You are here: Home > CCTV / Surveillance > Digital Video Recorders - DVRs > DVRs Accessories > Joysticks
We found 12 results matching your criteria.
Joysticks
Sort By:
Page of 1
Advanced Technology SDC5LCDN High Speed PTZ Dome Camera Controller with Integrated 5" LCD Monitor, 3-Axis, Joystick Dedicated Micros  SYSKBD Optical Keyboard for System Sprite w/Joystick
  • 5 TFT LCD Adjustable Color Monitor
  • Pan, Tilt & Zoom Joystick Control
  • Focus & Iris Buttons
  • Keyboard Hotkeys
  • Password Protection
  • On-Screen Menus
  • On-Screen Compass Display
  • Optional Multi-User Support
  • Controls up to 100 Multiplexers (or DVRs) + 32 Speed Domes
  • Dedicated Micros SYSKBD Optical Keyboard for System Sprite w/Joystick
    Dedicated Micros KBC2 - KEYBOARD WITH JOYSTICK FOR SD SERIES DVR Honeywell Video HEGS5300 - Full-function MAX-1000 keyboard w/ 3D joystick & generic overlay. Includes 12V dc power supply.
    The Dedicated Micros KBC1/KBC2 remote digital keyboards allow products such as the SD DVR to be controlled remotely.

    The keyboards also include PTZ control with the 3-axis joystick on the KBC2 enabling an Operator to easily control pan, tilt and zoom functionality. The additional telemetry buttons ensure any telemetry features on DM or Dennard domes can be accessed and controlled via either keyboard. The majority of features on 3rd party PTZ and Dome cameras are additionally supported.

    Supported Dedicated Micros products:
    The following DM products are fully compatible with the KBC1/KBC2 keyboards:

  • SD DVR
  • NetVu Console
  • DV-IP RT Server
  • High Vu

    Note: All KBC1/KBC2 connectivity is via an RJ12 cable. If connection to a 485-bus product is required (i.e. a DM NetVu connected DS2 DVR), please refer to the DM KBS3A keyboard. Connecting To NetVu connected products.

    Local Connection:
    Both the KBC1 and KBC2 are supplied with an RJ12 cable. All Data and Power connections are provided over this. If connection is required over a distance greater than 5 metres, an additional local power supply connection is required.

    Remote Connection:
    Both the KBC1 and KBC2 can be connected to a DVR over a distance of up to 1km, using a screened twisted pair cable. This configuration will require a breakout cable connection and a keyboard Power Supply Unit (PSU).
    An Accessory kit (ref no:DM/KBC/ACC) enables remote connection using dual break out boxes and a remote PSU.
  • HEGS5300 - Full-function MAX-1000 keyboard w/ 3D joystick & generic overlay. Includes 12V dc power supply.

    The HEGS5300 is a fully programmable, 101-key keyboard with three-dimensional joystick for control of the MAX-1000 and minMAX systems. A power supply is not included.

    Features

  • 101 fully programmable keys
  • Three-dimensional, rate-proportional joystick
  • 1-99 keyboard ID
  • RS-232 connection to MAX-1000
  • Custom overlays
  • LCD display for operation data

    REPLACEMENT PART FOR UL-KEGS5300,KT

  • I3 DVR 8O-DA5 Ptz Jocstick Controller - I3 DVR 8O-DA5 ID-View IV-7312-S CCTV Control Keyboard - 2 Axis Joystick and DVR Or PTZ Camera Remote Control Keyboard, Manual Pan/Tilt - 16 Cam/1 Mux - 12v DC/5W
    I3 DVR 8O-DA5 Ptz Jocstick Controller - I3 DVR 8O-DA5

    The IV-731X family of control keyboards harnesses the latest hardware and firmware technology to give you the best solution for surveillance control. Multiple cameras, Multiplexers and DVRs can be effortlessly setup and controlled via the IV-731X. Through the built-in RS232 port, the latest control firmware can be upgraded easily, assuring you the flexibility of customization unmatched by others.

    IV-7312-S is a basic control keyboard used for smaller CCTV system, up to 16 high speed dome cameras are mapped directly to the 16 hot keys on the front panel. IV-7313-H is useful in a large CCTV system, up to 223 Dome cameras and 16 Multiplexers/ DVRs can be controlled by 16 keyboards.

    Dependability and ultra-high reliability are key factors in the IV-731X design cycle. Every IV-731X is assembled with meticulous care and thorough testing at our ISO9001 compliant factory. High performance, reliability, and reasonable pricing, IV-731X is an ideal solution for your tough surveillance requirements.

