You are here: Home > Burglar Alarms / Intrusion >

Alarm Communication Equipment for Burglar Alarm Systems

>

IP Alarm Communication Equipment for Burglar Systems

We found 4 results matching your criteria.
Alarm systems can be set for monitoring and control through any station with an IP connection. Security Store USA delivers IP-enabled home alarms that allow the adjustment of parameters and communication with monitoring stations through this near-universal technology. We also provide burglar alarms that send alerts via mobile device and e-mail.
Sort By:
Page of 1
AlarmNet 7810IR-ENT Intranet Receiver AlarmNet 7845I-ENT Enterprise Internet Communicator

Honeywell’s 7810iR-ENT receiver provides a private network solution combined with the capability to process Internet communications. It is capable of monitoring 7845i-ENTIntranet communications within a local area network, providing a local secure monitoring point for a private network. LAN.

The 7810iR-ENT can be easily installed in conjunction with an ADEMCO receiver or directly interfaced with the central station automation package. It has an easy-to-use touchscreen that provides a clear and simple user interface.

The 7810iR-ENTmay utilize the Internet to receive signals from any device capable of AlarmNet communications. In this configuration, the AlarmNet Control Center will route signals from AlarmNet subscribers to the 7810iR-ENT.

The AlarmNet Control Center is fully redundant and monitored 24 hours a day, seven days a week. AlarmNet has the ability to route messages using the AlarmNet “A”, AlarmNet “M”, AlarmNet “i” and 800 plus networks; all of which provide true redundancy and the highest reliability in message delivery.

  • Compatible with all AlarmNet radios

  • AlarmNet Network Control Center can route A, C, or M service signals to the 7810iR/7810iR-ent receivers

  • Unlimited account capacity

  • 7810iR can be viewed remotely with proper authorization

  • Easy Cat-5 connection to a hub or router

  • Installs behind firewalls without compromising network security router

  • Plug & Play installation

  • 7810iR works with dynamic or static IP addressing

  • Highest levels of data security:

    • 1,024 bit key encryption standard

    • Two-way authentication is applied between protected premise and the 7810iR Receiver

    • No key exchange occurs assuring maximum data protection

    • Programs via the touchscreen display

  • Remote control ready

Honeywell’s 7845i-ENT communicator provides a private network solution using LAN connections combined with the capability to communicate via the Internet. The 7845i-ENT offers a fully encrypted, secure method of delivering alarm messages from the subscriber to the central station within a private network or using the Internet.

The 7845i-ENT can be easily installed in conjunction with a 7810iR-ENT for private network applications. Private network communication is contained within the LAN and is not routed through the AlarmNet Control Center. Internet applications may be configured using 7810iR or 7810iR-ENT Internet receivers. The AlarmNet 800 Plus service allows routing from the 7845i-ENT to a Honeywell receiver via the AlarmNet Control Center.

The AlarmNet Control Center is fully redundant and monitored 24 hours a day, seven days a week. AlarmNet has the ability to route messages using the AlarmNet-A, AlarmNet-M, AlarmNet-i and 800 Plus networks; all of which provide true redundancy and the highest reliability in message delivery.

Private Network Application

  • Compatible with 7810iR-ENT Enterprise Intranet Receiver
  • Up to 1,000 accounts per receiver

    Internet Application

  • Unlimited account capacity
  • Remote control with optional Symphony services Features
  • Reports signals via Private Intranet or via Internet
  • Easy CAT-5 10BT connection to a hub or router
  • Installs behind firewalls without compromising network security
  • Dynamic or static IP addressing

    Highest Level of Data Security

  • 1,024 bit key encryption
  • Optional AES-Advanced Encryption Standard
  • - FIPS 197 approved algorithm
  • - NIST Certificate #142 viewable at http://csrc.nist.gov/cryptval/aes/aesval.html
  • Two-way authentication
  • No key exchange for maximum data protection
  • Quick connection to compatible Honeywell control panels
  • Flash memory architecture ensures future flexibility
  • Supports IP downloading with select VISTA control panels via
  • Internet or Intranet applications

    AlarmNet 7720P Programmer PROGRAMMING TOOL REQUIRED TO PROGRAM THIS UNIT

  • Honeywell 7847i  Internet Communicator Honeywell 7847i-L  Integrated IP Communicator for LYNX

    Honeywell’s 7847i Series is the next generation family of IP Communicators designed to meet today’s demand for viable communication alternatives.

    The 7847i delivers highly secure, reliable, Internet communication of alarm data while the 7847i-E is suitable for enterprise private network applications using local LAN or point to point connections.

    Internet signals are delivered to Honeywell’s AlarmNet Network Control Center, which routes the information to the appropriate central station. The state of the art AlarmNet Network Control Center is fully redundant and monitored 24/7. AlarmNet has the ability to route messages using the AlarmNet-A, AlarmNet-M, AlarmNet-i and 800 PLUS services, providing true redundancy and multi-path message delivery.

