|
|
|
|
|
|
|
|
|
1:2 Component Video Distribution Amplifier
The VM-2C is a high-performance distribution amplifier for component Video (RGB/YUV) signals. It takes one input, provides correct buffering and isolation and distributes the signal to two identical outputs.
|
1:2 Multi-Format Video Distribution Amplifier with Stereo Audio
The VM-312 is a multi-format video distribution amplifier for composite, s-Video (Y/C), and component (HDTV) signals with one audio input for an unbalanced stereo audio signal. It takes one input of each video format and one audio input on a 3.5mm mini jack connector and distributes each signal type to 2 identical outputs.
|
|
|
|
|
|
|
|
|
|
|
|
1:10 Component Distribution Amplifier (RCAs)
The VM-100C is a high-performance distribution amplifier for component (RGB/YUV) video signals. It takes one input, provides correct buffering and isolation, and distributes the signal to 10 identical outputs on RCA connectors.
|
1:3 Component, S/PDIF & Stereo Audio Distribution Amplifier
The VM-30CA is a high-performance distribution amplifier for component video (YUV), S/PDIF and unbalanced stereo audio signals. It takes one input of each signal type, provides correct buffering and isolation, and distributes the signal to three identical outputs.
|
|
|
|
|
|
|
|
|
|
|
|
1:10 Component Distribution Amplifier (BNCs)
The Kramer VM-100CB is a high-performance distribution amplifier for component video signals. It takes one input, provides correct buffering and isolation, and distributes the signal to 10 identical outputs on BNC connectors.
|
1:2 CV, Y/C, Component & XGA Distribution Amplifier
The VP-72 is a seven input multi-format distribution amplifier for composite, s-Video, component (HDTV or SDTV), and computer graphics video signals with resolutions up to and exceeding UXGA. It was designed from user feedback to complement Kramer�s ProScale™ digital scaler/switcher line and includes seven 1:2 distribution amplifiers in one package: two composite, two s-Video (Y/C), one component, and two computer graphics video.
|
|
|
|
|
|
|
|
|
|
|
|
1:2 RGBS & Component Video Distribution Amplifier
The VM-1042 is a high-performance distribution amplifier for RGBS or component video signals. The unit has 4 channels of single BNC inputs each with 2 outputs that allow configuration as a four 1:2 composite video, two 1:2 s-Video (Y/C), or one 1:2 RGBS or component (YUV) video distribution amplifier.
|
1:5 Component, S/PDIF & Stereo Audio Distribution Amplifier
The VM-50CA is a high-performance distribution amplifier for component video (YUV), S/PDIF and unbalanced stereo audio signals. It takes one input of each signal type, provides correct buffering and isolation, and distributes the signal to five identical outputs.
|
|
|
|
|
|
|
|
|
|
|
|
1:10 Component Video, S/PDIF & (U) Stereo Audio Distribution Amplifier
The VM-100CA is a distribution amplifier for component video along with analog and digital audio signals. It takes one input of each signal type, provides correct buffering and isolation and distributes the signal to 10 identical outputs on RCA connectors.
|
1:5 Component Video Distribution Amplifier
The Kramer VM-1045 is a high-performance distribution amplifier for component video signals. It can be configured as a four 1:5 composite video, two 1:5 s-Video (Y/C) or one 1:5 component (RGB/S) distribution amplifier.
|
|
|
|
|
|
|
|
|
|
|
|
9x1:2 Multi-format Distribution Amplifier (CV, Y/C, YUV, RGBS)
The VM-92 is a high-performance multi-mode distribution amplifier for composite, s-Video (Y/C), component (YUV), and RGBS video signals. It can be configured as a 9x1:2 composite, 4x1:2 s-Video (Y/C), 3x1:2 component (YUV) or 2x1:2 RGBS DA.
|
1:54 Composite DA or 1:18 Component Distribution Amplifier
The VM-54 is a high-performance dual-mode distribution amplifier for composite, SDI, or component video signals. It can be configured as a 1:18 distribution amplifier for component (YUV) signals and provides controls to compensate for signal losses inherent in long cable runs.
|
|
|
