You are here: Home > Burglar Alarms / Intrusion >

Accessories for Burglar Alarm Systems

>

Antenna for Burglar Alarms Systems

>

Outdoor Antennas for Burglar Alarm Systems

We found 17 results matching your criteria.
Burglar alarms need outdoor antennas that provide both clear communications and resistance to the elements. Security Store USA offers outdoor antennas for commercial and home alarms in every basic configuration, such as panel, dish, patch, grid disk, dipole, and Yagi. Choose from bi-directional and omni-directional units for RF, GSM, and other cellular transmissions. We also sell outdoor alarm systems antenna kits and accessories.
Sort By:
Page of 2
CDW-Select 1138176 Linksys Antenna 9DBI D-Link ANT241400 14D Bi-Directional Outdoor Panel Antenna
Increase the range of the Wireless network for your Business! Attach these antennas to the WAP54GPE Exterion Access Point and increase both the effective strength of the outgoing signals and the receive sensitivity of the incoming signals.

The added signal strength and sensitivity also improves mid-range communication reliability because every packet comes through "loud and clear", reducing retransmissions due to weak signal reception errors.

The 9dBi signal strength allows the signals to travel further and detect the signals stronger in a 360 degree radius.

The weatherproof housing is able to withstand harsh outdoor conditions. The HGA9N includes a lightning surge protector, mounting kit, and cable.

  • High-powered 9 dBi Omni-Directional Antenna increases the signal strength of the WAP54GPE Access Point for wireless coverage around 360 degree radius
  • Omni-Directional Antenna makes coverage unconstrained to a specific area
  • Lightning protector and weatherproof for safe deployment on the exterior of your building
  • Easy to install - no software configuration is required
  • The D-Link ANT24-1400 connects to the DWL-900AP+, DI-614+, DI-714P+, DWL-900AP, DI-714 and DI-713P to extend the range of coverage for the wireless network. The D-Link ANT24-1400 antenna provides extended coverage for an existing 802.11b wireless local area network (WLAN).

    The D-Link ANT24-1400 comes with a conversion cable that allows connection directly to the D-Link DWL-900AP+ wireless access point, DI-614+ wireless router, DI-714P+ wireless router, DWL-900AP wireless access point, DI-714 wireless router and the DI-713P wireless router Rev C1 or later wireless broadband router.

    The D-Link ANT24-1400 requires an access point or wireless broadband gateway with a reverse SMA connector. The D-Link ANT24-1400 comes with a conversion cable that allows connection directly to the DWL-900AP+ wireless access point, DI-614+ wireless router, DI-714P+ wireless router, DWL-900AP wireless access point, DI-714 wireless router and the DI-713P wireless router Rev C1 or later wireless broadband router.

    Includes the following items: Mounting Kit, Lightning Surge Protector and Conversion Cable.

    Features/Specifications
  • Frequency range: 2.3-2.5GHz
  • Gain: 14 dBi
  • VSWR: 1.5:1 Max
  • Polarization: Linear, vertical
  • HPBW
  • - horizontal - 30
  • - vertical- 30
  • Front to Back Ratio: 15 dB
  • Downtilt: 0
  • Power handling: 50W (cw)
  • Impedance: 50 Ohms
  • Connector: N female Cable
  • (N-male to RP-SMA plug) - 1.65 feet (0.5 meter)
  • - 0.83db lost per meter
  • Environmental & Mechanical Characteristics
  • Temperature: -40F to 176F ( -40C to 80C)
  • Humidity: 100%@ 77F (25C)
  • Lightning protection: DC ground
  • Radom color: Gray-white
  • Radom material: ABS, UV resistant
  • Weight: 1.82 lbs (0.825kg)
  • Dimensions: 9.45 x 9.45 x 2.74 in. (240 x 240 x 69.5 mm)
  • Survival wind speed: 112 miles/hr
  • Honeywell GSM-ANT3DB  Weatherproof Remote Antenna Honeywell GSM3DB25KT  Includes GSM-ANT3DB antenna, WA7626-CA SMA to N adaptor Cable, 25 ft Coax Cable
    Honeywell offers remote antennas designed to increase GSM signal transmission capability. These durable, low-profile antennas are designed to allow flexible integration with GSM communication devices.

    The GSM-ANT3dB Weatherproof Remote Antenna optimizes transmissions with field diversity technology. Its versatile, weatherproof design is suitable for indoor or outdoor applications.

  • Frequency Range: 824-896 MHz
  • 1850-1990MHz
  • Average Gain: 3dB
  • Maximum power: 100W
  • Nominal impedance: 50Ω
  • Pattern: Omni Directional
  • Termination: N Female
  • Operating Temperature: -40C to 85C
  • Fully Weatherproof for Outdoor Application
  • Honeywell offers remote antennas designed to increase GSM signal transmission capability. These durable, low-profile antennas are designed to allow flexible integration with GSM communication devices.

    The GSM-ANT3dB Weatherproof Remote Antenna optimizes transmissions with field diversity technology. The versatile, weatherproof design is suitable for indoor or outdoor applications.

  • Frequency Range: 824-896 MHz
  • 1850-1990MHz
  • Average Gain: 3dB
  • Maximum power: 100W
  • Nominal impedance: 50Ω
  • Pattern: Omni Directional
  • Termination: N Female
  • Operating Temperature: -40C to 85C
  • Fully Weatherproof for Outdoor Application
  • Honeywell GSM3DB50KT  Includes GSM-ANT3DB antenna, WA7626-CA SMA to N adaptor cable, 50 ft.coax cable Honeywell GSM3DBKT  Includes GSM-ANT3DB antenna and WA7626-CA SMA to N adaptor cable

    Honeywell offers remote antennas designed to increase GSM signal transmission capability. These durable, low-profile antennas are designed to allow flexible integration with GSM communication devices.