    Features:

    • Secure IP Reporting
      - Reports signals via Internet or Intranet (7847i-E only)
      - Uses 256-bit Advanced Encryption Standard or optional 1,024 bit encryption with two-way authentication and no key exchange for maximum data protection.
    • Dialer Capture Ready
      - Compatible with Dialer Capture Intelligence Device (non-ecp capable LYNX) or DCID-EXT (other control panels). Captures Contact ID messages from the panel’s phone line and sends them to the central station via the IP communicator.
    • Universal Control Panel Compatibility
      - Flexible modes of operation allow ECP full alarm reporting by Honeywell control panels, 4204 relay mode for Honeywell controls that do not support ECP alarm reporting and zone triggering for use with other control panels.
      - LYNXR-I integration with 7847i-L
    • Full Contact ID or ADEMCO High Speed Reporting
      - ECP mode with compatible Honeywell control panels support full Contact ID reporting. All other modes use ADEMCO High Speed reporting format.
    • Six Input Zones
      - Each zone can be configured for +V, -V, or EOLR triggering. Each zone can be programmed for inverted operation, delayed reporting and restoral reporting. Zone 1 can distinguish between pulsed and steady inputs (7847i/7847i-E).
    • Tamper Protected Enclosure
      - Built-in tamper sends a report when a tamper condition is detected and a restore when cleared.
    • Remote Services Capability*
      - Control Honeywell control panels via Internet or mobile device and e-mail notification of system events. * Requires optional Honeywell Total Connect service
    • Network Friendly
      - Installs behind firewalls without compromising network security— dynamic or static IP addressing
    • Ease of installation
      - Easy CAT-5 10 BaseT connection to a hub or router-Quick connection to compatible Honeywell series control panels.
      - Simple programming using a 7720P programmer, AlarmNet Direct website or via LYNXR-I (7847i-L).
    • Upload/Download
      - With select Honeywell control panels. Requires Compass version 1.5.8.54a or higher.

    Honeywell’s 7847i Series is the next generation family of IP Communicators designed to meet today’s demand for viable communication alternatives.

    The 7847i delivers highly secure, reliable, Internet communication of alarm data while the 7847i-E is suitable for enterprise private network applications using local LAN or point to point connections.

    Internet signals are delivered to Honeywell’s AlarmNet Network Control Center, which routes the information to the appropriate central station. The state of the art AlarmNet Network Control Center is fully redundant and monitored 24/7. AlarmNet has the ability to route messages using the AlarmNet-A, AlarmNet-M, AlarmNet-i and 800 PLUS services, providing true redundancy and multi-path message delivery.

    Features:

    • Secure IP Reporting
      - Reports signals via Internet or Intranet (7847i-E only)
      - Uses 256-bit Advanced Encryption Standard or optional 1,024 bit encryption with two-way authentication and no key exchange for maximum data protection.
    • Dialer Capture Ready
      - Compatible with Dialer Capture Intelligence Device (non-ecp capable LYNX) or DCID-EXT (other control panels). Captures Contact ID messages from the panel’s phone line and sends them to the central station via the IP communicator.
    • Universal Control Panel Compatibility
      - Flexible modes of operation allow ECP full alarm reporting by Honeywell control panels, 4204 relay mode for Honeywell controls that do not support ECP alarm reporting and zone triggering for use with other control panels.
      - LYNXR-I integration with 7847i-L
    • Full Contact ID or ADEMCO High Speed Reporting
      - ECP mode with compatible Honeywell control panels support full Contact ID reporting. All other modes use ADEMCO High Speed reporting format.
    • Six Input Zones
      - Each zone can be configured for +V, -V, or EOLR triggering. Each zone can be programmed for inverted operation, delayed reporting and restoral reporting. Zone 1 can distinguish between pulsed and steady inputs (7847i/7847i-E).
    • Tamper Protected Enclosure
      - Built-in tamper sends a report when a tamper condition is detected and a restore when cleared.
    • Remote Services Capability*
      - Control Honeywell control panels via Internet or mobile device and e-mail notification of system events. * Requires optional Honeywell Total Connect service
    • Network Friendly
      - Installs behind firewalls without compromising network security— dynamic or static IP addressing
    • Ease of installation
      - Easy CAT-5 10 BaseT connection to a hub or router-Quick connection to compatible Honeywell series control panels.
      - Simple programming using a 7720P programmer, AlarmNet Direct website or via LYNXR-I (7847i-L).
    • Upload/Download
      - With select Honeywell control panels. Requires Compass version 1.5.8.54a or higher.
       
     
    IP Alarm Communication Equipment for Burglar Systems
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please