    Features:

  • RS-485 port for CCTV system control
  • Built-in DSCP, Pelco D&P protocol
  • Joystick control of PTZ functions
  • Preset position and Cruise control
  • User-friendly interface
  • Firmware upgrade via RS-232
  • Control Dome cameras, P/T/Z Receivers, Multiplexers, DVRs
  • Maximum 255 devices can be controlled on the same bus, included 223 Dome Cameras or Receivers, 16 System Keyboards, 16 Multiplexers (or DVRs) (only on D7313)
  • Built-in Real Time Clock (only on D7313)
  • Support System Clock Calibration (only on D7313)
  • Optional 2-axis joystick

    Specifications:

  • Power: 12 Volt DC
  • Power Consumption: 5W
  • RS-485 port: RJ-11, Terminal Blockx1
  • RS-232 port: D-SUB 9pin x 1
  • Device on Bus: IV-7312-S: 16 Cameras, 1 Multiplexer, IV-7313-H: 255 Devices maximum, 16 Multiplexers
  • Pan/Tilt Control: Manual Pan/Tilt
  • Preset: 128 maximum
  • Auto Pan: On/Off
  • Sequence: 4 Minimum
  • Cruise: On/Off
  • Lens Control
  • Zoom: Tele/Wide
  • Focus: Near/Far, Auto
  • Iris: Open/Close, Auto
  • Camera Setup: Yes
  • Multiplexer Control: Channel select: 16
  • Multiplexer Setup: Yes
  • Dimensions (L x W x H): 330 x 175 x 65 mm (139 x 6.9 x 2.6 inches)
  • Operation Temperature: 0~40 (32 to 104)
  • Operation Humidity: Below 90%, non-condensing
  • Weight: 1.5kg (3.3 lbs)
  • ID-View IV-7313-H CCTV Control Keyboard - 3 Axis Joystick and Advanced DVR Or PTZ Camera Remote Control Keyboard, Manual Pan/Tilt - 255 Dec/16 Mux's - 12v DC or 24V AC VICON INDUSTRIES VC-V1411JDVC Keyboard Controler W/Joystick - VICON INDUSTRIES VC-V1411JDVC
    The IV-731X family of control keyboards harnesses the latest hardware and firmware technology to give you the best solution for surveillance control. Multiple cameras, Multiplexers and DVRs can be effortlessly setup and controlled via the IV-731X. Through the built-in RS232 port, the latest control firmware can be upgraded easily, assuring you the flexibility of customization unmatched by others.

    IV-7312-S is a basic control keyboard used for smaller CCTV system, up to 16 high speed dome cameras are mapped directly to the 16 hot keys on the front panel. IV-7313-H is useful in a large CCTV system, up to 223 Dome cameras and 16 Multiplexers/ DVRs can be controlled by 16 keyboards.

    Dependability and ultra-high reliability are key factors in the IV-731X design cycle. Every IV-731X is assembled with meticulous care and thorough testing at our ISO9001 compliant factory. High performance, reliability, and reasonable pricing, IV-731X is an ideal solution for your tough surveillance requirements.

    Features:

  • RS-485 port for CCTV system controlnn
  • Built-in DSCP, Pelco D&P protocol
  • Joystick control of PTZ functions
  • Preset position and Cruise control
  • User-friendly interface
  • Firmware upgrade via RS-232
  • Control Dome cameras, P/T/Z Receivers, Multiplexers, DVRs
  • Maximum 255 devices can be controlled on the same bus, included 223 Dome Cameras or Receivers, 16 System Keyboards, 16 Multiplexers (or DVRs) (only on D7313)
  • Built-in Real Time Clock (only on D7313)
  • Support System Clock Calibration (only on D7313)
  • Optional 2-axis joystick

    Specifications:

  • Power: 12 Volt DC
  • Power Consumption: 5W
  • RS-485 port: RJ-11, Terminal Blockx1
  • RS-232 port: D-SUB 9pin x 1
  • Device on Bus: IV-7312-S: 16 Cameras, 1 Multiplexer, IV-7313-H: 255 Devices maximum, 16 Multiplexers
  • Pan/Tilt Control: Manual Pan/Tilt
  • Preset: 128 maximum
  • Auto Pan: On/Off
  • Sequence: 4 Minimum
  • Cruise: On/Off
  • Lens Control
  • Zoom: Tele/Wide
  • Focus: Near/Far, Auto
  • Iris: Open/Close, Auto
  • Camera Setup: Yes
  • Multiplexer Control: Channel select: 16
  • Multiplexer Setup: Yes
  • Dimensions (L x W x H): 330 x 175 x 65 mm (139 x 6.9 x 2.6 inches)
  • Operation Temperature: 0X~40X (32X to 104X)
  • Operation Humidity: Below 90%, non-condensing
  • Weight: 1.5kg (3.3 lbs)
  • VICON INDUSTRIES VC-V1411JDVC Keyboard Controler W/Joystick - VICON INDUSTRIES VC-V1411JDVC


