disassembling the detector head.
  • Approved UL Listings for Residential and Commercial Applications
    Both residential and commercial installation requirements are met.
  • Additional LED Status Indicators
    Identifying between alarm or trouble conditions is easier with green and red LED status indicators. The green LED denotes a normal condition while the red LED indicates an abnormal condition.
  • Easy-to-install Mounting Base
    The sturdy mounting base allows the detector to be more easily installed on uneven surfaces (i.e. stucco). The mounting base has larger mounting ports to accommodate drywall anchors for easy surface mounting.
  • Improved Robust RF Field Strength
    The distance between the detector and receiver has been significantly increased.

Additional Features:

  • Utilizes one long-life 3V lithium battery
  • Microcontroller runs on an 4.0 MHz clock
  • Horn operates at 3.3 KHz with sound pressure level of 85dBA at 10 feet
  • Built-in wireless transmitter, temporal code 3 sounder

Specifications:

  • Dimensions : Diameter: 5.3"*, Height: 2.30"
  • Weight : 8.5 oz. (without batteries)
  • Operating Temperature : 32:100°F (0:37.8°C)
  • Humidity Range : 0% to 95% RH, non-condensing
  • Air Velocity : 1,000 ft./min. max.
  • Operating Voltage : 2.5:3.6VDC
  • Standby Current : 8.5 ?A avg.
  • Alarm Current : 35 mA max.
  • Power Source : One 3V CR123A lithium Battery**
  • Audible Output : 85dB min. @ 10 ft.
  • Agency Listings : UL268 : Commercial and Residential


* With adapter bracket (4.9" without mounting base)
**Replacement batteries include Duracell DL123A, Sanyo CR123A, Panasonic CR123A, or ADEMCO 466

The 5800CO is a 3V battery powered wireless carbon monoxide (CO) detector intended for use with Honeywell alarm systems that support 5800 Series wireless devices. It provides early warning when its electrochemical sensing technology measures carbon monoxide levels in the air.

The 5800CO is specifically designed for system operation and is fully listed to UL 2075 as a system supervised detector.* It contains a piezoelectric horn which generates the ANSI S3.41 temporal 4 pattern in an alarm condition.

The detector consists of an electrochemical carbon monoxide sensor assembly coupled with a wireless transmitter. The transmitter can send alarm, trouble, end-of-life, tamper and low battery condition messages to the alarm panel.

Since there are no holes to drill or wires to run, you can preserve the beauty of the home or building while protecting its occupants from harmful carbon monoxide gas. The 5800CO is an ideal carbon monoxide detector for difficult to wire locations, applications where room aesthetics are critical or where hazardous materials exist.

What is Carbon Monoxide and How Can it Harm Consumers? Carbon monoxide (CO) is an odorless, colorless, tasteless and highly toxic gas that is produced when fuels such as wood, gasoline, charcoal and oil are burned with insufficient air. The majority of residential and commercial fatalities caused from these fuels come from heating systems, engine powered tools and charcoal grills. Carbon monoxide is harmful when inhaled because it displaces oxygen in the blood and deprives the heart, brain and other vital organs of oxygen. Large amounts of CO can overcome a person in minutes without warning—causing them to lose consciousness and suffocate.

The 5800CO is designed to warn the end-user well before the CO reaches a fatal level. The detector’s CO sensitivity is evaluated to UL 2034.

135 ° F Fixed Temperature Heat Detector (OC)

Ademco 503 135&degF Fixed Temperature Heat Detector (CC) Ademco 504 190&degF Fixed Temperature Heat Detector (OC)

135°F Fixed Temperature Heat Detector (CC)

190°F Fixed Temperature Heat Detector (OC)

Ademco 5192SDT Addressable Photoelectric Smoke Detector with Integral Heat Sensor Ademco / Honeywell 5808W3  - Photoelectric Smoke/Heat Detector with Built-in Wireless Transmitter
DISCONTINUED REPLACED BY 5193SDT Addressable Photoelectric Smoke Detector with Integral Heat Sensor

The ADEMCO 5192 Series low profile, addressable V-Plex smoke detectors deliver state-of the-art features and benefits in a cost-effective package. These detectors are designed to provide open area coverage and are compatible with ADEMCO’s VISTA controls supporting V-Plex technology.

An LED on the detector will blink periodically during normal conditions, remain on steady during alarm and cease to pulse if the chamber is out of acceptable sensitivity range.

An extremely powerful feature available within the 5192 Series is the Automatic Maintenance Alert/Reporting capability - a feature normally found in today’s high end analog addressable systems. The detectors continually monitor their own sensitivity levels in addition to the basic normal and alarm conditions.

