You are here: Home > Access Control > Telephone Entry > Linear
We found 11 results matching your criteria.
Linear Telephone Entry The enclosure can be either flush or surface mounted and is suitable for indoor or outdoor applications.
Sort By:
Page of 1
Linear AE-1 Telephone Entry System - ALSO LISTED AS #ACP00718 Linear AE-100 Commercial Telephone Entry System - 125 users
Product Number: ACP00718

Linearís Telephone Entry combines telephone entry with full-featured access control, including keyless entry and panic functions. It is extremely easy to operate, making it ideal for a wide range of applications, including apartments, condominiums, dormitories, office buildings, and gated communities. It offers security, convenience, and handicapped access.

As a telephone entry system, it provides full duplex telephone communications through hands-free operation, and controls four openings via touch-tone telephone. It is supplied in a rugged, stainless steel, surface mount housing that will withstand years in the toughest environments.

Remarkable ease of operation is made possible by a highly visible keypad and large display, which presents visitors with a scrolling directory of up to 3,500 occupants (residents or employees) by name and code. When a code is entered on the keypad, a two-way voice link is established so the occupant can identify the visitor and grant access. Occupants gain entry using a special transmitter by keyless entry.

AE-1 (64): 500 User / 500 Event Capacity
AE-1 (128): 1,000 User / 5,000 Event Capacity
AE-1 (256): 2,500 User / 10,000 Event Capacity

Features

  • Ideal entry system for apartments, condos, gated communities, dormitories, offices and other commercial sites
  • Extensive capacity - up to 3,500 users
  • Controls up to four portals via touch-tone telephone and keypad entry
  • RS485 capability for networking up to 32 doors
  • Full duplex telephone communications
  • Built-in radio for keyless entry - wireless activation from up to 250 feet away
  • Large LCD display, 2 lines by 16 characters
  • Field programmable directory, talk time, and display message
  • Selectable extended talk time
  • Accepts inputs from remote keypads, Wiegand cards, and proximity devices
  • Programming via built-in keypad or PC software
  • Optional sunlight visor and stainless steel post mounting plate
  • Can be networked - up to 64 units
  • Windows based software for installation management
The Model AE-100 Telephone Entry System is designed for smaller commercial telephone entry installations. The system supports 125 directory or personal entry codes, eliminating the need for ongoing incremental memory upgrades to add tenants. This generous "as standard" capacity makes the AE-100 very attractive, especially since it has a features package typical of much larger systems. The enclosure can be either flush or surface mounted and is suitable for indoor or outdoor applications.

The Model AE-100 Commercial Telephone Entry System is designed for use as a primary access control device for apartments, condominiums, and offices with up to 125 residents.

The system can be used in a lobby or outside. Surface, recessed, and pedestal mounting options are supported. The system utilizes hands-free, full duplex telephone communications between visitors and residents for granting access.

Housed in a locked, rugged stainless steel faced enclosure, the AE-100 features a lighted 12-key telephone style keypad and four operation buttons all with bright, easy-to-see graphics. The backlit two-line directory LCD display scrolls a programmable welcome message and shows the directory Names and Directory Codes.

The system contains a built-in microphone, tamper resistant speaker, and a TTY connector for the hearing impaired. The heavy duty access relay can control electric door strikes, magnetic locks, door & gate operators, or barrier gates.

Multi-lingual display programming prompts and voice help is available with a choice of English, Spanish, French-Canadian, or Portuguese language selection for the system. The system can be programmed locally using the keypad, or remotely with a touch tone telephone.

Up to four AE-100 units can be connected to the same dedicated telephone line to form a simple network. Connecting multiple units allows transferring programming data (either the directory entries only or the entire memoryís contents) from the "master" unit to the other sub-units.

Optional features that the AE-100 supports are provisions for postal lock and color CCTV camera installation (Model CCM-1).

The AE-100 is powered from a 16 VAC plug-in transformer and supports an internal rechargeable 1.2 amp/hour backup battery (not included). The battery charging circuit will support an external backup battery with up to 7 amp/hour capacity.

Features

  • Applications include small apartment buildings, condominiums, or gated communities
  • Many installation choices: surface, recessed, gooseneck
  • Stainless steel front panel
  • Telephone style keypad with lighting
  • Accepts a total of 125 directory listings or stand-alone entry codes
  • TTY jack for connection to text communication devices for the hearing impaired
  • Simple network capability with up to four units
  • Installer friendly with two programming methods available
  • Two-line-16-character LCD display
  • Removable terminal blocks
  • Programmable through the unit's keypad or over the telephone
  • Form "C" access relay rated at 10 amps AC and 7 amps DC @ 30 volts
  • Load shed circuitry protects backup battery
  • Supports optional color CCTV camera and postal lock
  • Optional trim-ring (Model TR-100) for recessed mounting
  • 9.75" W x 11.75" H x 3.5" D
  • Linear AE-1000 Commercial Telephone Entry System with Access Control Linear AE-2 Telephone Entry System - vacuum fluorescent display
    Product Number: ACP00898

    The Model AE-1000 Commercial Telephone Entry System with Access Control is designed for use as a primary access control device for gated communities, parking garages, office buildings, apartments, dormitories, hotels/motels, commercial buildings and recreational facilities.

