You are here: Home > Burglar Alarms / Intrusion >

Sensors for Burglar Alarm Systems

>

Glass-Break Detectors for Burglar Alarm Systems

> IntelliSense
We found 14 results matching your criteria.
IntelliSense Glass-Break Detectors
Sort By:
Page of 2
IntelliSense by Honeywell FG-1615  Glassbreak Detector IntelliSense CK-FG1025Z Directional Glassbreak Detector
The new FG-1615 Glassbreak Detector uses the latest technology to provide faster response and increased false alarm immunity. The FG-1615 is designed to allow fast and easy installation. Optimum operation can be quickly
verified using the FG-701 Glassbreak Simulator.
  • Digital Signal Processing for advanced detection and false alarm immunity. Listens only for the sound of breaking glass from the protected glass zone using patented "Time of Arrival" zone processing and 2 microphones

  • Ceiling mount design for discreet styling

  • Detects all types of glass plate, tempered, wired, laminated, coated, sealed insulated

  • Fast and accurate testing with the FG-701 handheld glassbreak simulator

  • Flexguard Glassbreak Detection Sets You Apart from the Competition
      View the video  

    IntelliSense CK-FG1625 Glassbreak Detector IntelliSense CK-FG1625R Glassbreak Detector

    FG-1625 Glassbreak Detector

    The new FG-1625 Glassbreak Detector uses the latest technology to provide faster response and increased false alarm immunity. The FG-1625 is specifically designed to allow fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG-701 Glassbreak Simulator.

    FlexCore™ Signal Processor
    The FlexCore Signal Processor is an Application-Specific Integrated Circuit (ASIC), which processes sound data in parallel rather than sequentially for faster, more accurate detection decisions. The combination of proven FlexGuard® performance with the speed of FlexCore processing provides unmatched false alarm immunity without compromising detection.

    Easy Installation and Setup
    Honeywell’s patented technology allows remote activation of Test Mode (with simulator). The FG-1625 has a centered wire entry hole, 45° terminal blocks and EOL terminals. A hand-clap feature verifies that the detector is functioning.

    Selectable Sensitivity
    Two DIP switches on the FG-1625 make it easy to set the sensitivity to match the acoustics of the room. Four different sensitivity levels are available, ranging from very low to high. The range can then be verified remotely with the FlexGuard FG-701 Glassbreak Simulator.

    Mount the Detector Anywhere
    Mounts on any wall, in the window frame, or on the ceiling, with no minimum range and a maximum range of 25' (7.6m) to the glass.

    Covers All Glass Types
    The FG-1625 works on all glass types, including plate, tempered, laminated, wired, film-coated and sealed insulating glass.

    Multiple Domain Signal Analysis
    The FG-1625 performs Multiple Domain Signal Analysis in which time, frequency and amplitude characteristics are evaluated for signal qualification. This enables the detector to accurately discriminate false alarms from true glassbreak events.

    Enclosed PC Board
    The PCB is protected from potential damage during installation.

    Patented Remote Test Mode
    The Patented Remote Test Mode can enabled or disable the indicator LEDs using the FG-701 Glassbreak Simulator. The unit automatically resets from Test Mode in five minutes. 

    Mounting Locations
    The FG-1625 can be mounted on the ceiling, opposite wall, adjoining wall or the same wall as the glass.

    The new FG-1625R Glassbreak Detector uses the latest technology to provide faster response and increased false alarm immunity. The FG-1625R is specifically designed to allow fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG-701 Glassbreak Simulator.

    Flexguard Glassbreak Detection Sets You Apart from the Competition
      View the video  

    IntelliSense CK-FG1625RFM - Round Flush Mount Glassbreak Detector IntelliSense CK-FG1625RT - Round Case Glassbreak Detector with Tamper

    The FG1625RFM Glassbreak Detector uses field proven FlexGuard® technology to provide faster response and increased false alarm immunity. The FG1625RFM is specifically designed to allow a fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG701 Glassbreak Simulator.

