You are here: Home > Burglar Alarms / Intrusion >

Sensors for Burglar Alarm Systems

>

PIRs & Motion Sensors for Burglar Alarm Systems

>

Out-Door PIR Sensors for Burglar Alarm Systems

We found 62 results matching your criteria.
Burglar alarms with out-door PIR sensors can detect an intruder before they reach a building, or in the act of compromising a shed, vehicle, or general perimeter area. Our full line of out-door PIR alarm systems sensors are equipped with devices that detect tampering efforts and false stimuli, and can automatically run self-test programs to indicate malfunction. Be it for a home alarm or commercial alarm, we carry the right out-door PIR sensor for effective security monitoring.
Sort By:
Page of 6
Ademco 995 - 40' x 56' Flush / Recess Mount PIR Motion Detector Ademco AURORA PIR Motion Sensor
Superior RFI Test Methods

The Radio Frequency Interference (RFI) test method used by ADEMCO's Quality Assurance department is superior to the methods used by most other manufacturers.

A Transverse ElectroMagnetic (TEM) cell used by most other manufacturers is a small chamber in which products are placed and then irradiated with RF energy at an established level to try to induce a false alarm. Unfortunately, TEM cells are susceptible to standing waves and other phenomena which have a tendency to overstate the level of immunity.

ADEMCO uses a full-size, shielded RF chamber that more realistically emulates real world conditions. To maintain high accuracy, the chamber is calibrated to the desired RF energy level at every test frequency prior to running each test. Comparison tests between and ADEMCO's full-size chamber and a TEM cell have shown that an immunity of 10V/m in ADEMCO's chamber corresponds to an immunity of 20-30V/m in a TEM cell.

Features:
  • 40' x 56' coverage
  • Attractive styling
  • Fits single gang box or can be recessed into wall
  • Built-in "Signature Analysis" pulse count reduces false alarms
  • Horizontal and vertical adjustment
  • Excellent RFI immunity
  • SMD construction
  • 6 year over-the-counter warranty
  • Don't be fooled by its small size! Next-generation Split-Zone Optics and advanced ASIC-based processing give the pet immune Aurora laser-sharp detection.

    Features:
  • Immune to pets up to 40 lbs.
  • Advanced ASIC-based processing
  • Split-Zone Optics technology
  • Ultra-low current
  • Totally silent relay operation
  • Tamper proof design

    Specifications:
  • Detection Method Dual Element Passive Infrared
  • Coverage: Pet Immune Lens: 35' x 45' (10.6m x 13.7m); Long Range Lens: 75' x 10' (23m x 3m) - Optional part number Aurora-LR
  • Detection Zones (2 fingers per Zone: Pet Immune Lens: 28 zones (eight over eight long range, eight intermediate, four short range); Long Range Lens: 6 zones (one over one long range, two intermediate, two short range)
  • Pulse Processing: Intermediate, Standard or Harsh, selectable via jumper link
  • Temperature Compensation: Advanced dual-slope temperature compensation adjusts for above and below body temperature
  • Tamper proof design: Alarm relay cannot be compromised with a magnet
  • Detectable Walk Rate: 0.5-10ft/sec (.15-3m/sec)
  • Mounting Height: 7ft. (2.1m) recommended for pet installations
  • Indicator: Red LED, enabled/disabled via jumper link
  • Alarm Rela: Form A, SPST, 90mA @ 16VDC with 15-Ohm protective resistor
  • Input Voltage: 8-16 VDC (Voltage reversal makes PIR inoperative)
  • Current: 4 mA (standby; 4 mA nom. (alarm, LED disabled; 10 mA nom. (alarm, LED enabled) (All current nominal at 12 VDC)
  • Operating Temp: 14F to 122F (-10C to +50C)
  • Operating Humidity: Up to 95% RH (max.), non-condensing
  • Dimension: 2.9" W x 4.1" H x 1.5" D (60mm x 104mm x 38mm) (max protrusion)
  • ALEPH AL-CM36018 Ceiling Mounted PIR Intrusion Detector ALEPH AL-CM36033 Ceiling Mounted PIR Intrusion Detector
    ALEPH AL-CM36018 Ceiling Mounted PIR Intrusion Detector

    CM360 Series Ceiling Mount Sensors “Four Heads Are Better Than One”

    The ALEPH CM360 series ceiling mount sensors are dedicated high ceiling omni-view PIR intrusion detectors. Each model allows choice of 4 switch selectable dual pyro detection patterns 90°, 180°, 270° or 360°. With selectable Pulse Count and Sensitivity adjustments the CM360 allows absolute detection in extreme security applications.

  • Switch Selectable Detection Patterns (90°, 180°, 270° or 360°)
  • Sensitivity Control
  • Pulse Count and LED Selectable
  • 4 Dual Pyro Elements
  • UL listed
  • AL-CM36018 18’ Max. Mounting Ht. 80 Ft. Diameter Detection Distance
  • REPLACES PR-CM36018
  • ALEPH AL-AL-CM36033 Ceiling Mounted PIR Intrusion Detector

    CM360 Series Ceiling Mount Sensors “Four Heads Are Better Than One”

    The ALEPH CM360 series ceiling mount sensors are dedicated high ceiling omni-view PIR intrusion detectors. Each model allows choice of 4 switch selectable dual pyro detection patterns 90°, 180°, 270° or 360°. With selectable Pulse Count and Sensitivity adjustments the CM360 allows absolute detection in extreme security applications.

