Home > Shop Brands > Napco Security >

  Napco NAP-GEMPIR Napco Wireless PIR 50' X 50' Battery

Napco NAP-GEMPIR Napco Wireless PIR 50' X 50' Battery


Our Price : $112.81

Product Code: NAP-GEMPIR


The GEM-PIR is an advanced PIR sensor designed for use with Napco's GEM-Series wireless receivers. The unit is powered by two 3-volt lithium batteries (supplied) for long service life. When battery voltage drops below normal, a low-battery report will be sent to the receiver (replace with Duracell DL123A or Varta/Power-One CR123A only). Coding switches are not used in the GEM-PIR. Each transmitter has a unique factory-programmed RF ID code (printed on the unit) that distinguishes itself to the receiver. (Note: See control-panel instructions for entering this six digit hexadecimal code and checksum digit into the panel; be sure to enter all numbers and/or letters, including leading zeros, if any).


PIR Coverage (l x w): 50' x 50' (15.2m x 15.2m) at 20C (68F), typical.
Operating Temperature: 0 to +50C (32 to 122F)
Mounting: Wall or corner, 10' (3m) max.
Dimensions: 4.5'' x 2.5'' x 1.7'' (11.4cm x 6.4cm x 4.3cm) (HxWxD)
Shipping Weight: 6.4oz (181gm)
  • Signal Selective Processing for reliable operation
  • Unique circuit design protects against false alarms due to radio-frequency interference
  • Vertical and horizontal aiming capabilities
  • Dual-element sensor
  • Lens Bank of optional accessory lenses
  • Large lens area assures high sensitivity
  • Small size with ample wiring space
  • Corner mountable
  • Built-in Tamper microswitch

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Napco Security

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please