Home > Shop Brands > 3M Macurco Carbon Monoxide & Fixed Gas Detectors & Monitors >

  Macurco MA-CM2B Carbon Monoxide Transducer and Meter

Macurco MA-CM2B Carbon Monoxide Transducer and Meter


 

Our Price : $472.42


Product Code: MA-CM2B

DISCONTINUED. Replaced with part #CM-6.

Description
 
The Macurco CM-2B carbon monoxide transducer features a digital display (0-250ppm), NEMA 1 enclosure, 24 VAC or VDC operation, and 4-20ma output. For use with the 3M Macurco DVP-120 control panel and HVAC/Building Automation Systems.

Specifications:

Power: 3.5 watts (22 to 26.5 VAC or VDC)
Output: 4 to 20 milliamps (ma)
Range: 0 - 250 PPM of Carbon Monoxide
Operating Envir: 0 to 125F, 10 to 90% RH
Repeatability: ±10% at 50 PPM of CO
Linearity: ±10%
Size: 6 X 6 X 3 inches
Shipping Weight: 3 lbs
Color: Gray
Features
  • General guideline on spacing: 5000 sq ft per unit.
  • Locate detector 4 to 5 feet above the floor.
  • The CM-2B connects to any Building Automation System accepting a 4 to 20 ma.
  • The CM-2B has 1000 volt isolated output, common power buses can be used.
  • Microprocessor controlled digital display and analog output.
  • The CM-2B is housed in a UL knockout box, facilitating installation and hook-up.
  • Low voltage operation. Power input 24 VDC or 24 VAC.
  • Field Calibration Kits (CM-2B-FCK) are available.
  • Works into a wide range of loads, namely 0 to 1000 ohms.
  • Supervised solid-state sensor - low maintenance.
  • Analog Transducer, 4 to 20 ma
  • Low maintenance, no periodic calibration required
  • Long sensor life (7 - 10 years)
  • Works with any Building Automation System or other control device
  • Digital display, 0 - 250 PPM of Carbon Monoxide


Browse for more products in the same category as this item:

Shop Brands > 3M Macurco Carbon Monoxide & Fixed Gas Detectors & Monitors
Shop Brands