    FlexCore™ Signal Processor
    The FlexCore Signal Processor is an Application-Specific Integrated Circuit (ASIC), which processes sound data in parallel rather than sequentially for faster, more accurate detection decisions. The combination of proven FlexGuard® performance with the speed of FlexCore processing provides unmatched false alarm immunity without compromising detection.
  • Easy Installation and Setup
    Honeywell’s patented technology allows remote activation of Test Mode (with simulator). The FG1625RFM recesses in a 1.0" (26mm) diameter hole through a false ceiling or sheetrock. A hand-clap feature verifies that the detector is functioning.
  • Selectable Sensitivity
    Two dip switches on the FG1625RFM make it easy to set the sensitivity to match the acoustics of the room. Four different sensitivity levels are available, ranging from very low to high. The range can then be verified remotely with the FlexGuard FG701 Glassbreak Simulator.
  • Mount the Detector Anywhere
    Flush mounts in any wall, or in the ceiling, with no minimum range and a maximum range of 25' (7.6 m) to the glass.
  • Covers All Glass Types
    The FG1625RFM works on all glass types, including plate, tempered, laminated, wired, filmcoated, and sealed insulating glass.
  • Multiple Domain Signal Analysis
    The FG1625RFM performs Multiple Domain Signal Analysis in which time, frequency and amplitude characteristics are evaluated for signal qualification. This enables the detector to accurately discriminate false alarms from true glassbreak events.
  • Patented Remote Test Mode
    The Patented Remote Test Mode can enable or disable the indicator LEDs using the FG701 Glassbreak Simulator. The unit automatically resets from Test Mode in five minutes.
  • Mounting Locations
    The FG1625RFM can be flush mounted in the ceiling, opposite wall, adjoining wall, or the same wall as the glass through a 1" diameter hole.
  • The new FG-1625R Glassbreak Detector uses the latest technology to provide faster response and increased false alarm immunity. The FG-1625R is specifically designed to allow fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG-701 Glassbreak Simulator.

    Features

    FlexCore Signal Processor
    The FlexCore Signal Processor is an Application Specific Integrated Circuit (ASIC), which processes sound data in parallel rather than sequentially for faster, more accurate detection decisions. The combination of proven FlexGuard performance with the speed of FlexCore processing provides unmatched false alarm immunity without compromising detection.

    Easy Installation and Setup
    Honeywell’s patented technology allows remote activation of Test Mode (with simulator). The FG-1625R has a centered wire entry hole, 45º terminal blocks and EOL terminals. A hand-clap feature verifies the detector is functioning.

    Selectable Sensitivity
    Two dip switches on the FG-1625 make it easy to set the sensitivity to match the acoustics of room. Four different sensitivity levels are available, ranging from very low to high. The range can then be verified remotely with the FlexGuard FG-701 Glassbreak Simulator.

    Mount the Detector Anywhere
    Mounts on any wall, in the window frame, or on the ceiling, with no minimum range and a maximum range of 25’ (7.6 m) to the glass

    Covers All Glass Types
    The FG-1625 works on all glass types, including plate, tempered, laminated, wired, film-coated, sealed insulating glass.

    Multiple Domain Signal Analysis
    The FG-1625R performs Multiple Domain Signal Analysis in which time, frequency and amplitude characteristics are evaluated for signal qualification. This enables the detector to accurately discriminate false alarms from true glassbreak events.

    Enclosed PC Board
    The PCB is protected from potential damage during installation.

    Patented Remote Test Mode
    The Patented Remote Test Mode can enable or disable the indicator LEDs remotely using the FG-701 Glassbreak Simulator. The detector automatically resets from Test Mode in five minutes.

    Mounting Locations
    The FG-1625R can be mounted on the ceiling, opposite wall, adjoining wall, or the same wall as the glass.

    IntelliSense CK-FG1625SN VPlex Glassbreak Detector IntelliSense CK-FG701 Glassbreak Simulator
  • Serial number addressable

  • New hinged-case styling same as FG-1625

  • Set-up and performance identical to FG-1625

  • Flexguard Glassbreak Detection Sets You Apart from the Competition
      View the video  

    Glassbreak Simulator

    • Compatible with all IntelliSense and ADEMCO brand glassbreak detectors

    • Calibrated signal output to allow true range verification

    • Remote test-mode activation works from 15 ft away*

    • Low battery voice announcement

    • Digitally produced glassbreak sound

    *when used with FG-1525 and FG-1625 series detectors

    Flexguard Glassbreak Detection Sets You Apart from the Competition
      View the video  

    IntelliSense CK-FG730 Glassbreak Detector Intellisense FG-1608 Glassbreak Detector

    FG-730 Glassbreak Detector

    IntelliSense's FlexGuard FG-730 incorporates the most reliable, field-proven technology available – setting the industry standard in glassbreak detectors.

    Flexguard Glassbreak Detection Sets You Apart from the Competition
      View the video  

    REPLACES IN-FG730

    The FG-1608 is a combination glassbreak detector and magnetic contact that gives you two sensors in one for maximum versatility, performance and value.

     

    Features

    FlexCore™ Signal Processor
    The FlexCore Signal Processor is an Application- Specific Integrated Circuit (ASIC), which processes sound data in parallel rather than sequentially; for faster, more accurate detection decisions. The combination of proven FlexGuard® performance with the speed of FlexCore processing provides unmatched false alarm immunity without compromising detection.

