Home > Shop Brands > Linear > Wireless Security Solutions > Receivers > DXS Supervised Receivers >

 

Linear DXSR-1504 Supervised 4-Channel Receiver - 315 MHz



Linear DXSR-1504 Supervised 4-Channel Receiver - 315 MHz


 

Our Price : $57.50

UPC Code: 93863104398

Product Code: 28024

Qty:

Description
 
LN-DXSR1504 / Product Number: SSR00070

The Model DXSR-1504 Supervised 4-Channel Receiver is a four channel supervised digital receiver with solid state outputs designed for use with Linear's DX and DXS Format transmitters. This receiver can be used in a variety of security and remote control applications. When the receiver detects a signal from a transmitter programmed into its memory, the appropriate channel output activates. The channel outputs have three optional configurations; momentary, toggle on/off, and latch until restored. Status and low battery outputs are for supervisory indications. Cutting jumpers select which channels require supervisory status reports from transmitters.

The Model DXSR-1504 incorporates a dual high-sensitivity superheterodyne diversity receiver with two whip antennas. This type of receiver provides superior performance by preventing loss of signal due to multi-path interference.

In a typical installation, the receiver is connected to an alarm control panel, door strike, camera, high current relay or some other devices. Transmitters are used to activate or control the devices. The receiver should be mounted indoors or inside a weather resistant non-metallic housing for outdoor use.

The digital DX/DXS code format features over a million possible codes. The transmitters are precoded at the factory to unique codes, so no field coding is required. For versatility, any transmitter can be programmed into any receiver channel. Receivers must be programmed to recognize the transmitter's code before system testing and operation. Up to 32 transmitters can be programmed into the receiver. Each button on multi-button portable transmitters send a unique code, and are programmed as separate transmitters.

The CHANNEL display shows the channels activated and the presence of radio activity. Individual indicators for ALARM, STATUS, and LOW BATT show the supervisory status of each receiver channel. All outputs can be configured for normally open or normally closed.

Features

  • Dual diversity superheterodyne receivers
  • Compatible with DX and DXS transmitters
  • Measured line-of-sight range of 1,500 Feet
  • Quick-learn programming
  • Selectable supervision
  • Individual outputs per RF channel or alarm, low battery, and status trouble reports
  • 7-Segment channel display (Decimal Point Indicates RF Activity)
  • LED Indication for alarm, low battery, and status
  • Solid state outputs
  • 100 mA maximum output rating
  • Selectable outputs per channel: momentary, latch, toggle
  • Operating voltage: 10.2 to 14.4 VDC or 12 to 16 VAC
  • Current consumption: 30 mA standby, 120 mA operating @ 12 VDC
  • 7.25" W x 5.0" H x 1.0" D (without antennas)

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Linear > Wireless Security Solutions > Receivers > DXS Supervised Receivers
Shop Brands > Linear > Wireless Security Solutions > Receivers
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please