Home > Shop Brands > GE Kalatel >

  Kalatel KTD127 Pan/Tilt Zoom Receiver

Kalatel KTD127 Pan/Tilt Zoom Receiver


Our Price : $302.98

Product Code: GEKKTD127

Call for availability

The KTD-127 is a PTZ (pan/tilt/zoom) receiver that can drive a 6 to 12 V motorized lens and a light-duty PT unit with 24 VAC motors that draw less than 1 amp

The KTD-127's internal circuit panel consists of a main relay board, a plug-in decoder card, and a removable terminal strip for cable connections. It is mounted in a
compact aluminum housing and features a snap-on cover. The KTD-127 can also be ordered with a weatherproof housing unit for outdoor applications.

The KTD-127 is controlled via twisted-pair cable from one or more remote Digiplex keypads. Local switches facilitate service by providing direct access to control
functions at the receiver site. Relays and ICs are socketed for easy removal and replacement.

Microprocessor-based circuitry enables a remote keypad or the receiver's DIP switch to be used to program the KTD-127's modes of operation. Programming options include lens voltage, lens polarity, and auto pan. The auto pan modes are 50 percent duty cycle, random scan, continuous pan, and disabled. All programmed data is stored in
nonvolatile memory.




Voltage: 24 VAC 50 to 60 Hz
Powe r : 7.0 VA (External equipment excluded)
Maximum power: 24 VA
Data Signal: RS422


Voltages Lens: 6 or 12 VDC,programmable
Pan/Tilt Drive: 24 VAC
Camera Power: 24 VAC
Relay Contact Rating: 3 amp @ 24 VAC


Function Controls: SPDT toggle switches
Site Select: Multi-position DIP switch
Auto Reverse Mode: Jumper selectable


Input Signal: Four-position terminal strip Power Input
Outputs: 14-position removable terminal strip


Zoom in, zoom out, focus near, focus far, iris open, iris close, pan right, pan left, tilt up, tilt down, auto pan (100 percent, 50 percent, and random)


Indoor Housing

Weight: 2.00 lb
Enclosure : 0.050 in. aluminum
Finish: Black anodize

Weatherproof Housing

Weight: 5.00 lb
Enclosure : Gray fiberglass. When fitted with watertight seal devices,
this enclosure meets NEMA 3, 4X, and 12 specifications.
  • Drives light-duty 24 VAC PT motors
  • Easily removable PC board
  • On-site control switches
  • Compact indoor and weatherproof housings
  • Solid-state lens circuitry, 6 to 12 V
  • Four auto pan modes
  • Compatible with most manufacturers' PT units

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > GE Kalatel

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please