You are here: Home > Access Control > Guest / Employee Management > Keri Access
We found 38 results matching your criteria.
Keri Access
Sort By:
Page of 4
Keri Systems ANT-241 Antenna Remote Wiring Keri Systems ANT-244 Omni-Directional Extended Range Antenna
2.4 GHz Remote Wiring Antenna
Separates antenna from transceiver for better line-of-site.
ANT-244

2.4 GHz Omni-Directional Extended Range Antenna

Keri Systems ANT-24Y Unidirectional Extended Range (Yagi) Keri Systems ANT-91 Antenna Remote Wiring
ANT-24Y

2.4 GHz Uni-Directional Extended Range Antenna (yagi)

915 MHz Remote Wiring Antenna
Separates antenna from transceiver for better line-of-site.
Keri Systems ANT-94 Omni-Directional Extended Range Antenna Keri Systems ANT-9Y Unidirectional Extended Range (Yagi)
ANT-94

915 MHz Omni-Directional Extended Range Antenna

ANT-9Y

915 MHz Uni-Directional Extended Range Antenna (yagi)

Keri Systems CU-500 Chip Upgrade Keri Systems DCR-2 Mounting Rails for IT Rack (pair).

KERI CU-500 Chip Upgrade

To upgrade PXL-500 firmware

DCR-2 Mounting Kit

Concentrator Rack Mounting kit for 19" IT Rack

Keri Systems Inc  KPS-11 POWER SUPPLY Keri Systems Inc.  NXT-4D  A 4-Door Access Controller 05350-001
Keri Systems Inc KPS-11 POWER SUPPLY The NXT-4D Xtreme 4 Door Controller is built for todays IT environments. With all Ethernet functionality built directly into the controller, Keris proprietary MAC address allows for reliable hardware discovery and true 1 button autoconfiguration.

Networking between NXT-4D controllers and/or its sister NXT-2D Xtreme 2 Door Controller also utilize peer to peer Ethernet standards. The NXT-4D is designed to be extremely intelligent with little reliance on network traffic for decision making allowing it to be extremely thrifty with any networks valuable bandwidth.

To expand the systems capabilities, up to four companion 4 x 4 Input/Output boards (NXT-4X4) can be added - one to each of the controllers RS-485 trunks (busses). Customers can choose between Keris new line of highly secure, 4-wire NXT Proximity Readers with reader supervision, and any reader with a standard Wiegand output or Keris MS Series Proximity Readers via the NXT-RM Reader Interface Module.

To manage the system, Doors NetXtreme software has much of the same look and feel as Keris acclaimed original DoorsTM software, but with the added functionality of Client/Server architecture.

Features

  • 4 Door Controller for Keris Doors NetXtreme product line
  • On-board TCP/IP - no network adapters required
  • Ethernet (TCP/IP) network architecture between controllers (true peer-to-peer) and to Host Server
  • Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5 Network
  • Embedded MAC Address for One button AutoConfiguration
  • Built-In Tamper Input
  • Standard 4 PIN Block and RJ Jack built-in for network connection
  • Re-assignable Inputs and Outputs
  • Flash Memory for easy firmware upgrades
  • Up to 256 Controllers (1024 doors) and 4096 auxiliary I/O points per network
  • 50,000 Cardholders, 10,000 Selectable Event Buffer per controller
  • Locking Metal Enclosure (optional without)
  • 96 Bit Encryption
  • Keri Systems Inc.  NXT-4DNE  A 4-Door Access Controller 05350-001 Keri Systems Inc.  NXTI50 ISO Proximity Card (w/o Magnetic Stripe) 50 PACK
    The NXT-4DNE Xtreme 4 Door Controller is built for todays IT environments. With all Ethernet functionality built directly into the controller, Keris proprietary MAC address allows for reliable hardware discovery and true 1 button autoconfiguration.

    Networking between NXT-4DNE controllers and/or its sister NXT-2D Xtreme 2 Door Controller also utilize peer to peer Ethernet standards. The NXT-4DNE is designed to be extremely intelligent with little reliance on network traffic for decision making allowing it to be extremely thrifty with any networks valuable bandwidth.

    To expand the systems capabilities, up to four companion 4 x 4 Input/Output boards (NXT-4X4) can be added - one to each of the controllers RS-485 trunks (busses). Customers can choose between Keris new line of highly secure, 4-wire NXT Proximity Readers with reader supervision, and any reader with a standard Wiegand output or Keris MS Series Proximity Readers via the NXT-RM Reader Interface Module.

    To manage the system, Doors NetXtreme software has much of the same look and feel as Keris acclaimed original DoorsTM software, but with the added functionality of Client/Server architecture.

    Features

  • 4 Door Controller for Keris Doors NetXtreme product line
  • On-board TCP/IP - no network adapters required
  • Ethernet (TCP/IP) network architecture between controllers (true peer-to-peer) and to Host Server
  • Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5 Network
  • Embedded MAC Address for One button AutoConfiguration
  • Built-In Tamper Input
  • Standard 4 PIN Block and RJ Jack built-in for network connection
  • Re-assignable Inputs and Outputs
  • Flash Memory for easy firmware upgrades
  • Up to 256 Controllers (1024 doors) and 4096 auxiliary I/O points per network
  • 50,000 Cardholders, 10,000 Selectable Event Buffer per controller
  • Locking Metal Enclosure (optional without)
  • 96 Bit Encryption
  • Keri Systems Inc. NXTI50 ISO Proximity Card (w/o Magnetic Stripe) 50 PACK
       
     
    Keri Access
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please