    Housed in a locked, rugged stainless steel faced enclosure, the AE-1000 features a side-lit 12-key telephone style keypad with bright, easy-to-read graphics, a backlit two-line directory display with programmable welcome message, a built-in microphone, speaker, and provision for an optional color CCTV camera. The cabinet is monitored with a magnetic tamper switch.

    The four relay output channels can be programmed to control electric door strikes, magnetic locks, door & gate operators, or barrier gates.

    The system utilizes hands-free, full duplex telephone communications between visitors and residents for granting access. Complete access control event logging, access time restriction, access location restriction, and administration functions are also available to manage the installation.

    The AE-1000 is network ready. Multiple units can be interconnected on a 3-wire RS-485 network.

    Two Wiegand inputs are available for connection of 26, 30, or 31bit Wiegand devices (card readers, etc.). Three sets of PBUS inputs are available for connection to Linearís line of remote accessories.

    Installation and programming are made easy by Linearís AccessBase2000 software.

    Features

    • Full control of 4 doors; each supporting request to exit and door status monitoring
    • Housed in a locked, rugged stainless steel face enclosure
    • Sidelit 12-key telephone style keypad
    • Backlit two-line directory display with programmable display messages
    • Built-in microphone and speaker
    • Built-in RF receiver
    • Many installation choices: surface, recessed, gooseneck
    • Programmable directory code length and talk time; extended talk time allowed per cardholder
    • 10,000 cardholders
    • 10,000 directory codes - each capable of dialing up to 12 digits
    • 46,500 block enrolled cards; 20,000 individual cards
    • 46,500 block enrolled transmitters; 20,000 individual transmitters
    • 20,000 entry codes.20,000 event transaction log
    • Direct input for 2 card readers; add AM-CRI's for more
    • Local or remote programming using a PC and AccessBase2000 at 33.6 Kbps
    • 32 security levels, 32 time zones, 32 door schedules, and 24 holiday schedules
    • Relay auto lock/unlock schedules
    • Automatic door relock when door sense input is used
    • Extensive ESD and lightning protection of all inputs and outputs
    • Cabinet tamper switch included; tamper events are tracked in the event log
    • All data memory is non-volatile FLASH with data retention in excess of 10 years
    • OPTIONAL EQUIPMENT: TR-1000 (ACP00909): trim ring for flush/recess mounting, CCM-1 (ACP00904): color camera receives power from control board, CPDM-1 (AAE00436): digital modulator combines video output of camera with CATV source to allow tenants to view on their TVs who is at the AE-1000
    • RF frequency: 318 MHz
    • 13" W x 16.75" H x 3.5" D
    Product Number: ACP00733

    Linearís Telephone Entry combines telephone entry with full-featured access control, including keyless entry and panic functions. It is extremely easy to operate, making it ideal for a wide range of applications, including apartments, condominiums, dormitories, office buildings, and gated communities. It offers security, convenience, and handicapped access.

    As a telephone entry system, it provides full duplex telephone communications through hands-free operation, and controls four openings via touch-tone telephone. It is supplied in a rugged, stainless steel, surface mount housing that will withstand years in the toughest environments.

    Remarkable ease of operation is made possible by a highly visible keypad and large display, which presents visitors with a scrolling directory of up to 3,500 occupants (residents or employees) by name and code. When a code is entered on the keypad, a two-way voice link is established so the occupant can identify the visitor and grant access. Occupants gain entry using a special transmitter by keyless entry.

    Numerous programming options allow the installer to customize Telephone Entry for virtually any application. System choices include selection of a one-to-four digit directory code, 40 different display messages, talk time duration, and extended talk time for select individuals.

    AE-2 (64): 500 User / 500 Event Capacity
    AE-2 (128): 1,000 User / 5,000 Event Capacity
    AE-2 (256): 2,500 User / 10,000 Event Capacity

    Features
    • Ideal for apartments, condos, gated communities, dormitories, offices and other commercial sites
    • Extensive capacity - up to 3,500 users
    • Controls up to four portals via touch-tone telephone and keypad entry
    • RS485 capability for networking up to 32 doors
    • Built-in radio for keyless entry - wireless activation from up to 250 feet away field
    • Programmable directory, talk time, and display message
    • Selectable extended talk time
    • Accepts inputs from remote keypads, Wiegand cards, and proximity devices
    • Programming via built-in keypad or PC software
    • Large,vacuum fluorescent display, 2 lines by 20 characters
    • Optional sunlight visor and stainless steel post mounting plate
    • Can be networked - up to 64 units
    • Windows based software for installation management
    Linear AE-500 Commercial Telephone Entry System - 250 users Linear AE1000Plus Commercial Telephone Entry System with Access Control ( ACP00951 )
    Product Number: ACP00899

    The Model AE-500 Commercial Telephone Entry System is designed for use as a primary access control device for gated communities, parking garages, office buildings, apartments, dormitories, hotels/motels, commercial buildings and recreational facilities with up to 250 residents or users.

    Housed in a locked, rugged stainless steel faced enclosure, the AE-500 features a side-lit 12-key telephone style keypad with bright, easy-to-read graphics, a backlit two-line directory display with a programmable welcome message, a built-in microphone, and speaker.