    Glassbreak Plus Forced Entry Detection
    Glassbreak detection is enhanced by a built-in ValueGap® magnetic contact to monitor the opening of doors and windows. The result is double protection from one sensor.

    Selectable Sensitivity
    The sensitivity of the FG-1608 may be set to match the acoustics of the room. Two different sensitivity levels are available; low or high. The range can then be verified remotely with the FlexGuard FG-701 Glassbreak Simulator.

    Mount the Detector Anywhere
    The FG-1608 mounts on any wall, in the window frame, or on the ceiling, with no minimum range and a maximum range of 8’ (2.4 m) to the glass.

    Covers All Glass Types
    The FG-1608 works on all glass types, including plate, tempered, laminated, wired, film-coated, and sealed insulating glass.

    Multiple Domain Signal Analysis
    The FG-1608 performs Multiple Domain Signal Analysis in which time, frequency and amplitude characteristics are evaluated for signal qualification. This enables the detector to accurately discriminate false alarms from true glassbreak events.

    Two Sensors in One ValueGap® Contact
    A built-in reed switch and separate actuator magnet provide forced entry protection in addition to glassbreak detection.

    Indicator LED
    Denotes detection of sound events and alarm condition.

    Alarm Memory
    Alarm LED can be set to latch upon alarm; helps identify which FG-1608 alarmed in multiple detector applications.

    Enclosed PCB
    The PCB is protected from potential damage during installation.

    Remote Test Mode Enable and Disable
    Test mode can be activated remotely with the FG-701 Glassbreak Simulator.

    Test Mode Time Out
    Automatically resets from test mode in five minutes.

    Easy Installation and Set-up
    Mount within 8’ (2.4 m) of the glass to be protected. there is no minimum range. Select either low or high sensitivity.

    Intellisense FG-1625T Glassbreak Detector IntelliSense FG1625F Flush Mount Glassbreak Detector
    Glassbreak Detector FG-1625/1625T The new FG-1625 Glassbreak Detector uses the latest technology to provide faster response and increased false alarm immunity. The FG-1625 is specifically designed to allow fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room. Optimum operation can be quickly verified using the FG-701 Glassbreak Simulator.

    • FlexCore™ Signal Processor The FlexCore Signal Processor is an Application-Specific Integrated Circuit (ASIC), which processes sound data in parallel rather than sequentially for faster, more accurate detection decisions. The combination of proven FlexGuard performance with the speed of FlexCore processing provides unmatched false alarm immunity without compromising detection.

    • Easy Installation and Setup IntelliSense’s patented technology allows remote activation of Test Mode (with simulator). The FG- 1625 has a centered wire entry hole, 45° terminal blocks, and EOL terminals. A hand-clap feature verifies that the detector is functioning.

    • Selectable Sensitivity Two dip switches on the FG-1625 make it easy to set the sensitivity to match the acoustics of the room. Four different sensitivity levels are available, ranging from very low to high. The range can then be verified remotely with the FlexGuard FG-701 Glassbreak Simulator.

    • Mount the Detector Anywhere Mounts on any wall, in the window frame, or on the ceiling, with no minimum range and a maximum range of 25’ (7.6 m) to the glass.

    • Covers All Glass Types The FG-1625 works on all glass types, including plate, tempered, laminated, wired, film-coated, and sealed insulating glass.

    • Multiple Domain Signal Analysis The FG-1625 performs Multiple Domain Signal Analysis in which time, frequency and amplitude characteristics are evaluated for signal qualification. This enables the detector to accurately discriminate false alarms from true glassbreak events.

    • Enclosed PC Board The PCB is protected from potential damage during installation.

    • Patented Remote Test Mode The Patented Remote Test Mode can enabled or disable the indicator LEDs using the FG-701 Glassbreak Simulator. The unit automatically resets from Test Mode in five minutes.

    • Mounting Locations The FG-1625 can be mounted on the ceiling, opposite wall, adjoining wall, or the same wall as the glass.

    The new FG-1625F Glassbreak Detector uses the latest technology to provide faster response and increased false alarm immunity. The FG-1625F is specifically designed to allow fast, easy installation, while the adjustable sensitivity settings can compensate for the acoustics of any room.

    Optimum operation can be quickly verified using the FG-701 Glassbreak Simulator. The FG-1625F was designed to adequately cover all sizes of single gang electrical boxes. Flush mount installations are now easier and better looking than ever.

    Flexguard Glassbreak Detection Sets You Apart from the Competition
     View the video  

       
     
    IntelliSense Glass-Break Detectors
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please