Honeywell’s latest addition to the EQUIP Series of IP-based products, the HD3MDIH is a high definition, True Day/Night indoor fixed mini-dome network camera engineered to provide extremely crisp images at minimal bandwidth. The HD3MDIH provides 720p resolution at full frame rate. Progressive scan technology and 2D edge enhancement provide outstanding clarity and definition. Digital Noise Reduction results in significant storage savings without sacrificing image quality in low light. The 1/4" progressive scan CMOS sensor offers the latest in digital video surveillance technology with accurate color rendition through a wide variety of lighting conditions. The HD3MDIH also supports the PSIA specification for interoperability between network video products.

The compact, one piece design provides fast and easy installation in any application. The camera comes complete with surface and flush mounting options (compatible with a 4S electrical box) and an optional wall/pendant mount kit is available.

In addition to the low light color performance, the camera will automatically switch to black and white. In this mode, lighting can be complemented with infrared for discreet/covert low light surveillance with exceptional monochrome images.

A 3-D axis gimbal capable of 360º of pan, 180º of tilt and 360º of horizontal rotation simplifies mechanical camera adjustment. The Vari-focal Auto Iris lens allows the field of view to be adjusted to suit the scene requirements, and an onboard analog output allows the installer to connect a local test monitor while adjusting the scene.

A powerful and intuitive web client allows fine tuning of the camera and the auto iris levels. This can also be performed from most DVR/NVR setup utilities.

The HD3MDIH supports dual video streams and multiple compression formats with rates up to 30 frames per second (25 fps for PAL systems). The digital compression parameters for the two video streams are independently configurable. A third analog stream can be utilized as backup or for local viewing. It is also valuable when retrofitting onto an existing analog input DVR or encoder (full resolution not available).

With built-in low current Power over Ethernet (IEEE 802.3af), Class 1, power is supplied to the camera using standard network cabling, eliminating the need for a separate power supply and associated wiring. In retrofit situations where PoE switching does not exist, the unit can also be powered directly from 24 VAC.

Market Opportunities
The HD3MDIH is perfect for installations where excellent picture clarity at minimal bandwidth is required. At three times the resolution of standard analog cameras, yet with similar bandwidth requirements, the HD3MDIH can be retrofitted on many existing DVR/NVR installations without requiring additional storage.

• Operational
• Video Standard NTSC, PAL
• Scanning
• System Progressive scan
• Image Sensor 1/4" CMOS
• Number of
• Pixels (H x V) 1280 x 720
• Minimum
• Illumination
• 0.25 lux colour/0.22 lux BW @ 50 IRE, F1.6
• 0.11 lux colour/0.09 lux BW @ 30 IRE, F1.6
• Automatic Lens
• Control DC Iris Level 1-25
• Video Output
• (AUX) 1.0 Vp-p @ 75 Ohms
• S/N Ratio 50 dB or more (AGC off)
• Auto Gain
• Control Off/On, selectable (10-40 dB)
• Automatic
• Electronic
• Shutter
• 1/60-1/24,500 sec (NTSC)
• 1/50-1/24,500 sec (PAL)
• Lens Type True Day/Night (TDN), 3.3-12.0 mm Vari-focal
• Auto Iris, F1.6
• White Balance AWC, AWC Push, Manual
• Audio/Two-Way Line in/out
• Electrical
• Input Voltage 24 VAC, PoE IEEE 802.3af, Class 1
• Input Range 17-28 VAC
• Surge
• Suppression 1.5 kW transient
• Power
• Consumption 3.5 W (max)
• Mechanical
• Dimensions
• (W x H x D) See Diagram
• Weight 0.448 kg camera only
• Construction Housing: Polycarbonate
• Finish: Matt texture, off white
• Connector
• Video Output: 2-pin Molex connector
• Power Input: Removable screw block
• Network: RJ45 connector
• Alarm I/O: Removable screw block
• Audio In: Removable screw block
• Audio Out: Removable screw bloc
• Environmental
• Temperature Operating: -10°C to 50°C
• Storage: -20°C to 60°C
• Relative
• Humidity 0% to 85%, non-condensing
• IP Specifications
• Video
• Compression Dual stream H.264 and MJPEG
• Resolution
• 1280 x 720
• 800 x 450
• 640 x 360
• 320 x 180
• Bitrate H.264
• (Typical)*
• 1.8 Mbps
• 1.2 Mbps
• 0.6 Mbps
• 0.21 Mbps
• Frame Rate
• 30/25
• 30/25
• 30/25
• 30/25
• Storage/Day
• (GB)
• 18.98
• 12.65
• 6.33
• 0.89
• Frame Rate
• NTSC/PAL Up to 30/25 fps video in all resolutions
• Video
• Streaming
• Dual streaming:
• Controllable frame rate and bandwidth
• Constant or variable bit rate
• Security Multiple user access levels with password
• protection
• Users 1 Administrator, 3 Guests
• Video Access
• from Web
• Browser
• Camera live view for 1 client. Full control of all
• camera settings available to administrator
• Minimum
• Web
• Browsing
• Requirements
• Pentium IV CPU 3.0 GHz or equivalent AMD,
• 512 MB RAM, AGP graphics card (32 MB RAM)
• Windows® insert row in table
• XP 2000, Internet Explorer 6.0 or later
• Installation
• and
• Management
• Maintenance
• Honeywell IP Utility software identifies the IP
• address, checks status of device, firmware
• upgrades over HTTP
• Supported
• Protocols
• HTTP, TCP, RTSP, RTP, UDP, ARP, DNS,
• RTCP, FTP, ICMP, DHCP, Bonjour, IGMP, Telnet
• Standards PSIA support
• Regulatory
• Emissions FCC part 15B, CE (EN55022)
• Immunity CE (EN55024)
• Safety EU: 2001/95/EC GPSD, UL 60950-1
• System Integration
• Open IP Integration
• PSIA support and open API for real interoperability between Honeywell and other manufacturers’ IP-enabled security devices. Refer to the Honeywell Open Technology Alliance [ http://www.honeywell.com/security/hota ] to learn more about our open and integrated solutions.
• Accessories Sold Seperately
• Housing and Mounts HD3-MK1 Wall/Pendant Mount Kit, Off White

Like all cameras in the EQUIP IP Series, the HD3MDIH network camera uses Honeywell technology for video motion
detection, tamper detection, remote firmware updating and for secure storage of all camera settings. Video motion
detection recognises object motion within the field of view, then a simple on-screen notification alerts the user. Camera
tamper detection notifies the user when a camera’s field of view is altered, blinded or blurred. This ensures the video’s
integrity and alerts the customer to either a live event or a system problem that is causing disruption to the video stream.
Honeywell’s technology also allows users to remotely upload firmware to the camera. Setup is quick and easy and can
be customised through a web client or from an NVR or DVR. The built-in web server provides password protected
access to the camera’s video and network setup.