    The two relay output channels can be programmed to control electric door strikes, magnetic locks, door & gate operators, or barrier gates.

    The system utilizes hands-free, full duplex telephone communications between visitors and residents for granting access.

    The system can be programmed locally using the keypad, remotely with a touch tone telephone, or remotely using a computer equipped with a modem and a web browser.

    Features
    • Economically priced
    • Stainless steel front panel
    • Telephone style keypad with surround lighting
    • Up to 250 user capacity
    • Accepts up to 500 entry codes
    • Built-in RF receiver
    • Two-line-16-character LCD display
    • Many installation choices: surface, recessed, gooseneck
    • Built-in modem for remote programming
    • Multiple programming methods: from keypad, from touchtone telephone, from web browser
    • Two configurable output relays
    • Applications include apartment buildings, condominiums, dorms, hospitals
    • RF frequency: 318 MHz
    • 10.75" W x 12.75" H x 3.5" D
    Product Number: ACP00951

    The Model AE1000Plus Commercial Telephone Entry System with Access Control is designed for use as a primary access control device for gated communities, parking garages, office buildings, apartments, dormitories, hotels/motels, commercial buildings and recreational facilities.

    Housed in a locked, rugged stainless steel faced enclosure, the AE1000Plus features a side-lit 12-key telephone style keypad with bright, easy-to-read graphics, a backlit two-line directory display with programmable welcome message, a built-in microphone, speaker, and provision for an optional Model CCM-1 color CCTV camera. The cabinet is monitored with a magnetic tamper switch.

    The four relay output channels can be programmed to control electric door strikes, magnetic locks, door & gate operators, or barrier gates.

    The system utilizes hands-free, full duplex telephone communications between visitors and residents for granting access. Complete access control event logging, access time restriction, access location restriction, and administration functions are also available to manage the installation.

    For easy programming, the AE1000Plus contains Linear's built-in browser-based AXNET software. The system can be programmed and maintained from any computer world-wide, without using dedicated computer software. The AE1000Plus is also compatible with Linearís powerful AccessBase2000 dedicated access control PC software.

    The AE1000Plus is network ready. AE1000Plus units can be interconnected with Linearís AM3Plus and AE2000Plus Telephone Entry Systems through a 3-wire RS-485 or modem network. The AE1000Plus can be used in networks with the legacy AM-3, AE-1000, and AE-2000 Telephone Entry Systems in installations programmed with AccessBase2000 software only.

    Two Wiegand inputs are available for connection of 26, 30, or 31bit Wiegand devices (card readers, etc.). Three sets of PBUS inputs are available for connection to Linearís line of remote accessories.
    Capabilities with AXNET Programming
    Programming using any PC and Internet browser software
    Up to 2,000 cardholders
    Up to 24 card blocks with up to 1,600 cards each (38,400 total)
    Up to 2,000 individually enrolled cards
    Up to 24 transmitter blocks with up to 1,600 transmitters each (38,400 total)
    Up to 2,000 individually enrolled transmitters
    Up to 2,000 key codes
    Up to 2,000 telephone directory codes
    2,500 event log entries per unit
    Up to 8 access time zones
    Up to 4 PBUS devices per unit

    Capabilities with AccessBase2000 Programming
    Programming using a dedicated PC and AccessBase2000 software
    Up to 10,000 cardholders grouped in sets
    Up to 24 card blocks with up to 1,900 cards each (45,600 total)
    Up to 20,000 individually enrolled cards
    Up to 24 transmitter blocks with up to 1,900 transmitters each (45,600 total)
    Up to 20,000 individually enrolled transmitters
    Up to 20,000 entry codes for cardholders
    Up to 10,000 telephone directory codes for cardholders
    10,000 event log entries per unit
    Up to 31 access time zones
    Up to 6 PBUS devices per unit

    Features

  • Full control of 4 doors; each supporting request to exit and door status monitoring
  • Housed in a locked, rugged stainless steel face enclosure
  • Side-lit 12-key telephone style keypad
  • Back-lit two-line directory display with programmable display messages
  • Built-in microphone and speaker
  • Built-in RF receiver
  • Many installation choices: surface, gooseneck, and recessed (with TR-1000 trim ring)
  • Programmable directory code length and talk time; extended talk time allowed per cardholder
  • Direct input for 2 card readers; add AM-CRI's for more
  • Local or remote programming using a PC
  • Relay auto lock/unlock schedules
  • Automatic door relock when door sense input is used
  • Extensive ESD and lightning protection of all inputs and outputs
  • Cabinet tamper switch included; tamper events are tracked in the event log
  • All data memory is non-volatile FLASH with data retention in excess of 10 years
  • RF frequency: 318 MHz
  • 13" W x 16.75" H x 3.5" D
  • Linear AE2000Plus Commercial Telephone Entry System with Access Control ( ACP00952 ) Linear RE-1N Residential Telephone Entry System (Nickel)
    AE2000Plus Commercial Telephone Entry System with Access Control

    Product Number: ACP00952

    The Model AE2000Plus Commercial Telephone Entry System with Access Control is designed for use as a primary access control device for gated communities, parking garages, office buildings, apartments, dormitories, hotels/motels, commercial buildings and recreational facilities.

