F/UTP is a foil backed shield over the cable core with a drain wire under the foil shield. This cable is tested to 550 MHz and third party verified to category 6.
With Mohawk’s FlexWeb construction, the cable isolates the pairs throughout the length of the cable, while providing a round installer-friendly cable.
-24 dB Minimum ACR @ 100 MHz - Proven support for Gigabit Ethernet / 1000BASE-T / IEEE 802.3ab, ATM up to 155 Mbps, 100 Mbps Fast Ethernet / 100BASE-T / IEEE 802.3, ANSI.X3.263 FDDI TP-PMD, Ethernet / 10BASE-T / IEEE 802.3, 4 & 16 Mbps Token Ring / IEEE 802.5, T1/E1, xDSL, ISDN, 550 MHz Broadband Video and standards under development such as ATM at 622 Mbps, 1.2 and 2.4 Gbps.
-9 dB Minimum - Improvement in Near End Crosstalk vs. standard Category 5e NEXT.
-0.30 ns/meter Maximum Skew - Tightly controlled propagation delay.
-100% insulation (plenum)
-Enhanced Performance Parameters - All electrical characteristics proven to exceed TIA/EIA-568-B.2-1 and ISO/IEC 11801 Category 6 requirements: NEXT and ELFEXT (Pair-to-Pair and Power Sum), Insertion Loss, Return Loss, and Delay Skew.
-Use All Shielded Components for a Shielded or Screened System - Mohawk strongly recommends the use of shielded or screened connecting hardware, and all shielded or screened cords: patch, work area and equipment cords should be used throughout the structured cabling system.
-This cable and/or its manufacture are covered by US Patent Nos. 6,596,944, 6,074,503 and 5,424,491.
Length: 1000 FT
No. of Pairs or Cond.: 4 Pair
Jacket Material: Thermoplastic
Brand or Series: F/UTP
Cable Type: Plenum, F/UTP