  • Switch Selectable Detection Patterns (90°, 180°, 270° or 360°)
  • Sensitivity Control
  • Pulse Count and LED Selectable
  • 4 Dual Pyro Elements
  • UL listed
  • AL-CM36033 33’ Max. Mounting Ht. (highest in the industry) 100 Ft. Diameter Detection Distance
  • REPLACES PR-CM36033
  • Bosch DS306E Wall Mount PIR Detector Bosch DS307 Wall Mount PIR Intrusion Detector
    The wall mount DS306E PIR Detector has field replaceable pointable mirrors and uses Motion Analyzer II signal processing to reduce false alarms. The detector's optics, coverage patterns, and mounting options provide installation flexibility.

    Features

  • Motion Analyzer II processing
  • Field replaceable pointable mirrors
  • Three coverage patterns
  • Four mounting options

    REPLACES DS-DS775

    REPLACES DS-DS774I

  • The DS307 PIR Intrusion Detector uses Motion Analyzer II signal processing to reduce false alarms. The detector?s internally pointable mirrors, three coverage patterns, and four wall mounting options provide installation flexibility.

    Features

  • Motion Analyzer II processing
  • Motion Monitor supervision
  • PIR supervision
  • LED indicator
  • Three sensitivity settings

    REPLACES DS-DS776Z

  • Bosch DS934 Wall Mount PIR Detector Bosch DS935Z Wall Mount PIR Intrusion Detector
    The wall mount DS934 PIR Detector uses Motion Analyzer II signal processing to reduce false alarms. Field replaceable pointable mirrored optics, four different coverage patterns, and three different mounting options provide installation flexibility.

    Features

  • Motion Analyzer II processing
  • Pointable mirrored optics
  • 4 coverage patterns
  • 3 mounting options
  • Draft/insect immunity

    REPLACES DISCONTINUED DS-DS932X

  • The DS935Z is a wall-mounted, Passive Infrared (PIR) Intrusion Detector that uses Motion Analyzer II signal processing to reduce false alarms. Several unique test features including Motion Monitor provide coverage integrity. Motion Analyzer II uses multiple thresholds and timing windows to analyze timing, amplitude, duration and polarity of signals to make an alarm decision. This detector provides Motion Monitor supervision which features verify that the detector has a clear view of the detection area. If the detector has not alarmed at least once during the selected supervision interval (4 or 30 days), a trouble condition is indicated. The DS935Z will not signal an alarm on extreme levels of heat and light produced by heaters, air conditioners, hot and cold drafts, sunlight, lightning or moving headlights. The detector's internally pointable mirrored optics, 4 coverage patterns and 3 different mounting options provide installation flexibility. Externally visible alarm LED flashes to indicate trouble condition.

    Features

  • Motion Analyzer II processing
  • Motion Monitor
  • Self-test supervision systems
  • Field replaceable pointable mirrored optics
  • 4 coverage patterns, 3 mounting options
  • Draft / insect immunity
  • Bosch DS940 Wall Mount PIR Detector without Tamper Switch Bosch DS940T Wall Mount PIR Detector with Tamper Switch
    DS940 Wall Mount PIR Detector without Tamper Switch

    The DS940 is a wall-mount, Passive Infrared (PIR) Intrusion Detector. This UL Listed sensor features "grooves-in" Fresnel lenses that provide superior catch performance. It offers simple and cost-effective installation with "any height" mounting between 7.5 and 9 feet with no necessary adjustments.

    Features

  • First Step Processing (FSP)
  • Easy to install with flexible mounting options
  • Small unobtrusive design
  • 40 ft. (12 m) broad coverage
  • Bracket mounting option
  • Draft/insect immunity
  • DS940T Wall Mount PIR Detector with Tamper Switch

    The DS940 is a wall-mount, Passive Infrared (PIR) Intrusion Detector. This UL Listed sensor features "grooves-in" Fresnel lenses that provide superior catch performance. It offers simple and cost-effective installation with "any height" mounting between 7.5 and 9 feet with no necessary adjustments.

    Features

  • First Step Processing (FSP)
  • Easy to install with flexible mounting options
  • Small unobtrusive design
  • 40 ft. (12 m) broad coverage
  • Bracket mounting option
  • Draft/insect immunity
  • Caddx 60-511-01-95 - Learn Mode Ds924I PIR Motion Sensor Crow EDS-2000 DUO QUAD PIR AND MICROWAVE K-BAND OUTDOOR SENSOR

    Standard Features


    • Detects movement inside an enclosed structure
    • Use in large rooms, narrow corridors, and stairwells
    • Passive infrared detection
    • 3 sensitivity settings
    • Includes masking kit to adjust coverage pattern
    • 3-minute motion lockout to conserve battery life
    • Description: 
    LEARN MODE DS924I PIR MOTION SENSOR  
    Battery Life[Nominal]
    5.0 yr
    Battery Type
    Lithium
    Color
    Belgian gray
    Depth[Nominal]
    1.75 in
    Height[Nominal]
    4.38 in
    Operating Temperature[Minimum]
    10.0 °F
    Operating Temperature[Maximum]
    120.0 °F
    Tamper Switch
    Yes
    Width[Nominal]
    2.75 in
    Crow EDS-2000 DUO QUAD PIR AND MICROWAVE K-BAND OUTDOOR SENSOR - EDS2000

    Crow has developed a range of enhanced outdoor detectors providing maximum security against unauthorized entry to a building or a house and their perimeter.

    Crow’s outdoor devices offers different models to suit the specific needs of the installer given the location parameters to be taken into account for best catch performance and false alarm prevention.

       
     
    Out-Door PIR Sensors for Burglar Alarm Systems
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please