Horns, Strobes, Sirens for Fire Alarm Systems

You are here: Home > Fire Alarms > Fire Horns, Strobes & Sirens >
Horns, Strobes, Sirens for Fire Alarm Systems

We found 20 results matching your criteria.

You'll satisfy all your fire alarm equipment requirements at Security Store USA. Choose from fire horns, strobes and sirens that provide visual and/or audio fire alarm signals. You'll find powerful fire alarm equipment including horns, indoor and outdoor warning sirens, explosion-proof emergency strobe lights, and more. These fire alarm products can be easily installed and integrated into your organization’s fire system to notify workers and the public that a fire has erupted.

Fire Horns are another fire alarm signaling mechanism that can be easily mounted inside and outside buildings. Security Store USA sells fire horns and sirens that emit loud, vibrating noises for incorporating into your fire system. The fire horns effectively notify building occupants that there's danger and they should evacuate the premises immediately.

Strobe lights are the ideal fire alarm, releasing both visual and audio warnings. Security Store offers a variety of strobes that are particularly useful in hazardous areas, including mines and refineries, where a unique audible signal is required. Security Store USA also offers strobes to provide visual notification to the hearing impaired. These strobes emit a flashing, blinking light as a warning signal that a safety hazard or fire exists. By integrating this type of fire alarm into your business's fire system, you can increase safety and fire protection of all your workers.

Security Store USA carries powerful fire alarm sirens and speakers to warn people that there is a danger. Find fire alarm sirens that can be mounted indoors and outdoors, and that produce electronically generated warning tones or enable full range voice communication. Many of the sirens that are available are intended for installation in hazardous work locations, including mines, chemical plants and refineries. These fire alarms are weatherproof and corrosion-resistant, and connect to supervised fire alarm notification circuits

Sort By:

Page of 2


Ademco 702 - Self-contained Electronic Siren Our Price : $19.99		Ademco 747F - Self-contained Siren, Flush Mount Our Price : $16.00

Features: 6 to 12 volt DC combination speaker and siren driver Dual tone - warble or steady Enclosed wires, easily tampered 30 watt power rating Protective cabinet available Built-in Tamper Plate protects wires from attack Specifications: db Output: 110dB Current Draw: 1500mA Operating Voltage: 6-14VDC Power: 30 watt Indoor/Outdoor: Both Residential/ Commercial: Both Dual Tone: Yes Tamper: No		Features: 2 tones: steady and warble. Driver is built-in Durable ABS plastic 15 watt power rating 105dB output at 12VDC Easy mounting with hardware included High quality mylar cone Heavy duty magnet 747UL (UL Listed) also available Specifications: db Output: 105dB Current Draw: 400mA Operating Voltage: 6-14VDC Power: 15 watt Indoor/Outdoor: Indoor Residential/ Commercial: Residential Dual Tone: Yes Tamper: No


Ademco 748 - Dual Tone Extra Loud Siren Our Price : $48.66		Ademco 748LC - Dual Tone Siren with Low Current Draw Our Price : $42.95

At 119 db, the 748 is the loudest self-contained siren you can buy today. The fully tampered and weather-resistant 748 mounts directly to a 4" electrical box or wall -- eliminating the need for a cabinet. Priced below other sirens, the compact design of the attractive 748 makes installation easier than ever before -- indoors or out. Features: Extremely loud - 119db Smaller - mounts directly to wall or 4 electrical box Dual tone output - steady and warble Ready to mount - no disassembly required Tamper proof and weather resistant Attractive, can be used indoors or outdoors Snap on trim ring conceals screws Specifications: db Output: 119dB Current Draw: 1200mA Operating Voltage: 6-14VDC Power: 25 watt Indoor/Outdoor: Both Residential/ Commercial: Both Dual Tone: Yes Tamper: Yes		The fully tampered and weather-resistant 748LC mounts directly to a 4" electrical box or wall -- eliminating the need for a cabinet. Priced below other sirens, the compact design of the attractive 748LC makes installation easier than ever before -- indoors or out. Features: Very Loud: 112db Low current draw, 550mA @ 12VDC Smaller - mounts directly to wall or 4 electrical box Dual tone output - steady and warble Ready to mount - no disassembly required Tamper proof and weather resistant Attractive, can be used indoors or outdoors Snap on trim ring conceals screws Specifications: db Output: 112dB Current Draw: 550mA Operating Voltage: 6-14VDC Power: 25 watt Indoor/Outdoor: Both Residential/ Commercial: Both Dual Tone: Yes Tamper: Yes


