 |
 |
 |
|
6 LAN with a new tapeless design is an entry grade Category 6 UTP cable. ELT verified to ANSI/TIA-568-C.2 Category 6 and Mohawk internal 6 LAN specification.
- DESCRIPTION
UNSHIELDED TWISTED PAIR (UTP) 6 LAN CABLE FOR USE IN HORIZONTAL
CABLING SYSTEMS PER ANSI/TIA-568-C AND ISO/IEC 11801:2002
CLASS E. THE CABLE MEETS ANSI/TIA-568-C.2 & ISO/IEC 11801:2002
CATEGORY 6 ELECTRICAL CHARACTERISTICS. THE CABLE CONSISTS
OF #23 AWG SOLID BARE COPPER INSULATED CONDUCTORS, ASSEMBLED
INTO FOUR TIGHTLY TWISTED PAIRS, WITH A RIPCORD, UNDER AN
OVERALL JACKET. PRINT INCLUDES DESCENDING FOOTAGE MARKERS
FROM 1000 TO 0 ON EACH 1000 FT REEL OR BOX. THIS PRODUCT
AND/OR ITS MANUFACTURE IS COVERED BY US PATENT NO. 556337.
THE PLENUM RATED CABLE IS FOR USE IN AIR HANDLING
DUCTS AND SPACES IN ACCORDANCE WITH ARTICLE 800 OF THE
NATIONAL ELECTRICAL CODE (NEC). THE CABLE IS ETL (USA) & cETL
(CANADA) LISTED FOR THIS APPLICATION BY PASSING NFPA 262 (FT6
OR PREVIOUSLY UL 910 STEINER TUNNEL) TEST.
THE RISER (NON-PLENUM) RATED CABLE IS FOR USE AS A VERTICAL
RUN IN A SHAFT AND FOR GENERAL PURPOSE COMMUNICATIONS USE
IN ACCORDANCE WITH ARTICLE 800 OF THE NATIONAL ELECTRICAL
CODE (NEC). THE CABLE IS UL (USA) & cUL (CANADA) LISTED FOR THIS
APPLICATION BY PASSING THE UL 1666 RISER CABLE FLAMMABILITY
TEST. THE CABLE ALSO PASSES THE CSA FT4 VERTICAL FLAME TEST -
CABLES IN CABLE TROUGH FROM CLAUSE 4.11.4 OF CSA C22.2 NO. 0.3.
SUPPORTED APPLICATIONS
IEEE 802.3an 10GBASE-T (10 GIGABIT ETHERNET), 1000BASE-T (GIGABIT
ETHERNET), 100BASE-T (FAST ETHERNET), AND IEEE 802.3 10BASE-T
(ETHERNET), IEEE 802.3af POWER OVER ETHERNET FOR VoIP,
ANSI.X3.263 FDDI TP-PMD, IEEE 802.5 4 AND 16 Mbps TOKEN RING, ATM
UP TO 1.2 Gbps, 550 MHz BROADBAND VIDEO AND STANDARDS UNDER
DEVELOPMENT SUCH AS ATM AT 2.4 AND 4.8 Gbps.
CONSTRUCTION
PRIMARIES: CONDUCTOR: 23 AWG (.6 mm PL, .5mm NP) SOLID
BARE COPPER
INSULATION: PL: DUAL INSULATION, FEP ON ALL 4
PAIRS
NP: THERMOPLASTIC POLYOLEFIN
PAIR ASSEMBLY: 2 PRIMARIES TWISTED IN VARIED LAYS
COLOR CODE: SEE TABLE 1
CABLE ASSEMBLY: 4 PAIRS CABLED TOGETHER
JACKET: PL: NO LEAD PLENUM RATED THERMOPLASTIC
NP: NO LEAD FLAME RETARDANT THERMOPLASTIC
JACKET COLOR SEE TABLE 2
NOMINAL CABLE OD: PL: .220” (5.59 mm)
NP: .220” (5.59 mm)
LISTINGS: UL OR ETL VERIFIED TO TIA 568-B.2-1 CAT 6
PL: C(UL)US C(ETL)US TYPE CMP
NP: C(UL)US C(UL)US TYPE CMR
PL = PLENUM
NP = NON-PLENUM
™
PHYSICAL CHARACTERISTICS
CABLE WEIGHT: PL: 28 lbs/1000ft (42 kg/km)
NP: 24 lbs/1000ft (36 kg/km)
BENDING RADIUS: 1” (25mm) MIN (4 X CABLE OD)
PULLING TENSION: 25 lbf (110 N) MAX
OPERATING TEMP.: -20ºC to +60ºC (-4ºF to +140ºF)
STORAGE TEMP.: -20°C to +75°C (-4°F to +167°F)
INSTALLATION 0°C to +60°C (+32°F to +140°F)
TEMP.*:
*THE INSTALLATION TEMPERATURE REFERS TO THE TEMPERATURE OF
THE CABLE WHILE BEING INSTALLED OR PULLED. DO NOT INSTALL CABLE
BELOW 0°C (+32°F).