These HIGH and LOW SENSITIVITY signals are communicated back to the control, via the V-Plex addressable loop, to indicate locally and at the central station that the detector may not be able to detect smoke or may false alarm. This feature works with Vista-32FB, 128FB, 128B and First Alert Professional FA1600C.

More important is the cost saving associated with Automatic Maintenance Reporting. The feature is an approved alternate to NFPA 72 field sensitivity calibration testing that require external test meters. This eliminates the need to schedule inspections to determine detector sensitivity/viability.

Moreover. the smoke detectors are able to operate on existing wiring. There's no need to run special twisted pair, data grade or shielded wires. That adds up to valuable savings in time and materials!

  • Low profile design
  • V-Plex™ addressable loop device
  • Automatic maintenance reporting
  • Available with integral heat sensor
  • Simple 2 wire installation
  • Tamper resistant
  • DIP switch or serial number programmable
  • Lines on existing or conventional wiring
Honeywell’s 5808W3 is a 3V lithium powered, photoelectronic smoke/heat detector with a built-in wireless transmitter. It is intended for use with any 5800 Series Wireless Receiver/Transceiver for residential installations (for commercial installations, the 5881ENHC or the 5883H receiver is required).

The transmitter can send alarm, tamper, maintenance (when control panels are equipped to process maintenance signals), and battery condition messages to the system’s receiver. Smoothing algorithms minimize nuisance alarms by smoothing out short term spikes from dust and smoke – virtually eliminating nuisance alarms.

Since there are no holes to drill or wires to run, you can preserve the beauty of the building while protecting it. The 5808W3 is an ideal smoke detector for those difficult to wire locations, applications where room aesthetics are critical, or where hazardous materials exist.

All models also feature a restorable, built-in, fixed temperature (135°F) thermal detector that is also capable of sensing a pre-freeze condition if the temperature is below 41°F.

Features:

  • Improved Robust RF Field Strength
    The distance between the detector and receiver has been significantly increased without the need for a repeater
  • Smoothing Algorithms
    Mathematical calculations in the detector’s software that minimize nuisance alarms by smoothing out short term spikes from dust and smoke
  • Smart Check
    A signal is sent to the control panel when the detector requires cleaning. This allows a regular, non-emergency service call to clean the detector before it goes into alarm.
  • Drift Compensation
    Virtually eliminates nuisance alarms from long-term dust build-up by automatically adjusting the detector’s sensitivity
  • Removable Detector Cover and Chamber Top
    The technician is able to quickly and easily clean the detector chamber without disassembling the detector head
  • Approved UL Listings for Residential and Commercial Applications
    Both residential and commercial installation requirements are met
  • Additional LED Status Indicators
    Identifying between alarm or trouble conditions is a snap with green and red LED status indicators. A green LED denotes a normal condition while the red LED indicates abnormal conditions.
  • Easy-to-install Mounting Base
    The sturdy mounting base allows the detector to be more easily installed on uneven surfaces (i.e. stucco). The mounting base has larger mounting ports, which accommodate drywall anchors for easy surface mounting.

Additional Features:

  • Utilizes one long-life 3V lithium battery
  • Microcontroller runs on a 4.0 MHz clock
  • Horn operates at 3.3 KHz with sound pressure level of 85 dBA at 10 feet
  • Built-in wireless transmitter, temporal code 3 sounder
  • Maintenance signal fully complies with the sensitivity test requirement specified in NFPA 72, 7-2.2 and is approved by UL

Specifications:

  • Dimensions : Diameter: 5.3" *, Height: 2.30"
  • Weight : 8.5 ounces (without batteries)
  • Operating Temperature : 32:100° F (0:37.8° C)
  • Humidity Range : 0% to 95% RH, non-condensing
  • Air Velocity : 1,000 ft./min. max.
  • Operating Voltage : 2.5:3.6VDC
  • Standby Current : 8.5 mA avg.
  • Alarm Current : 35 mA max.
  • Power Source : One 3V CR123A lithium Battery **
  • Audible Output : 85 dB min. at 10 ft.
  • Fixed Temperature Heat Sensor : 135° F Fixed
  • Agency Listings : UL268 - Commercial and Residential


* With adapter bracket (4.9" without mounting base)
**Replacement batteries include Duracell DL123A, Sanyo CR123A, Panasonic CR123A, or ADEMCO 466
   
 
Honeywell's detectors install quickly and easily. Point identification and maintenance alert capabilities make it easy to identify the detector in alarm and simplify service and maintenance.

 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please