    The GSM-ANT3dB Weatherproof Remote Antenna optimizes transmissions with field diversity technology. The versatile, weatherproof design is suitable for indoor or outdoor applications.

  • Frequency Range: 824-896 MHz
  • 1850-1990MHz
  • Average Gain: 3dB
  • Maximum power: 100W
  • Nominal impedance: 50Ω
  • Pattern: Omni Directional
  • Termination: N Female
  • Operating Temperature: -40C to 85C
  • Fully Weatherproof for Outdoor Application
  • GSM3DBKT Includes GSM-ANT3DB antenna and WA7626-CA SMA to N adaptor cable

    Honeywell offers remote antennas designed to increase GSM signal transmission capability. These durable, low-profile antennas are designed to allow flexible integration with GSM communication devices.

    The GSM-ANT3dB Weatherproof Remote Antenna optimizes transmissions with field diversity technology. The versatile, weatherproof design is suitable for indoor or outdoor applications.

  • Frequency Range: 824-896 MHz
  • 1850-1990MHz
  • Average Gain: 3dB
  • Maximum power: 100W
  • Nominal impedance: 50Ω
  • Pattern: Omni Directional
  • Termination: N Female
  • Operating Temperature: -40C to 85C
  • Fully Weatherproof for Outdoor Application
  • LUXUL WIRELESS LW-HDW-AM-OD Antenna Mounting Bracket - LUXUL WIRELESS LW-HDWAMOD LUXUL WIRELESS LW-HDWHMBP Outdoor Antenna Mounting Bracket - LUXUL WIRELESS LW-HDWHMBP
    LUXUL WIRELESS LW-HDW-AM-OD Antenna Mounting Bracket - LUXUL WIRELESS LW-HDWAMOD


    The adjustable Half Mounting Bracket is Used in conjunction with Luxul?s high gain antennas to secure the antenna in place for outdoor use.

    LUXUL WIRELESS LW-HDWHMBP Outdoor Antenna Mounting Bracket - LUXUL WIRELESS LW-HDWHMBP


    The adjustable Half Mounting Bracket is Used in conjunction with Luxul's high gain antennas to secure the antenna in place for outdoor use.

    Microtek 1MTRD 1 Meter Dish Receiver Antenna Microtek 34P 3x4" Patch Antenna
    Accessory Features:

    Weather enclosure can be painted any nonmetallic color

    Wall & Pole mount hardware included

    Multiple transmitter/receiver mounting configurations available

    LNB mounting hardware included with ML 5.8- 1000E & 2500E

    Mounting block included in weather enclosure with ML 5.8 series

    18 inch & 1 meter dish antennas for ML 5.8 series

    6 x 6 patch antenna for ML 5.8 series

    4 x 5 & 12 x 12 patch antenna for ML 2.4 series and ML Data 2400

    36 grid dish for ML 2.4 series

    41.5 yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.


    UPC:615798312343

    Accessory Features:

    Weather enclosure can be painted any nonmetallic color

    Wall & Pole mount hardware included

    Multiple transmitter/receiver mounting configurations available

    LNB mounting hardware included with ML 5.8- 1000E & 2500E

    Mounting block included in weather enclosure with ML 5.8 series

    18 inch & 1 meter dish antennas for ML 5.8 series

    6 x 6 patch antenna for ML 5.8 series

    4 x 5 & 12 x 12 patch antenna for ML 2.4 series and ML Data 2400

    36 grid dish for ML 2.4 series

    41.5 yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.


    UPC:671892000302

    Microtek 3DGH 3' Grid Disk Antenna Microtek DATADPL Dipole Antenna, 1/2" Wave used with Minilink ML Data 900 Systems
    Accessory Features:

    Weather enclosure can be painted any nonmetallic color

    Wall & Pole mount hardware included

    Multiple transmitter/receiver mounting configurations available

    LNB mounting hardware included with ML 5.8- 1000E & 2500E

    Mounting block included in weather enclosure with ML 5.8 series

    18 inch & 1 meter dish antennas for ML 5.8 series

    6 x 6 patch antenna for ML 5.8 series

    4 x 5 & 12 x 12 patch antenna for ML 2.4 series and ML Data 2400

    36 grid dish for ML 2.4 series

    41.5 yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.


    UPC:671892001903

    Accessory Features:

    Weather enclosure can be painted any nonmetallic color

    Wall & Pole mount hardware included

    Multiple transmitter/receiver mounting configurations available

    LNB mounting hardware included with ML 5.8- 1000E & 2500E

    Mounting block included in weather enclosure with ML 5.8 series

    18 inch & 1 meter dish antennas for ML 5.8 series

    6 x 6 patch antenna for ML 5.8 series

    4 x 5 & 12 x 12 patch antenna for ML 2.4 series and ML Data 2400

    36 grid dish for ML 2.4 series

    41.5 yagi antennas for ML Data 900 series


    MiniLink weather enclosures can be pole or wallmounted, are large enough to accommodate combinations of transmitters and antennas and come with all necessary mounting hardware. In addition, they can be painted any non-metallic color to blend into the surroundings.

    A variety of transmit and receive antennas are available depending on the range and type of system being designed. Review the distance specifications chart for available configurations.

    All MiniLink Transmitters, Receivers and Transceivers must be mounted in an environmental enclosure if used outdoors or in an area susceptible to water and/or dust.

    MiniLink antennas and LNBs are weather proof and do not need to be mounted in an enclosure.

       
     
    Outdoor Antennas for Burglar Alarm Systems
     
     

    Enter your email for a chance to WIN $100 Amex Gift Card.

    Please Enter Your Email Address

    *One entry per household please