    Housed in a locked, rugged stainless steel faced enclosure, the AE2000Plus features a lighted keypad with bright, easy-to-read graphics, a large backlit display with programmable welcome message, a built-in microphone, speaker, and provision for an optional Model CCM-1 color CCTV camera. The cabinet is monitored with a magnetic tamper switch.

    The four relay output channels can be programmed to control electric door strikes, magnetic locks, door & gate operators, or barrier gates.

    The system utilizes hands-free, full duplex telephone communications between visitors and residents for granting access. Complete access control event logging, access time restriction, access location restriction, and administration functions are also available to manage the installation.

    For easy programming, the AE2000Plus contains Linear's built-in browser-based AXNET software. The system can be programmed and maintained from any computer world-wide, without using dedicated computer software. The AE2000Plus is also compatible with Linearís powerful AccessBase2000 dedicated access control PC software.

    The AE2000Plus is network ready. AE2000Plus units can be interconnected with Linearís AM3Plus and AE1000Plus Telephone Entry Systems through a 3-wire RS-485 or modem network. The AE2000Plus can be used in networks with the legacy AM-3, AE-1000, and AE-2000 Telephone Entry Systems in installations programmed with AccessBase2000 software only.

    Two Wiegand inputs are available for connection of 26, 30, or 31-bit Wiegand devices (card readers, etc.). Three sets of PBUS inputs are available for connection to Linearís line of remote accessories.
    Capabilities with AXNET Programming
    Programming using any PC and Internet browser software
    Up to 2,000 cardholders
    Up to 24 card blocks with up to 1,600 cards each (38,400 total)
    Up to 2,000 individually enrolled cards
    Up to 24 transmitter blocks with up to 1,600 transmitters each (38,400 total)
    Up to 2,000 individually enrolled transmitters
    Up to 2,000 key codes
    Up to 2,000 telephone directory codes
    2,500 event log entries per unit
    Up to 8 access time zones
    Up to 4 PBUS devices per unit

    Capabilities with AccessBase2000 Programming
    Programming using a dedicated PC and AccessBase2000 software
    Up to 10,000 cardholders grouped in sets
    Up to 24 card blocks with up to 1,900 cards each (45,600 total)
    Up to 20,000 individually enrolled cards
    Up to 24 transmitter blocks with up to 1,900 transmitters each (45,600 total)
    Up to 20,000 individually enrolled transmitters
    Up to 20,000 entry codes for cardholders
    Up to 10,000 telephone directory codes for cardholders
    10,000 event log entries per unit
    Up to 31 access time zones
    Up to 6 PBUS devices per unit

    Features

  • Full control of 4 doors; each supporting request to exit and door status monitoring
  • Housed in a locked, rugged stainless steel face enclosure
  • Articulated, double-locking, stainless steel front panel
  • Temperature compensated, back-lit VGA resolution LCD display
  • Back-lit keys
  • Built-in microphone and speaker
  • Built-in RF receiver
  • Many installation choices: surface, gooseneck, and recessed (with TR-2000 trim ring)
  • Programmable directory code length and talk time; extended talk time allowed per cardholder
  • Direct input for 2 card readers; add AM-CRI's for more
  • Local or remote programming using a PC
  • Relay auto lock/unlock schedules
  • Automatic door relock when door sense input is used
  • Extensive ESD and lightning protection of all inputs and outputs
  • Cabinet tamper switch included; tamper events are tracked in the event log
  • All data memory is non-volatile FLASH with data retention in excess of 10 years
  • RF frequency: 318 MHz
  • 15.25" W x 18.75" H x 4" D
  • Product Number: ACP00892

    The Model RE-1N Residential Telephone Entry System is designed for residential or light commercial access control applications. The speakerphone, keypad, radio receiver, and optional video camera are housed in a rugged enclosure that can be mounted to a pedestal or bolted directly to a wall. The diecast keypad keys have bright, easy-to-read graphics and are lit with an overhead light. The two operation buttons; CALL and HELP, are machined for heavy-duty reliability.

    Arriving visitors will approach the unit and place a call to the residence by pressing the CALL button. The RE-1N will acquire the residenceís local telephone line and generate distinctive rings to the house telephones. The resident, knowing that the distinctive ring is originating from the access area, can answer any house telephone and converse with the visitor. If the resident decides to grant access to the visitor, they can activate either output relay in the RE-1N by pressing a key on the telephoneís keypad. If the resident decides not to grant access, hanging up or pressing a key will disconnect the visitorís call.

    If the resident is using the telephone at the time a visitor calls, the RE-1N will sound beeps on the telephone line to announce that a visitor is calling. The resident can press a key on the telephone to place the outside caller on hold and communicate with the visitor. After granting or denying access to the visitor, the outside caller will be re-connected to the resident.

    Programmable call forwarding allows the RE-1N to dial any selected telephone number when a visitor presses the CALL button. For example, with call forwarding enabled, the RE-1N could dial a cell phone to contact the resident while outside or away from the residence. The resident will be able to communicate with the visitor and grant or deny access from the remote telephone.

    For installations where multiple residences exist inside the same controlled opening (such as a guest house or granny flat) three alternate calling numbers can be programmed. The alternate numbers can be called by entering a short code at the keypad.

