You are here: Home > Shop Brands > Napco Security > Reporting > NetLink: Alternative VoIP solution
We found 4 results matching your criteria.
NetLink: Alternative VoIP solution
Sort By:
Page of 1
Napco Net Link NL-CSRCV - Windows-based NetLink Software - NLCSRCV Napco Net Link NL-MOD-SK - NetLink Starter Kit: NL-MOD interface module+ PCD-Windows CD (includes NL-MODCONFIG) + GEM-P9600 Software Enhancement EPROM + RJ12 + Straight through RJ-45 LAN cable + Crossover RJ-45 LAN - NLMODSK
Napco’s NetLink™ NL-CSRCV Windows-based software receives reports on a standard PC, providing cost-effective, secure internet alarm reporting without requiring the purchase/maintenance/ upkeep of a traditional, old-fashion proprietary receiver. It makes getting onsite alarm reports at a security office quick and convenient, and transforms their standard PC into an alarm report receiver, locally displaying alarms, event history (open/closes), etc. Receiving alarm reports via internet/intranet can save thousands of dollars versus traditional T1 phone line costs. NL-CSRCV even allows high-speed downloading via campus LAN & supports network-based automation routines. (Optionally, for a turnkey solution, NL-CSRCV/PC is the software, above, preinstalled & preconfigured on a compatible computer system.)
Napco Net Link NL-MOD-SK - NetLink Starter Kit: NL-MOD interface module+ PCD-Windows CD (includes NL-MODCONFIG) + GEM-P9600 Software Enhancement EPROM + RJ12 + Straight through RJ-45 LAN cable + Crossover RJ-45 LAN - NLMODSK The NL-CSRCV NAPCO NetLink Receiver Application software must be purchased separately and is not included in the NL-MOD-SK.
Napco NetLink Module, NL-MOD, will allow Napco Gemini Panels, from the P816 thru the X255, to fully, securely communicate alarms, status, supervisories, etc., pinpointed “by zone” over the internet to the central station‘s PC running NL-CSRCV Central Station application software or NetLink TCP/IP UL Receiver(s) NL-RCV-RMPCUL, below), using secure, NIST/AES 128bit encryption. At the central monitoring office, the panel module source is immediately received, authenticated as a valid account, and its alarm reports decoded and sent to awaiting CS operators for disposition. (NL-MOD is initially set using NL-MODCONFIG, a download software utility for programming/configuring the panel module.)
Napco Net Link NL-RCV-RMPCUL - UL864/UL1610- listed NetLink™ Receiver - NLRCVRMPCUL Napco NL-MOD-UL - NetLink Panel Module for by-zone reporting of Gemini P816 through X255 panels, UL Listed - NLMODUL
Napco’s UL864/UL1610- listed NetLink™ Receiver is an advanced, rackmounted receiver enabling cost-effective, secure internet alarm reporting designed to address the increasing need for UL central stations to adopt new receiver technologies to combat the widespread adoption of Voiceover Internet Protocol (VoIP) services, i.e., in place of traditional telco services. While in full compliance with UL Central Station applications, requiring primary and mirrored, backup receivers, two (2) NetLink UL Receivers can be installed at the same cost as a single traditional receiver. Both NetLink TCP/IP UL Receivers interface with the conventional CS automation system and are simply connected to each other with a network crossover cable, where the secondary mirrored receiver serves as a Hot Backup, duplicate receiver. NetLink UL TCP/IP Receivers feature two modes of operation, Automatic Mode, where alarm signals are sent normally to the automation system for processing, or Manual Mode, used when direct operator interaction is desired, accomplished thru an easy, menu-driven keypad-style alphanumeric interface on the face of the receiver. Listed for UL864 (Control Units for Fire Protective Signaling Systems) and UL1610 (Central Station Burglar Alarm Units).
Napco NetLink Module, NL-MOD, will allow Napco Gemini Panels, from the P816 thru the X255, to fully, securely communicate alarms, status, supervisories, etc., pinpointed “by zone” over the internet to the central station‘s PC running NL-CSRCV Central Station application software or NetLink TCP/IP UL Receiver(s) NL-RCV-RMPCUL, below), using secure, NIST/AES 128bit encryption. At the central monitoring office, the panel module source is immediately received, authenticated as a valid account, and its alarm reports decoded and sent to awaiting CS operators for disposition. (NL-MOD is initially set using NL-MODCONFIG, a download software utility for programming/configuring the panel module.)
   
 
NetLink: Alternative VoIP solution
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please