 |
 |
 |
|
Converts 115VAC/60Hz into 6/12VDC @ 2.5A of continuous supply current (24VDC @ 1A). Comes with a plug in 24V 50VA transformer, 5AH battery, battery leads and hardware. Filtered and electronically regulated output. Built-in charger for sealed lead acid or gel type batteries. Automatic switchover to stand-by battery. Circuit breaker battery protection. AC input and DC output LED diagnostic indicators. For 24VDC, an additional BAT-3 must be ordered separately. Enclosure dimensions: 10" H x 10" W x 4.5" D (25cm H x 25cm W x 11.5cm D). HPS123 This power supply unit includes the power supply board (p/n HPS3), a plug-in transformer, steel enclosure (p/n HPB407), 5 Ah 12 V battery, battery leads, and connecting hardware. The HPS123 switching power supplies/charger kit converts low voltage AC input into 6 VDC or 12 VDC @ 2.5 A of continuous supply current, or 1 A @ 24 VDC. This general-purpose power supply has a wide range of applications for access control, security and CCTV systems that require additional power. For convenient operation, this power supply unit includes the power supply board (p/n HPS3), a plug-in transformer, steel enclosure (p/n HPB407), 5 Ah 12 V battery, battery leads, and connecting hardware.
Switch selectable 6 VDC/12 VDC. At 6 VDC or 12 VDC, the output is 2.5 A total; at 24VDC, the output is 1 A total.
If a battery charger is used, subtract max charge current of 400 mA from total to determine allowable load. Input HPS3: 2.3 A max at 24 VAC 60Hz, Transformer: 0.5 A max at 120 VAC 60Hz HPS123 includes the power supply (HPS3) and a 24 VAC thermally limited 50 VA plug-in transformer. Do not use enclosed battery for 6 VDC output; use a 6 VDC, 5 Ah battery (suggested: Powersonic PS-650L). UL-listed to UL294 Access Control Systems and UL2044 CCTV Equipment. Filtered and electronically regulated output. Built-in charger for sealed lead acid or gel type batteries. Stand-by specification: - At 6 VDC, unit provides one hour of stand-by at 1.7 A with a 6 V, 5 Ah battery.
- At 12 VDC, unit provides one hour of stand-by at 2.1 A with a 12 V, 5 Ah battery.
- At 24 VDC, unit provides one hour of stand-by at 600 mA with two 12 V, 5 Ah batteries
Automatic switchover to stand-by battery when AC fails. Thermally limited design. Circuit breaker battery protection. AC input (green) and DC output (red) LED diagnostic indicators. Hinged cover and vented enclosure with five convenient knockouts. Temperature range: 32ºF to 120ºF (0ºC to 49ºC); indoor use only. Enclosure dimensions: 10" H x 11.5" W x 4.875" D (25.4 cm H x 29.21 cm W x 12.38 cm D).
|
|
|
 |
|
 |
|
|
|
