You are here: Home > Burglar Alarms / Intrusion >

Horns, Strobes, Sirens for Burglar Alarm Systems

>

Horns, Strobes & Sirens Accessories

We found 64 results matching your criteria.
Burglar alarms equipped with alert devices can incorporate various accessories based on application requirements. Security Store USA provides accessories for commercial and home alarm systems that customize and enhance the use of horns, strobes, and sirens. We supply strobe lights and lenses of various colors as well as combination strobe/speaker units with ruggedized construction. Also available are burglar alarm siren driver boards for integration with control panel units.
Sort By:
Page of 6
Ademco 710AM Amber Strobe Light Ademco 710BL Blue Strobe Light
  • High intensity flashes for fast premises identification

  • May be surface mounted or mounted on alarm bell housing

  • 6 to 12 volts DC operation in single unit

  • Excellent visibility . . . widest angle coverage

  • Weather resistant for outdoor use

  • Available in clear, amber, red and blue

  • Low current consumption --350 mA

  • Provision made for Snap-In Tamper Switches - ADEMCO Nos. 112-113

  • High intensity flashes for fast premises identification

  • May be surface mounted or mounted on alarm bell housing

  • 6 to 12 volts DC operation in single unit

  • Excellent visibility . . . widest angle coverage >

  • Weather resistant for outdoor use

  • Available in clear, amber, red and blue

  • Low current consumption --350 mA

  • Provision made for Snap-In Tamper Switches ADEMCO Nos. 112-113

  • Ademco 710CL Clear Strobe Light Ademco 710RD Red Strobe Light
  • High intensity flashes for fast premises identification

  • May be surface mounted or mounted on alarm bell housing

  • 6 to 12 volts DC operation in single unit

  • Excellent visibility . . . widest angle coverage

  • Weather resistant for outdoor use

  • Available in clear, amber, red and blue

  • Low current consumption --350 mA

  • Provision made for Snap-In Tamper Switches ADEMCO Nos. 112-113

  • High intensity flashes for fast premises identification

  • May be surface mounted or mounted on alarm bell housing

  • 6 to 12 volts DC operation in single unit

  • Excellent visibility . . . widest angle coverage

  • Weather resistant for outdoor use

  • Available in clear, amber, red and blue

  • Low current consumption --350 mA

  • Provision made for Snap-In Tamper Switches ADEMCO Nos. 112-113

  • Ademco V250BP-KT3 Vista Kit w/ VISTA-250BP Commercial Burglary/CCTV & Access Control Platform & one 6160 Delux 32-Character Alpha Keypad & 747 Siren Altronix ALSD2 - Siren Driver. 6/12VDC .3A-1.22A
    Includes:
  • VISTA-250BP CONTROL,BURG COMMERCIAL 1
  • 6160 ALPHA ENGLISH KEYPAD 1
  • 747 INDOOR SIREN 2 TONE WALL MOUNT 1 Self-contained Indoor Siren
  • Overview

    Model ALSD2 is a high output very low current draw dual channel siren driver designed to work with alarm panels with limited current capability.

    Features/Specifications


    • 6VDC or 12VDC operation.
    • Parallel or series speaker wiring:
    - 103 db @ 10 ft. @ 6V
    - 8 Ohms
    - 105 db @ 10 ft. @ 6V
    - 4 Ohms
    - 106 db @ 10 ft. @ 12V
    - 8 Ohms
    - 111 db @ 10 ft. @ 12V
    - 4 Ohms
    • Current draw range from .3 amp to 1.22 amp based on speaker resistance and supply voltage.
    • Two (2) channel operation
    - steady or yelp.
    • Very low current draw.
    • Lifetime Warranty.

    Board


    • Dimensions (approximate): 2.75”W x 1.1”L x 1.75”H.
    Altronix AX-ALSD1 Siren Driver ATW STL-1BL 6 - 14 VDC Strobe Light, Blue

    Siren Driver

    The ALSD1 is a high output very low current draw dual channel siren driver designed to work with alarm panels with limited current capability.
    • 6 or 12VDC operation.
      6VDC to 12VDC operation
      Parallel or series speaker wiring
      112 db @ 10’ @ 6V - 8 Ohms
      115 db @ 10’ @ 6V - 4 Ohms
      116 db @ 10’ @ 12V - 8 Ohms
      120 db @ 10’ @ 12V - 4 Ohms
      Current draw range from .5 amp to 1.8 amp based on speaker resistance and supply voltage.
    • Two (2) channel operation - steady or yelp.
    • Very low current draw.
    Benefits & Features
  • Single post threaded mounting screw
  • Designed for use with the ATW DS-301 Set or H-301 Set
  • Compact style and weather-resistant