    The resident can issue control commands from the local telephones without a call from a visitor. By dialing a specific series of digits, the resident can control either of the two relays. The resident an also initiate voice communications with the entry system.

    Up to 100 entry codes, from 1 to 6 digits in length, can be programmed. Each entry code can activate either, or both, of the relay outputs. Linearís Model AM-KP keypad can be used as a secondary remote keypad for the RE-1N.

    Up to four sets of block coded MegaCodeģ transmitters (up to 60 transmitters total) can be used to gain access through the RE-1Nís built-in radio receiver. Each transmitter can be individually suspended or re-activated. Four facility codes can be programmed to identify each block of transmitters. Programming of individual (non-block coded) transmitters is not supported by the RE-1N.

    The RE-1N contains an internal clock and calendar. Seven programmable time zones allow setting time periods to schedule system functions. Each time zone can be active or inactive on certain days. Keypad entry codes, wireless transmitters, automatic access control, call forwarding, and the Do Not Disturb feature can each be set to only be active during a specific time zone period. Up to ten holiday days can be programmed. Each of the seven time zones can be set to be active or inactive during a holiday.

    The SENSE/INHIBIT input can be used two ways. If programmed for door sense, a switch on the door detects forced entry or door ajar situations. If programmed for inhibit, the input can be wired to a service switch or automatic timer that will disable the Relay #1 when required.

    The OPEN REQUEST input can be wired to an exit loop detector or exit photo beam to allow automatic exit activation. An emergency access keyswitch can be mounted in the RE-1 case to allow keyed entry for authorized personnel.

    The anti-passback feature allows the option of preventing the use of the same code or the same transmitter again before the programmed time elapses. The keypad lockout feature discourages tampering by disabling the keypad for three minutes after a programmable number of incorrect entry codes has been entered at the keypad.

    An access log of up to 450 events is stored in the unitís memory. System activity is logged as it occurs with the date and time of the event. The access log data can be retrieved locally or remotely with a computer through the RE-1Nís built-in modem.

    The systemís built-in programming software can be accessed on-site or off-site using a computer with any Internet browser. The softwareís graphic display of each of the programming step makes programming easy. Without a computer, the RE-1N can be programmed with its main keypad, from any local telephone connected to the same line, or by calling from any remote telephone.

    The EEPROM memory retains all entry codes, transmitter information, and programming, even without power. Linearís Model MGT safety edge transmitter is compatible with the RE-1N This MGT detects and transmits obstacle events to the RE-1N receiver. Obstacle signals from an MGT transmitter will activate Relay #2. Relay #2 can be programmed for alarm shunt to bypass an alarm loop during entry, or alarm trigger to cause an alarm during forced entry. Five other activation options are available for Relay #2. A built-in voice synthesizer sounds voice prompts through the speaker, local and remote telephones.

    Features

    • Dramatic Contemporary Styling
    • Cast Housing; Nickel finish
    • Downlighting
    • Voice Prompts, User Friendly, Owner Friendly
    • Two Programmable Outputs Control Two Openings
    • Obstacle Reverse, Alarm Shunt
    • Optional Low Light CCTV Camera Kit (Model RE-BWC)
    • Provisions for Knox Box
    • Simple to Program and Maintain through On Board Keypad, Touchtone Telephone, or Computer with Modem
    • 500 Event Memory Log
    • Supports 100 Entry Codes
    • Supports 100 Block-Coded Transmitters
    • Applications include Single Residence, Commercial Sites, Employee Parking
    • Built-in superheterodyne radio receiver
    • MegaCode format
    • Operating Frequency: 318 MHz
    • Backup battery ready
    • 6.45" W x 10.81" H x 3.74" D
    Linear RE-1SS Residential Telephone Entry System (Stainless Steel) Linear RE-2N Residential Telephone Entry System (Nickel)
    Product Number: ACP00896

    The Model RE-1SS Residential Telephone Entry System is designed for residential or light commercial access control applications. The speakerphone, keypad, radio receiver, and optional video camera are housed in a rugged enclosure that can be mounted to a pedestal or bolted directly to a wall. The diecast keypad keys have bright, easy-to-read graphics and are lit with an overhead light. The two operation buttons; CALL and HELP, are machined for heavy-duty reliability.

    Arriving visitors will approach the unit and place a call to the residence by pressing the CALL button. The RE-1SS will acquire the residenceís local telephone line and generate distinctive rings to the house telephones. The resident, knowing that the distinctive ring is originating from the access area, can answer any house telephone and converse with the visitor. If the resident decides to grant access to the visitor, they can activate either output relay in the RE-1SS by pressing a key on the telephoneís keypad. If the resident decides not to grant access, hanging up or pressing a key will disconnect the visitorís call.

    If the resident is using the telephone at the time a visitor calls, the RE-1SS will sound beeps on the telephone line to announce that a visitor is calling. The resident can press a key on the telephone to place the outside caller on hold and communicate with the visitor. After granting or denying access to the visitor, the outside caller will be re-connected to the resident.

    Programmable call forwarding allows the RE-1SS to dial any selected telephone number when a visitor presses the CALL button. For example, with call forwarding enabled, the RE-1SS could dial a cell phone to contact the resident while outside or away from the residence. The resident will be able to communicate with the visitor and grant or deny access from the remote telephone.