ELECTRICAL CHARACTERISTICS
CONDUCTOR DCR: 7.8 Ω/100m (23.8 Ω/Mft) MAX
DCR UNBALANCE: 3% MAX
MUTUAL
CAPACITANCE: 46 pF/m (14 pF/ft) NOM
CAPACITANCE UNBALANCE
PAIR/GROUND: 66 pF/100m (200 pF/Mft) MAX
CHARACTERISTIC
IMPEDANCE: 100 Ω ± 15% (1-250 MHz)
INPUT 100 Ω ± 15% (1-100 MHz)
IMPEDANCE: 100 Ω ± 20% (>100-200 MHz)
100 Ω ± 25% (>200 MHz)
RETURN LOSS (RL): 20 + 5 log10 (f ) dB MIN (1-10 MHz)
25 dB MIN (>10-20 MHz)
25 - 7 log10 (f /20) dB MIN (>20 MHz)
INSERTION LOSS: 1.808 √f + .017f + .20/√f dB/100m MAX
NEAR END
CROSSTALK (NEXT): 44.3 - 15 log10 (f /100) dB/100m MIN
POWER SUM NEAR END
CROSSTALK (PS NEXT): 42.3 - 15 log10 (f /100) dB/100m MIN
EQUAL LEVEL FAR END CROSSTALK
(ELFEXT): 27.8 - 20 log10 (f /100) dB/100m MIN
POWER SUM EQUAL LEVEL FAR END CROSSTALK
(PS-ELFEXT): 24.8 - 20 log10 (f /100) dB/100 MIN
PROPAGATION DELAY: 534 + 36 / √f ns/100m MAX
DELTA DELAY (SKEW): 45 ns/100m MAX
NOMINAL VELOCITY OF 72% PL
PROPAGATION (NVP): 68% NP
WHERE f = FREQUENCY IN MHz from .772 to 250 MHz.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 25 year Warranty (available with MAC program)
- 24 dB Minimum ACR @ 100 MHz – Proven support for Gigabit Ethernet / 1000BASE-T / IEEE 802.3ab, ATM up to 155 Mbps, IEEE 802.3af Power Over Ethernet for VoIP, 100 Mbps Fast Ethernet / 100BASE-T / IEEE 802.3, ANSI.X3.263 FDDI TP-PMD, Ethernet / 10BASE-T / IEEE 802.3, 4 & 16 Mbps Token Ring / IEEE 802.5, T1/E1, xDSL, ISDN, 550 MHz Broadband Video and standards under development such as ATM at 622 Mbps, 1.2 and 2.4 Gbps
- 9 dB Minimum – Improvement in Near End Crosstalk vs. Category 5e NEXT
- Enhanced Performance Parameters – All electrical characteristics proven to meet TIA/EIA 568-B.2-1 and ISO/IEC 11801 Category 6 requirements: NEXT and ELFEXT (Pair-to-Pair and Power Sum), Insertion Loss, Return Loss, and Delay Skew
- This cable and/or its manufacture is covered by US Patent Nos. 6998537, 6570095, 5424491 and 7179999
|
|
|
|
|
|
|
|
|
