Supervised Carbon Monoxide Detector Transmitter
Model Number: DXS80 Product Number: SST00116
The DXS-80 Supervised Carbon Monoxide Detector Transmitter is a UL listed, single station, carbon monoxide alarm with a built-in supervised transmitter designed to be used with Linearís wireless DXS Format Security Systems, Personal Emergency Reporting Systems (PERS), and stand-alone receivers. The DXS-80 provides a warning to alert against both the acute and chronic effects of carbon monoxide (CO) poisoning.
When carbon monoxide is detected, the alarm sounds a loud local alarm. The built-in transmitter sends a digitally coded wireless signal to its companion receiver every 20 seconds until the air has cleared and the detector is restored.
The local alarm can be silenced once by pressing the test/reset button. The transmitter will continue to send an alarm signal every 20 seconds. After 7 minutes, the alarm will sound again if there is still an unsafe carbon monoxide concentration level. The reset function can be used only once for each alarm occurrence.
No field coding is required because the DXS-80 is factory set to a unique code; one of over a million possible codes.
The DXS-80 is powered by one 3-volt lithium battery. The battery is supplied and can power the unit for up to the six year life of the detector. If the battery voltage drops below a preset level the alarm will sound a low battery chirp every 45 seconds and a low battery signal will be sent to the receiver.
At about 6 years, the carbon monoxide detector element will reach the end of its serviceable life. The self-supervising detector will signal a permanent trouble condition, indicating time for replacement.
Features Electrochemical type detector Alarm, status, and low battery transmissions One 3-volt lithium battery supplied Two status indicators Built-in 85 dBA sounder UL listed DXS format RF frequency: 315 MHz 5.375" W x 5.375" H x 2" D