Ademco 749 - Speaker/Horn 8 Ohms/20 Watts Our Price : $36.15		Commercial Products Group IS820RHKA - Remote Alarm, Pilot, Horn, Key-Operated Test/Reset Switch Our Price : $66.00

Features: 8 ohms/20 watts (25 watts peak) Smaller - mounts directly to wall or 4 electrical box Dual tone output - steady and warble Ready to mount - no disassembly required Tamper proof and weather resistant Attractive, can be used indoors or outdoors Snap on trim ring conceals screws Specifications: Power: 20 watt Ohms: 8 ohm Indoor / Outdoor: Both Leads / Terminals: Leads		Description IS820 Analog Addressable duct smoke detectors provide early detection of smoke and products of combustion present in air moving through an HVAC duct. These devices are designed for prevention of smoke re-circulation in areas by the air handling system (s). Fans, blowers, and complete systems may be shut down directly by the two 10A form “C” alarm relays provided in the duct smoke unit when smoke is detected. The duct detector requires an external 24VDC supply, so as not to load down the analog addressable loop (SLC). Visual indicators, pilot and alarm, are mounted on the housing front for status indication. A manual test alarm relay switch is also provided on the front of the detector. Remote accessories can be accommodated. The IS820 utilizes a Harrington Signal, Inc photoelectric (-P) or ionization (-N) analog addressable detector head which is included with the unit.These devices have unique features that benefit the installer and the end user; it’s user friendly addressing, extended data and alarm feature meet the demands of today's high-technology environments, codes and standards, as well as providing additional life safety functionality. Each Harrington Signal, Inc duct detector is supplied with an X-pert card. In order to set the proper address, consult the addressing guide. Place a screwdriver in the pip's slit and five it a firm twist. Removal of the proper pip(s) completes the addressing procedure. Slide the coded xpert card into the side of the base, making sure it locks in position. Once the detector head is placed into the base, the remaining pips will operate the address buttons on the detector head and the address will be read by the head's electronics. Factory pre-programmed X-Pert cards which have the appropriate address pips removed, and the address number silk screened on the protruding tab can be purchased if desired. Air sampling is accomplished by two tubes which protrude in the duct. An exhaust tube of one standard length (7”) is provided with the detector housing.Intake sampling tubes, which must be ordered sparately, are supplied in three standard lengths.


Commercial Products Group ASHH24SMR - Amplified speaker for use in hazardous areas Our Price : $470.00		Commercial Products Group ASHP24SMR - Amplified Speaker, 24VDC or 25/70VRMS, Red Our Price : $333.00

Description CPG Signals Model ASHH PowerTone Amplified Speaker is designed for use in hazardous locations. The unit produces a crisp, clear, high-decibel tone. The tone may be generated by the PowerTone Signaling System of by a compact, solid-state, plugin card. The speaker cone and projector are of spun aluminum. The circuitry and tone card are contained in dust and moisture proof sealed housing of die-cast aluminum. An internal gain control allows for volume adjustment. The amplified speaker is Listed for indoor and outdoor use, is NEMA 3 rated, and is finished in red enamel. Model ASHH Amplified Speakers operate at 24 VDC and are polarized for connection to system supervised alarm notification circuits. Application The PowerTone Amplified Speaker is well suited for signaling in hazardous areas with high ambient noise levels and where a unique audible signal is required. The speaker is suitable for use in National Electrical Code (NFPA 70); Class I, Groups A, B, C, and D, Division 2; Class II, Groups F, G, Division 2; Class III hazardous locations. When used in conjunction with the PowerTone Signaling System and PTCK25 connector card, the speaker can produce multiple tones for various signal requirements. For single tone applications the PowerTone Signaling System or universal tone card may be used. The speaker may be used with any compatible 25 or 70Vrms audio system by using the PTCK25 or PTCK70 connector card. The speaker can be indoor or outdoor mounted. The ASHH is NEMA 3 rated. Features 24 VDC polarized operation. UL sound pressure level 97dB(A) at 10 feet, (see chart). Multiple tone capability (w/PowerTone System & PTCK). Wide selection of tone cards (single tone applications). Voice capable with PTCK audio interface card. Spun aluminum cone and projector. Die-cast aluminum circuitry housing. NEMA 3 rated enclosure. Internal gain control. Indoor and outdoor mounting.		Description CPG Signals Model ASHP PowerTone Amplified Speaker produces a crisp, clear, highdecibel tone. The tone may be generated by the PowerTone Signaling System by a compact, solid-state, plug-in card. The speaker cone and projector are of spun aluminum. The circuitry and tone card are contained in dust and moisture proof sealed housing of die-cast aluminum. An internal gain control allows for volume adjustment. The amplified speaker is NEMA 3 rated, and is finished in red enamel. Model ASHP Amplified Speakers operate at 24 VDC and are polarized for connection to system supervised alarm notification circuits. The ASHP is also available in a 120 VAC model. CPG model V1971 synchronized strobe lights are available as an option when visual signaling is required. Strobes can be synchronized using Model VSYNC sync module. Both the speaker and strobe are listed for indoor and outdoor use. Application The PowerTone Amplified Speaker is well suited for signaling in hazardous areas with high ambient noise levels and where a unique audible signal is required. When used with the PowerTone Signaling System and PTCK25 connector card, the speaker can produce multiple tones for various signal requirements. For single tone applications the PowerTone Signaling System or universal tone card may be used. The speaker may be used with any compatible 25 or 70Vrms audio system by using the PTCK25 or PTCK70 connector card. The speaker can be indoor or outdoor mounted. The ASHP is NEMA 3 rated. Features 24 VDC polarized operation. 120 VAC model available. UL sound pressure level (see chart). Multiple tone capability (w/PowerTone System & PTCK). Wide selection of tones Voice capable with PTCK audio interface card. Die-cast aluminum circuitry housing. Internal gain control. NEMA 3 rated enclosure. Indoor and outdoor mounting. Optional V1971 sync/non-sync strobe lights available in 15/75, 30/75, 75, and 110 candela models. ADA compliant. Independent or simultaneous strobe operation.