    Specifications
  • Flash rate: 115 per minute
  • Operating voltage: 6 - 14 VDC
  • Current draw: 150 mA @ 12 VDC
  • Operating life: 200 hours of continuous duty @ 12 VDC
  • Dimensions: 2.8” x 1.5”
  • Colors: Amber, blue, clear, and red
  • Materials: Black ABS plastic base and acrylic lens
  • Wiring: Red-positive, Black-common
  • ATW STL-1CL 6 - 14 VDC Strobe Light, Clear ATW STL-1RD 6 - 14 VDC Strobe Light, Red
    Benefits & Features
  • Single post threaded mounting screw
  • Designed for use with the ATW DS-301 Set or H-301 Set
  • Compact style and weather-resistant

    Specifications
  • Flash rate: 115 per minute
  • Operating voltage: 6 - 14 VDC
  • Current draw: 150 mA @ 12 VDC
  • Operating life: 200 hours of continuous duty @ 12 VDC
  • Dimensions: 2.8” x 1.5”
  • Colors: Amber, blue, clear, and red
  • Materials: Black ABS plastic base and acrylic lens
  • Wiring: Red-positive, Black-common
  • Benefits & Features
  • Single post threaded mounting screw
  • Designed for use with the ATW DS-301 Set or H-301 Set
  • Compact style and weather-resistant

    Specifications
  • Flash rate: 115 per minute
  • Operating voltage: 6 - 14 VDC
  • Current draw: 150 mA @ 12 VDC
  • Operating life: 200 hours of continuous duty @ 12 VDC
  • Dimensions: 2.8” x 1.5”
  • Colors: Amber, blue, clear, and red
  • Materials: Black ABS plastic base and acrylic lens
  • Wiring: Red-positive, Black-common
  • Commercial Products Group IS820-RHKAPR (IS820RHKA) - Remote Alarm, Pilot, Horn, Key-Operated Test/Reset Switch Commercial Products Group 367-0183 - WIRE GUARD FOR HORNS AND HORN STROBES 7 X 7 X 6
    Description
    IS820 Analog Addressable duct smoke detectors provide early detection of smoke and products of combustion present in air moving through an HVAC duct. These devices are designed for prevention of smoke re-circulation in areas by the air handling system (s). Fans, blowers, and complete systems may be shut down directly by the two 10A form “C” alarm relays provided in the duct smoke unit when smoke is detected.
     
    The duct detector requires an external 24VDC supply, so as not to load down the analog addressable loop (SLC). Visual indicators, pilot and alarm, are mounted on the housing front for status indication. A manual test alarm relay switch is also provided on the front of the detector. Remote accessories can be accommodated.
     
    The IS820 utilizes a Harrington Signal, Inc photoelectric (-P) or ionization (-N) analog addressable detector head which is included with the unit.These devices have unique features that benefit the installer and the end user; it’s user friendly addressing, extended data and alarm feature meet the demands of today's high-technology environments, codes and standards, as well as providing additional life safety functionality.
     
    Each Harrington Signal, Inc duct detector is supplied with an X-pert card. In order to set the proper address, consult the addressing guide. Place a screwdriver in the pip's slit and five it a firm twist. Removal of the proper pip(s) completes the addressing procedure. Slide the coded xpert card into the side of the base, making sure it locks in position. Once the detector head is placed into the base, the remaining pips will operate the address buttons on the detector head and the address will be read by the head's electronics.
     
     Factory pre-programmed X-Pert cards which have the appropriate address pips removed, and the address number silk screened on the protruding tab can be purchased if desired.
    Air sampling is accomplished by two tubes which protrude in the duct. An exhaust tube of one standard length (7”) is provided with the detector housing.Intake sampling tubes, which must be ordered sparately, are supplied in three standard lengths.
    Description
    The Harrington CHSG wire guard is specifically designed to mount over audible, visual or combination appliances (ie. Horn/strobe). It assists in protecting the device from accidental blows, and also help to deter vandalism in public areas.
    Constructed of heavy gauge tempered steel rod and designed to minimize interference with the operation of the device. CHSG 7” x 7” x 6” Wire Guard for Horns and Horn/Strobes, Chrome Finish
    Features
  • Durable wire cage design
  • Heavy 7 gauge welded construction
  • High aesthetic nickel (chrome) finish
  • Easy mounting for new installation or retrofit
  • Overall inside dimensions 7” x 7” x 6”
  •    
     
    Horns, Strobes & Sirens Accessories
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please