|
|
|
|
|
|
|
|
|
Features: Compatible with control panels with serial number capabilities for multiplex polling loop Rugged aluminum housing and adjustable L bracket type magnet Standard gap: 2" (51mm) 24" (61cm) armored cable Epoxy sealed for protection from heat, moisture and impact Programmed from VISTA keypad or learn mode
Specifications: Switch Type: Form A (SPST) Reed Contact Rating: 100ma @ 28VDC
|
Features: Rugged cast aluminum housing for protecting magnet Armored cable standard on every model (18") Standard gap: 1" (25mm) minimum Unobtrusive design resists damage in high traffic areas SPST Closed Circuit--Circuit is closed with magnet engaged Specifications: Switch Type: Form A (SPST) Reed Contact Rating: 100ma @ 28VDC Color: Aluminum
|
|
|
|
|
|
|
|
|
|
|
|
|
Features: Rugged cast aluminum housing for protecting magnet Armored cable standard on every model (18") Wide Gap (2") Extra large magnet to increase gap to over 2.0". SPST contacts Unobtrusive design resists damage in high traffic areas SPST Closed Circuit - Circuit is closed with magnet engaged Specifications: Switch Type: Form A (SPST) Reed Contact Rating: 100ma @ 28VDC Color: Aluminum
|
Features: Adjustable magnet with L bracket for fast installation 24" armored cable is standard Standard gap: 23/8" (60mm) minimum Epoxy sealed for protection from moisture and impact Rugged "Shock absorber" design protects reed against flex or damage to housing Specifications: Switch Type: Form A (SPST) Reed Contact Rating: 100ma @ 28VDC
|
|
|
|
|
|
|
|
|
|
|
|
|
Features: Adjustable magnet with L bracket for fast installation 24" armored cable is standard Standard gap: 23/8" (60mm) minimum Epoxy sealed for protection from moisture and impact Rugged "Shock absorber" design protects reed against flex or damage to housing Single pole double throw contacts for closed or open circuit (Form C Switch) Specifications: Switch Type: Form C (SPDT) Reed Contact Rating: 100ma @ 28VDC
|
Features: XTP contacts withstand surges up to 2400 volts DC The new standard of OHD contact applications Adjustable magnet with L bracket Standard gap: 2" (51mm) Soft cure epoxy protects contact from moisture as well as damage from impact and offers unequalled protection from temperature extremes The unique "double case" design incorporates a transient protected, epoxy sealed inner case buffered by a rugged aluminum outer case to ensure reliability even when outer case is damaged or flexed Specifications: Switch Type: Form A (SPST) Reed Contact Rating: 100ma @ 28VDC
|
|
|
|
|
|
|
|
|
|
|
|
Model DC-481 I provides an effective and convenient means to secure panel type roll up doors which incorporate a roller track transport mechanism. The inclusion of an adjustable L-bracket allows fitting to roller tracks up to 3m wide. For the highest level of security, mount the switch below any other devices installed the track while still high enough to keep the cabling off the floor surface.
Specifications
Gap
Make: 2.75in / 70mm (+/- 20%)
Break: 4.0in / 102mm (+/- 20%)
Connections:
24in, 22 guage wire
enclosed in steel
armoured cable.
Operating Temperature:
-40F 165F / -40CC 65CC
Construction:
Molded aluminum
Dimensions:
Switch
L- 2.76in / 70mm
W-1 .80in / 69mm
D- 2.47in / 95mm
Magnet
L- 3.S0in / 90mm
W-3.25n / 82mm
D- 1.7in / 43mm
Electrical:
Circuit Type: NC / Dry Contact
Max Ratings:
Voltage: 250VDC/vac Current: 500mA
Watts: l0W
|
4 1/8"L x 1 1/2”W x 3/8”H / BRACKET-51/4”L x 2”x 2”
ARMORED MAGNET w/ ADJUSTABLE BRACKET
|
|
|
|
|
|
|
|
|
|
|
|
|
The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch. The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet. 200 Series Standard Features time Warranty UL and ULC approved Gap: min. 3/8", max 3" Available in closed loop, open loop and SPDT Extruded aluminum switch 36" stainless steel armored cable Floor or wall mount adaptable Magnet bracket included Supervisory loops available Switch, magnet and hardware are available separately
|
The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch. The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet. 200 Series Standard Features time Warranty UL and ULC approved Gap: min. 3/8", max 3" Available in closed loop, open loop and SPDT Extruded aluminum switch 36" stainless steel armored cable Floor or wall mount adaptable Magnet bracket included Supervisory loops available Switch, magnet and hardware are available separately
|
|
|
|
|
|
|
|
|
|
|
|
|
The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch. The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet. 200 Series Standard Features time Warranty UL and ULC approved Gap: min. 3/8", max 3" Available in closed loop, open loop and SPDT Extruded aluminum switch 36" stainless steel armored cable Floor or wall mount adaptable Magnet bracket included Supervisory loops available Switch, magnet and hardware are available separately
|
The GRI 200 Series is referenced and produced as an industrial grade floor mount switch. Primarily used for the protection of overhead doors where the operation of heavy motorized traffic would make it impossible to use any type of plastic encapsulated switch. The 200 housing is extruded from 6063 T5 aluminum material and tested to withstand a crushing force of 20,000 pounds or 10 tons without harming the delicate reed switch. All mounting hardware including lead anchors are provided as well as a mounting bracket for the actuating magnet. 200 Series Standard Features time Warranty UL and ULC approved Gap: min. 3/8", max 3" Available in closed loop, open loop and SPDT Extruded aluminum switch 36" stainless steel armored cable Floor or wall mount adaptable Magnet bracket included Supervisory loops available Switch, magnet and hardware are available separately
|
|
|