Commercial Products Group ASHPACSMR - Amplified Speaker, 120VAC, Red Our Price : $380.28		Commercial Products Group ASHPD24SR - Amplified Speaker Strobe Hi-Power 15/75CD Our Price : $404.25

Description CPG Signals Model ASHP PowerTone Amplified Speaker produces a crisp, clear, highdecibel tone. The tone may be generated by the PowerTone Signaling System by a compact, solid-state, plug-in card. The speaker cone and projector are of spun aluminum. The circuitry and tone card are contained in dust and moisture proof sealed housing of die-cast aluminum. An internal gain control allows for volume adjustment. The amplified speaker is NEMA 3 rated, and is finished in red enamel. Model ASHP Amplified Speakers operate at 24 VDC and are polarized for connection to system supervised alarm notification circuits. The ASHP is also available in a 120 VAC model. CPG model V1971 synchronized strobe lights are available as an option when visual signaling is required. Strobes can be synchronized using Model VSYNC sync module. Both the speaker and strobe are listed for indoor and outdoor use. Application The PowerTone Amplified Speaker is well suited for signaling in hazardous areas with high ambient noise levels and where a unique audible signal is required. When used with the PowerTone Signaling System and PTCK25 connector card, the speaker can produce multiple tones for various signal requirements. For single tone applications the PowerTone Signaling System or universal tone card may be used. The speaker may be used with any compatible 25 or 70Vrms audio system by using the PTCK25 or PTCK70 connector card. The speaker can be indoor or outdoor mounted. The ASHP is NEMA 3 rated. Features 24 VDC polarized operation. 120 VAC model available. UL sound pressure level (see chart). Multiple tone capability (w/PowerTone System & PTCK). Wide selection of tones Voice capable with PTCK audio interface card. Die-cast aluminum circuitry housing. Internal gain control. NEMA 3 rated enclosure. Indoor and outdoor mounting. Optional V1971 sync/non-sync strobe lights available in 15/75, 30/75, 75, and 110 candela models. ADA compliant. Independent or simultaneous strobe operation.		Description CPG Signals Model ASHP PowerTone Amplified Speaker produces a crisp, clear, highdecibel tone. The tone may be generated by the PowerTone Signaling System by a compact, solid-state, plug-in card. The speaker cone and projector are of spun aluminum. The circuitry and tone card are contained in dust and moisture proof sealed housing of die-cast aluminum. An internal gain control allows for volume adjustment. The amplified speaker is NEMA 3 rated, and is finished in red enamel. Model ASHP Amplified Speakers operate at 24 VDC and are polarized for connection to system supervised alarm notification circuits. The ASHP is also available in a 120 VAC model. CPG model V1971 synchronized strobe lights are available as an option when visual signaling is required. Strobes can be synchronized using Model VSYNC sync module. Both the speaker and strobe are listed for indoor and outdoor use. Application The PowerTone Amplified Speaker is well suited for signaling in hazardous areas with high ambient noise levels and where a unique audible signal is required. When used with the PowerTone Signaling System and PTCK25 connector card, the speaker can produce multiple tones for various signal requirements. For single tone applications the PowerTone Signaling System or universal tone card may be used. The speaker may be used with any compatible 25 or 70Vrms audio system by using the PTCK25 or PTCK70 connector card. The speaker can be indoor or outdoor mounted. The ASHP is NEMA 3 rated. Features 24 VDC polarized operation. 120 VAC model available. UL sound pressure level (see chart). Multiple tone capability (w/PowerTone System & PTCK). Wide selection of tones Voice capable with PTCK audio interface card. Die-cast aluminum circuitry housing. Internal gain control. NEMA 3 rated enclosure. Indoor and outdoor mounting. Optional V1971 sync/non-sync strobe lights available in 15/75, 30/75, 75, and 110 candela models. ADA compliant. Independent or simultaneous strobe operation.


