Home > Shop Brands > Napco Security >

  Napco NAP-VIPGATEWAYX24 4 Camera IP Module

Napco NAP-VIPGATEWAYX24 4 Camera IP Module


Our Price : $519.71



The NAPCO VIP-GATEWAY is a module that converts any 4 analog CCTV cameras into internet ready IP cameras. It provides video images with a maximum of 640 x 480 lines of resolution that can be viewed through the VideoAlert server on virtually any computer in the world at up to 5 fps. The Gateway provides 4 input triggers that when activated, will prompt the transmission of video clips to the VideoAlert.net server. It also has a local video output that provides a sequenced video output of the 4 cameras. There are also an additional 4 inputs that allow the user to lock in one of the cameras to the local output. The Gateway provides (at no additional service charge) dynamic IP support through the NAPCO InfoServer DNS server - every 16 seconds the Gateway checks in with its DNS server to insure that the DHCP IP address is always kept current.
  • 4 video inputs, accepts any analog CCTV camera.
  • 1 channel video output, NTSC or PAL.
  • 1 trigger input per channel to trigger transmission of video for archiving on
  • VideoAlert.net server. (Note: 1 additional trigger in and 1 additional trigger out is available on the power supply connector assembly.)
  • Programmable trigger on video motion detection.
  • Built-in motion detection scan time x 4 channels: 1 second. (approx. 250mS x channel)
  • 14 seconds of pre-alarm images per channel.
  • Adjustable image size: 640x480, 320x240 and 160x120 Setup up through active-X server application.
  • Dynamic IP support (without the need of any 3rd party addition or service) via built InfoServer DNS technology.
  • RJ45 GATEWAY is designed for 10Mbps Ethernet networks. GATEWAY connects to the network via UTP (Unshielded Twist Pair) Category 5 cable.
  • Power & Trigger I/O GATEWAY adopts unique RJ12 cable for power supply.
  • The special featured RJ12 cable includes input/output (I/O) function.
  • Simply connect the input/output cable to desire device and no hardware jumper on camera is required.
  • Video out and video in 1 channel NTSC or PAL video output, can connect with PC and televisions, 4 channel
  • NTSC or PAL video input available, turn analog video cameras into IP cameras.
  • NTSC Local Video Output with Switching: Selectable “dwell time” via Web interface for local viewing or distribution.
  • Local Video Output Latching - Video from cameras 1-4 may be latched to the Video Output by shorting input triggers 1b - 4b respectively.
  • Transmission Protocol: UDP. UDP Port used: Port 80 or any above 1000.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Napco Security

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please