    For installations where multiple residences exist inside the same controlled opening (such as a guest house or granny flat) three alternate calling numbers can be programmed. The alternate numbers can be called by entering a short code at the keypad.

    The resident can issue control commands from the local telephones without a call from a visitor. By dialing a specific series of digits, the resident can control either of the two relays. The resident an also initiate voice communications with the entry system.

    Up to 100 entry codes, from 1 to 6 digits in length, can be programmed. Each entry code can activate either, or both, of the relay outputs. Linearís Model AM-KP keypad can be used as a secondary remote keypad for the RE-1SS.

    Up to four sets of block coded MegaCodeģ transmitters (up to 60 transmitters total) can be used to gain access through the RE-1SSís built-in radio receiver. Each transmitter can be individually suspended or re-activated. Four facility codes can be programmed to identify each block of transmitters. Programming of individual (non-block coded) transmitters is not supported by the RE-1SS.

    The RE-1SS contains an internal clock and calendar. Seven programmable time zones allow setting time periods to schedule system functions. Each time zone can be active or inactive on certain days. Keypad entry codes, wireless transmitters, automatic access control, call forwarding, and the Do Not Disturb feature can each be set to only be active during a specific time zone period. Up to ten holiday days can be programmed. Each of the seven time zones can be set to be active or inactive during a holiday.

    The SENSE/INHIBIT input can be used two ways. If programmed for door sense, a switch on the door detects forced entry or door ajar situations. If programmed for inhibit, the input can be wired to a service switch or automatic timer that will disable the Relay #1 when required.

    The OPEN REQUEST input can be wired to an exit loop detector or exit photo beam to allow automatic exit activation. An emergency access keyswitch can be mounted in the RE-1SS case to allow keyed entry for authorized personnel.

    The anti-passback feature allows the option of preventing the use of the same code or the same transmitter again before the programmed time elapses. The keypad lockout feature discourages tampering by disabling the keypad for three minutes after a programmable number of incorrect entry codes has been entered at the keypad.

    An access log of up to 450 events is stored in the unitís memory. System activity is logged as it occurs with the date and time of the event. The access log data can be retrieved locally or remotely with a computer through the RE-1SSís built-in modem.

    The systemís built-in programming software can be accessed on-site or off-site using a computer with any Internet browser. The softwareís graphic display of each of the programming step makes programming easy. Without a computer, the RE-1SS can be programmed with its main keypad, from any local telephone connected to the same line, or by calling from any remote telephone.

    The EEPROM memory retains all entry codes, transmitter information, and programming, even without power. Linearís Model MGT safety edge transmitter is compatible with the RE-1SS This MGT detects and transmits obstacle events to the RE-1SS receiver. Obstacle signals from an MGT transmitter will activate Relay #2. Relay #2 can be programmed for alarm shunt to bypass an alarm loop during entry, or alarm trigger to cause an alarm during forced entry. Five other activation options are available for Relay #2. A built-in voice synthesizer sounds voice prompts through the speaker, local and remote telephones.

    Features
    • Dramatic Contemporary Styling
    • Cast Housing; Stainless steel finish
    • Downlighting
    • Voice Prompts, User Friendly, Owner Friendly
    • Two Programmable Outputs Control Two Openings
    • Obstacle Reverse, Alarm Shunt
    • Optional Low Light CCTV Camera Kit (Model RE-BWC)
    • Provisions for Knox Box
    • Simple to Program and Maintain through On Board Keypad, Touchtone Telephone, or Computer with Modem
    • 500 Event Memory Log
    • Supports 100 Entry Codes
    • Supports 100 Block-Coded Transmitters
    • Applications Include Single Residence, Commercial Sites, Employee Parking
    • Built-in superheterodyne radio receiver
    • MegaCode format
    • Operating Frequency: 318 MHz
    • Backup battery ready
    • 6.45" W x 10.81" H x 3.74" D
    Product Number: ACP00910

    The Model RE-2N Residential Telephone Entry System is designed for residential or light commercial access control applications. The speakerphone, keypad, radio receiver, and optional color video camera are housed in a rugged enclosure that can be mounted to a pedestal, bolted directly to a wall, or mounted recessed in a wall with the optional trim ring. The die-cast keypad keys have bright, easy-to-read graphics and are lit with overhead lights. The two operation buttons; CALL and HELP, are machined for heavy-duty reliability.

    Operation

    Arriving visitors will approach the unit and place a call to the residence by pressing the CALL button. The RE-2N will acquire the residenceís local telephone line and generate distinctive rings to the house telephones. The resident, knowing that the distinctive ring is originating from the access area, can answer any house telephone and converse with the visitor. If the resident decides to grant access to the visitor, they can activate either output relay in the RE-2N by pressing a key on the telephoneís keypad. If the resident decides not to grant access, hanging up or pressing a key will disconnect the visitorís call.

    Call Waiting:

    If the resident is using the telephone at the time a visitor calls, the RE-2N will sound beeps on the telephone line to announce that a visitor is calling. The resident can press a key on the telephone to place the outside caller on hold and communicate with the visitor. After granting or denying access to the visitor, the outside caller will be re-connected to the resident.