    The standalone configuration is designed to allow the keypads to control a system comprised of domes and/or receivers but not a matrix or CPU. A single keypad can control 255 fully-functional variable-speed domes.In NOVA configuration, the keypads are designed to communicate with a Pilot/NOVA matrix system or ViconNet system to provide total operational support for the system, whatever the number of inputs and outputs. Up to 64 keypads can be included in a system, depending on matrix type. Control of variable-speed fully-functional domes and cameras is standard. Reliable serial communications is achieved using a four wire half duplex RS-422 protocol.In standalone configuration, it is possible to operate in simplex mode, although indications of autoiris, autopan and auxiliary status will not be displayed in the LCD window.Five modes are available to provide operation, programming and keypad setup. Normal operation mode is always entered after start up of the keypad. A preset store mode saves a programmed pan-and-tilt position for future recall. Sequencing dwell times may be set in the Set Dwell mode used for NOVA installationsonly. In a keypad setup mode, the keypad address, baud rate,joystick profile and LCD contrast may be defined. The buzzer,home position (return to preset 1 position upon an active alarm)and alarm acknowledgement requirements may also be enabled or disabled in the keypad setup mode. In a separate keypad test mode, pan and tilt coordinates are displayed and allow foradjustment of deflection and center.Finished in black "walnut" enamel, the keypads have tactile robust pushbuttons in two shades of gray and a reliable positive variable-speed joystick for precise control.

    Videolarm VLC485 - RS485 controller (2) RS232 ports/ (1) RS485port/joystick control. Desk top model/24vac input power Dedicated Micros DM/ DVPB/ CON - Remote Video Surveillance System Console with Joystick Control, with PTZ cameras support - DVPBCON
    Videolarm VLC485 - RS485 controller (2) RS232 ports/ (1) RS485port/joystick control. Desk top model/24vac input power

    DESCRIPTION

    The compact, desktop VLC485 provides PTZ control, programming capabilities, camera callup, sequences and auto tours, and it will work as a stand-alone operation or a serial port for connection to a PC can be used as an interface for user application software. The unit can interact with a multiplexor to allow multiple camera monitoring with single button convenience. It can be directly connected to another unit for single-user, multi-unit remote applications. A menu driven configuration and joystick control add to its ease of operation.

    FEATURES

    LCD display
    Menu driven user confi guration, password protected
    Can be used as stand alone or in conjunction with a PC
    Joystick control
    Control for up to 99 pan/tilts
    Supports up to 32 multiplexer channels
    8 alarm inputs and 1 alarm output

    The Dedicated Micros NetVu Console is a remote video surveillance system console with traditional joystick control that gives user the ability to remotely view and playback video as well as control PTZ cameras. The solution allows a traditional PTZ Control keyboard and monitor to be placed anywhere the customer requires. All that is required is an IP connection and power. The NetVu Console communicates with other NetVu Connected DVRs thru the network and converts video streams of selected cameras (live or recorded) for display on a local monitor. Users can now easily have a new monitoring location with only the need of the NetVu Console.

    Features:
  • Easily and quickly deploy a remote viewing station with minimum hardware just the Console
  • Full, quad and 16-channel multisite viewing
  • Digital video streamed from NetVu Connected products through the network to console
  • IP to analog conversion allows use of VGA and composite monitors
  • Simple network connection via Ethernet
  • Transparent Pan-Tilt-Zoom (PTZ) control through an associated DVR 3-axis joystick allows an operator to easily control the PTZ camera functionality with one simple movement
  • Configured via simple web pages
  • Add a main monitor to the DV-IP series
  • Additional control position for DS2, SD and other NetVu Connected DVRs
  • Bi-direction audio

    Functions supported:

    Via Keyboard:
  • DVR / Camera Selection
  • Joystick control of PTZ camera with twist zoom facility
  • Wash/wipe, focus, iris, lamps, preset, patrol and auto-pan keys Play, Pause FFW/REW, GOTO operation
  • Full Screen, Multi Screen & Quad views

    Via unit connections:
  • Monitor Output (VGA and composite)
  • Audio input and output
  • IR remote control
  • GeoVision GV-Joystick  55-JOYSK-110 Vivotek HFX 1400 Usb Joystick
    The GV-Joystick provides full control of the PTZ devices connected to the GV-System. It faciliates functions such as tilt, pan, or zoom to achieve precision surveillance. When combined with the GV-Keyboard, it empowers GV-System operations. HFX 1400 / 900002500G USB Joystick

    Supported Models: PZ7111/PZ7121, PZ7112/PZ7122, PZ7131/PZ7132, PZ7151/PZ7152, SD7151, SD7313/SD7323, SD8111/SD8121

       
     
    Joysticks
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please