Commercial Products Group ASHPJ24SR - Amplified Speaker/Strobe ,Hi-Power ,30/75CD, 24VDC Red Waterproof Our Price : $423.27		Commercial Products Group ASHPM24SMR - Amplified Speaker/Strobe, High Power, 75CD Sync/NS, 24VDC, Red, W-Proof Our Price : $423.27

Description CPG Signals Model ASHP PowerTone Amplified Speaker produces a crisp, clear, highdecibel tone. The tone may be generated by the PowerTone Signaling System by a compact, solid-state, plug-in card. The speaker cone and projector are of spun aluminum. The circuitry and tone card are contained in dust and moisture proof sealed housing of die-cast aluminum. An internal gain control allows for volume adjustment. The amplified speaker is NEMA 3 rated, and is finished in red enamel. Model ASHP Amplified Speakers operate at 24 VDC and are polarized for connection to system supervised alarm notification circuits. The ASHP is also available in a 120 VAC model. CPG model V1971 synchronized strobe lights are available as an option when visual signaling is required. Strobes can be synchronized using Model VSYNC sync module. Both the speaker and strobe are listed for indoor and outdoor use. Application The PowerTone Amplified Speaker is well suited for signaling in hazardous areas with high ambient noise levels and where a unique audible signal is required. When used with the PowerTone Signaling System and PTCK25 connector card, the speaker can produce multiple tones for various signal requirements. For single tone applications the PowerTone Signaling System or universal tone card may be used. The speaker may be used with any compatible 25 or 70Vrms audio system by using the PTCK25 or PTCK70 connector card. The speaker can be indoor or outdoor mounted. The ASHP is NEMA 3 rated. Features 24 VDC polarized operation. 120 VAC model available. UL sound pressure level (see chart). Multiple tone capability (w/PowerTone System & PTCK). Wide selection of tones Voice capable with PTCK audio interface card. Die-cast aluminum circuitry housing. Internal gain control. NEMA 3 rated enclosure. Indoor and outdoor mounting. Optional V1971 sync/non-sync strobe lights available in 15/75, 30/75, 75, and 110 candela models. ADA compliant. Independent or simultaneous strobe operation.		Description CPG Signals Model ASHP PowerTone Amplified Speaker produces a crisp, clear, highdecibel tone. The tone may be generated by the PowerTone Signaling System by a compact, solid-state, plug-in card. The speaker cone and projector are of spun aluminum. The circuitry and tone card are contained in dust and moisture proof sealed housing of die-cast aluminum. An internal gain control allows for volume adjustment. The amplified speaker is NEMA 3 rated, and is finished in red enamel. Model ASHP Amplified Speakers operate at 24 VDC and are polarized for connection to system supervised alarm notification circuits. The ASHP is also available in a 120 VAC model. CPG model V1971 synchronized strobe lights are available as an option when visual signaling is required. Strobes can be synchronized using Model VSYNC sync module. Both the speaker and strobe are listed for indoor and outdoor use. Application The PowerTone Amplified Speaker is well suited for signaling in hazardous areas with high ambient noise levels and where a unique audible signal is required. When used with the PowerTone Signaling System and PTCK25 connector card, the speaker can produce multiple tones for various signal requirements. For single tone applications the PowerTone Signaling System or universal tone card may be used. The speaker may be used with any compatible 25 or 70Vrms audio system by using the PTCK25 or PTCK70 connector card. The speaker can be indoor or outdoor mounted. The ASHP is NEMA 3 rated. Features 24 VDC polarized operation. 120 VAC model available. UL sound pressure level (see chart). Multiple tone capability (w/PowerTone System & PTCK). Wide selection of tones Voice capable with PTCK audio interface card. Die-cast aluminum circuitry housing. Internal gain control. NEMA 3 rated enclosure. Indoor and outdoor mounting. Optional V1971 sync/non-sync strobe lights available in 15/75, 30/75, 75, and 110 candela models. ADA compliant. Independent or simultaneous strobe operation.