Home > Access Control > Keypads >


Northern Computers NC-KP12 Exterior/Interior 2 x 6 Mullion Matrix Keypad, Stainless

Northern Computers NC-KP12 Exterior/Interior 2 x 6 Mullion Matrix Keypad, Stainless


Our Price : $242.50

UPC Code: 781410268753

Product Code: 482027


Exterior or interior 11 conductor keypad suitable for mounting on mullion frames. The keypad area uses a stainless steel overlay. Used only with the N-1000-II, N-1000-III and N-1000-IV in card and pin configuration. Dimensions: 7.5" H x 1.75" W x .75" D (19.05cm H x 4.45cm W x 1.91cm D). Operating temperature range: -40 to 158 F (-40 to 70 C).

The Northern Computers' KP-10, KP-11, KP-12, and KP-13 keypads offer security without the use of a card. The users need only enter their personal numerical code to gain access.

The unsurpassed ability of these keypads to tolerate virtually any environment enables them to function reliably in extreme climate conditions, yet their aesthetic design allows for installation inside any office building. The KP-10 and KP-11 keypads are constructed out of stainless steel. The KP-12 and KP13 keypads are constructed of a durable plastic.

The piezo technology allows the keypads to be activated by user touch, without any moving parts or contacts that can corrode over time. An audible beep and visual indication are generated with each key pressed. The elimination of moving parts gives these keypads unquestioned dependability.

The KP-10 and KP-12 keypads can also be used in conjunction with a card reader of choice to provide a higher level of security.


  • Rugged Stainless Steel construction.
  • Weather Resistant.
  • Vandal Resistant.
  • No moving parts to wear out.
  • Impact resistant.
  • Status monitoring LED's.
  • Intrinsically safe in explosive environments.
  • Audible and visual feedback
  • 5.125 x 3.375 inches (130 x 86mm) size.
  • -40 to 160 F (-40 to 70 C) operating temperature.
  • KP-10, 12 conductors 18 AWG (0.75mm) Shielded cable, 2 of 7 matrix output.
  • KP-11, 5 conductors 18 AWG (0.75mm) Shielded cable, 32bit Wiegand output.
  • KP-10 and KP-12 provide 2 of 7 matrix output

  • KP-11 and KP-13 emulate a 32 bit Wiegand output

  • KP-11 and KP-13 are selectable for 5 or 12 volts

  • KP-11 and KP-13 have programmable site code



KP-10/KP-11 - 5.125" H x 3.375" W x .50" D

(13.018 cm H x 8.573 cm W x 1.27 cm D)

KP-12/KP-13 - 7.50" H x 1.75" W x .75" D

(19.05 cm H x 4.445 cm W x 1.905 cm D)

Weight - 16 oz (470 gm)

Operating Temperature - 40 F to 160 F (40 C to 71 C )

100% relative humidity (weather resistant)

Mounting Methods

KP-10/KP-11 - Directly to a single gang switchbox or surface

mount by direct wiring through a wall

KP-12/KP-13 - Mullion or surface mountable


KP-10/KP-12 - Requires 12 conductor (0.75 mm) shielded cable,

12 wire, 18 AWG, NC18121-YL-500 or

NCP1821-YL-500 (Plenum),

maximum distance: 500 ft (152 m)

KP-11/KP-13 - Requires 5 conductor with overall shield cable,

5 wire,18 AWG NC1861-BL-500 or

NCP1861-BL-500 (Plenum),

maximum distance: 500 ft (152 m)

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Access Control > Keypads
Shop Brands > Honeywell Access Systems (formerly Northern Computers) > Keypads

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please