    Call Forwarding:

    Programmable call forwarding allows the RE-2N to dial any selected telephone number when a visitor presses the CALL button. For example, with call forwarding enabled, the RE-2N could dial a cell phone to contact the resident while outside or away from the residence. The resident will be able to communicate with the visitor and grant or deny access from the remote telephone.

    Alternate Numbers:

    For installations where multiple residences exist inside the same controlled opening (such as a guest house or granny flat) three alternate calling numbers can be programmed. The alternate numbers can be called by entering a short code at the keypad.

    Local Control:

    The resident can issue control commands from the local telephones without a call from a visitor. By dialing a specific series of digits, the resident can control either of the two relays. The resident an also initiate voice communications with the entry system.

    Access Methods:

    Up to 100 entry codes, from 1 to 6 digits in length, can be programmed. Each entry code can activate either, or both, of the relay outputs. Linearís Model AM-KP keypad can be used as a secondary remote keypad for the RE-2N.

    Up to 24 sets of block coded MegaCodeģ transmitters (up to 100 transmitters total) can be used to gain access through the RE-2Nís built-in radio receiver. Each transmitter can be individually suspended or re-activated. One facility codes can be programmed to identify each block of transmitters. Programming of individual (non-block coded) transmitters is limited to 24 transmitters by entering one transmitter per block.

    System Features

    Time Zones:

    The RE-2N contains an internal clock and calendar. Seven Programmable "time zones" allow setting time periods to schedule system functions. Each time zone can be active or inactive on certain days. Keypad entry codes, wireless transmitters, automatic access control, call forwarding, and the "Do Not Disturb" feature can each be set to only be active during a specific time zone period. Up to ten "holiday" days can be programmed. Each of the seven time zones can be set to be active or inactive during a holiday.

    Portal Supervision:

    The SENSE/INHIBIT input can be used two ways. If programmed for "door sense", a switch on the door detects forced entry or door ajar situations. If programmed for "inhibit", the input can be wired to a "service" switch or automatic timer that will disable the Relay #1 when required.

    Hardwired Activation:

    The OPEN REQUEST input can be wired to an exit loop detector or exit photo beam to allow automatic exit activation. An emergency access keyswitch can be mounted in the RE-2N case to allow keyed entry for authorized personnel.

    Access Security:

    The "anti-passback" feature allows the option of preventing the use of the same code or the same transmitter again before the programmed time elapses. The "keypad lockout" feature discourages tampering by disabling the keypad for three minutes after a programmable number of incorrect entry codes has been entered at the keypad.

    Event Log:

    An access log of up to 450 events is stored in the unitís memory. System activity is logged as it occurs with the date and time of the event. The access log data can be retrieved locally or remotely with a computer through the RE-2Nís built-in modem.

    Local & Remote Programming:

    The systemís built-in programming software can be accessed on-site or off-site using a computer with any Internet browser. The softwareís graphic display of each of the programming step makes programming easy. Without a computer, the RE-2N can be programmed with its main keypad, from any local telephone connected to the same line, or by calling from any remote telephone.

    The EEPROM memory retains all entry codes, transmitter information, and programming, even without power.

    Obstacle Detection:

    Linearís Model MGT safety edge transmitter is compatible with the RE-2N. This MGT detects and transmits obstacle events to the RE-2N receiver. Obstacle signals from an MGT transmitter will activate Relay #2.

    Alarm Interface:

    Relay #2 can be programmed for alarm shunt to bypass an alarm loop during entry, or alarm trigger to cause an alarm during forced entry. Five other activation options are available for Relay #2.

    Voice Synthesizer:

    A built-in voice synthesizer sounds voice prompts through the speaker, local and remote telephones.

    Features

    • Cast Housing; Nickel finish
    • Downlighting
    • Voice Prompts, User Friendly, Owner Friendly
    • Two Programmable Outputs Control Two Openings
    • Obstacle Reverse, Alarm Shunt
    • Optional Color CCTV Camera Kit (Model CCM-2)
    • Provisions for Knox Box
    • Simple to Program and Maintain through On Board Keypad, Touchtone Telephone, or Computer with Modem
    • 450 Event Memory Log
    • Supports 100 Entry Codes
    • Supports 100 Block-Coded Transmitters
    • Applications Include Single Residence, commercial Sites, Employee Parking
    • Built-in superheterodyne radio receiver
    • MegaCode format
    • Operating Frequency: 318 MHz
    • Backup battery ready
    • 10" W x 6-1/8" H x 4" D
    Linear RE-2SS Residential Telephone Entry System (Stainless Steel)
    Product Number: ACP00919

    The Model RE-2SS Residential Telephone Entry System is designed for residential or light commercial access control applications. The speakerphone, keypad, radio receiver, and optional color video camera are housed in a rugged enclosure that can be mounted to a pedestal, bolted directly to a wall, or mounted recessed in a wall with the optional trim ring. The die-cast keypad keys have bright, easy-to-read graphics and are lit with overhead lights. The two operation buttons; CALL and HELP, are machined for heavy-duty reliability.

