Honeywell is focused on providing the best alarm communication
solutions for the security industry. Alternative communication
methods are critical in the marketplace due to VoIP, migration from
POTS and global growth of digital networks.
Honeywell's IntelliPath™ Series communicators provide seamless,
reliable coverage by automatically choosing the best signal in the area
(whether 2G, 3G or 4G) and self-adjusting as necessary.
The following wireless communication protocols are supported:
HSPA+ (4G )
HSPA (HSDPA & HSUPA) (3G)
This groundbreaking communications solution offers full data
reporting and uploading/downloading with most Honeywell control
panels. In addition, with onboard zone inputs and optional dialer
capture capability, we’re compatible with other manufacturers’
security panels as well. Honeywell communication products and
control panels combine to make installations faster and easier.
All signals are delivered to Honeywell’s AlarmNet® Network Control
Center, which routes the information to the appropriate central
station. The state-of-the-art AlarmNet Network Control Center is
fully redundant and monitored 24/7. AlarmNet has the ability to
route messages using AlarmNet-i and 800 PLUS services,
providing true redundancy and multi-path message delivery.Features
- Multi-GSM platform compability
—2G, 3G and 4G
- Automatic selection of the best
available GSM network
- 4G capable using HSPA+ protocol
- Full Contact ID or ADEMCO®
Contact ID reporting using ECP mode
with compatible Honeywell control panels
or combined with optional dialer capture
for non-ECP capable control panels.
- 256-bit AES Encryption
Advanced encryption standard used for
Available with select Honeywell control
panels. Requires Compass version
184.108.40.206a or higher.
Quick and easy installation of GSM
for VISTA® and LYNX controls.
- Dynamic Signaling with Certain
Honeywell Control Panels
Provides management of control panel
dialer and digital cellular communicator.
Programmable priority and delays
determine signal path.
- Diagnostic LEDs
Provide signal strength and
Quality of Service diagnostics via
AlarmNet supply vital information
including when a message was
received, battery voltage, input
voltage, signal strength and
- Web-Based Programming
Allows complete interactive
programming from AlarmNet Direct. https://services.alarmnet.com/AlarmnetDirect
- Intelligent Supervision
Any message generated serves as
a supervision message per optional
24 hour or 30 day intervals. This feature
effectively limits required messages to
- Remote Services Capability*
Optional Honeywell Total ConnectTM
Remote Services value-added
web-based or SMS system control
as well as e-mail notification of
- Two-way Voice Transport
GSM voice channel capable to allow
two-way voice session in conjunction
with an audio verification system.
- Universal Control
Flexible modes of operation allow
ECP alarm reporting by Honeywell
control panels, 4204 relay mode
for Honeywell controls (that do
not support ECP alarm reporting)
and zone triggering for use with
other control panels.
- Dialer Capture Ready
Compatible with Dialer Capture
Intelligence Device DCID (for LYNX)
or DCID-EXT (other control panels).
Captures Contact ID messages from
the panel’s phone line and sends
them to the central station via the
GSM radio (not agency approved).
- Six Input Zones
Digital processing for improved
detection and false alarm protection
- Tamper Protected Enclosure
Built-in tamper sends a report when
a tamper condition is detected and
a restore when cleared.
- Built-in Power Supply
Onboard charging circuit design
accommodates back-up battery.
Includes primary power and
- Back-Up Battery
6V 3.1Ah supplied to deliver up to
24 hours of standby operation.
*Service subscription required.