    Operation

    Arriving visitors will approach the unit and place a call to the residence by pressing the CALL button. The RE-2SS will acquire the residenceís local telephone line and generate distinctive rings to the house telephones. The resident, knowing that the distinctive ring is originating from the access area, can answer any house telephone and converse with the visitor. If the resident decides to grant access to the visitor, they can activate either output relay in the RE-2SS by pressing a key on the telephoneís keypad. If the resident decides not to grant access, hanging up or pressing a key will disconnect the visitorís call.

    Call Waiting:

    If the resident is using the telephone at the time a visitor calls, the RE-2SS will sound beeps on the telephone line to announce that a visitor is calling. The resident can press a key on the telephone to place the outside caller on hold and communicate with the visitor. After granting or denying access to the visitor, the outside caller will be re-connected to the resident.

    Call Forwarding:

    Programmable call forwarding allows the RE-2SS to dial any selected telephone number when a visitor presses the CALL button. For example, with call forwarding enabled, the RE-2SS could dial a cell phone to contact the resident while outside or away from the residence. The resident will be able to communicate with the visitor and grant or deny access from the remote telephone.

    Alternate Numbers:

    For installations where multiple residences exist inside the same controlled opening (such as a guest house or granny flat) three alternate calling numbers can be programmed. The alternate numbers can be called by entering a short code at the keypad.

    Local Control:

    The resident can issue control commands from the local telephones without a call from a visitor. By dialing a specific series of digits, the resident can control either of the two relays. The resident an also initiate voice communications with the entry system.

    Access Methods:

    Up to 100 entry codes, from 1 to 6 digits in length, can be programmed. Each entry code can activate either, or both, of the relay outputs. Linearís Model AM-KP keypad can be used as a secondary remote keypad for the RE-2SS.

    Up to 24 sets of block coded MegaCodeģ transmitters (up to 100 transmitters total) can be used to gain access through the RE-2SSís built-in radio receiver. Each transmitter can be individually suspended or re-activated. One facility codes can be programmed to identify each block of transmitters. Programming of individual (non-block coded) transmitters is limited to 24 transmitters by entering one transmitter per block.

    System Features

    Time Zones:

    The RE-2SS contains an internal clock and calendar. Seven Programmable "time zones" allow setting time periods to schedule system functions. Each time zone can be active or inactive on certain days. Keypad entry codes, wireless transmitters, automatic access control, call forwarding, and the "Do Not Disturb" feature can each be set to only be active during a specific time zone period. Up to ten "holiday" days can be programmed. Each of the seven time zones can be set to be active or inactive during a holiday.

    Portal Supervision:

    The SENSE/INHIBIT input can be used two ways. If programmed for "door sense", a switch on the door detects forced entry or door ajar situations. If programmed for "inhibit", the input can be wired to a "service" switch or automatic timer that will disable the Relay #1 when required.

    Hardwired Activation:

    The OPEN REQUEST input can be wired to an exit loop detector or exit photo beam to allow automatic exit activation. An emergency access keyswitch can be mounted in the RE-2SS case to allow keyed entry for authorized personnel.

    Access Security:

    The "anti-passback" feature allows the option of preventing the use of the same code or the same transmitter again before the programmed time elapses. The "keypad lockout" feature discourages tampering by disabling the keypad for three minutes after a programmable number of incorrect entry codes has been entered at the keypad.

    Event Log:

    An access log of up to 450 events is stored in the unitís memory. System activity is logged as it occurs with the date and time of the event. The access log data can be retrieved locally or remotely with a computer through the RE-2SSís built-in modem.

    Local & Remote Programming:

    The systemís built-in programming software can be accessed on-site or off-site using a computer with any Internet browser. The softwareís graphic display of each of the programming step makes programming easy. Without a computer, the RE-2SS can be programmed with its main keypad, from any local telephone connected to the same line, or by calling from any remote telephone.

    The EEPROM memory retains all entry codes, transmitter information, and programming, even without power.

    Obstacle Detection:

    Linearís Model MGT safety edge transmitter is compatible with the RE-2SS. This MGT detects and transmits obstacle events to the RE-2SS receiver. Obstacle signals from an MGT transmitter will activate Relay #2.

    Alarm Interface:

    Relay #2 can be programmed for alarm shunt to bypass an alarm loop during entry, or alarm trigger to cause an alarm during forced entry. Five other activation options are available for Relay #2.

    Voice Synthesizer:

    A built-in voice synthesizer sounds voice prompts through the speaker, local and remote telephones.

    Features
    • Cast Housing; Stainless steel
    • Downlighting
    • Voice Prompts, User Friendly, Owner Friendly
    • Two Programmable Outputs Control Two Openings
    • Obstacle Reverse, Alarm Shunt
    • Optional Color CCTV Camera Kit (Model CCM-2)
    • Provisions for Knox Box
    • Simple to Program and Maintain through On Board Keypad, Touchtone Telephone, or Computer with Modem
    • 450 Event Memory Log
    • Supports 100 Entry Codes
    • Supports 100 Block-Coded Transmitters
    • Applications Include Single Residence, commercial Sites, Employee Parking
    • Built-in superheterodyne radio receiver
    • MegaCode format
    • Operating Frequency: 318 MHz
    • Backup battery ready
    • 10" W x 6-1/8" H x 4" D
       
     
    Linear Telephone Entry
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please