You are here: Home > Burglar Alarms / Intrusion >

Sensors for Burglar Alarm Systems

 >

PIRs & Motion Sensors for Burglar Alarm Systems

 >

PIR Sensor Accessory Lens for Burglar Alarm Systems
We found 72 results matching your criteria.
Burglar alarms can achieve an extensive number of applications through the use of different PIR accessory lenses. The right lens can extend the viewing range of a sensor, or widen its field of view. These capabilities are leveraged to create outdoor alarm systems, reduce false alarms due to pets, achieve total room coverage, and other functions.
Sort By:
Page of 6
Ademco / Honeywell 199-PA - Pet Alley Lens For 1990 & 1992 PIRs - 199PA Ademco 995LR - Long Range Lens for 995 PIR Motion Detector
Features:
  • Description: Pet Alley Lens
  • Coverage:
    - 1990: 60' x 90' (18M x 27M)
    - 1992: 50' x 70' (15M x 21.3M)
  • Pulse Count Setting: 2-3*
  • Recommended Mounting: 3-3.5 (0.9M-1.1M)
  • Pattern Setting Deg.: +2º(D) 0º(Q)
  • Correction (in°) per Ft If not mounted at Recommended Height (Pattern Up or Down):
    - Higher: Down 1º/ft (1º/30cm)
    - Lower: Up 1º/ft (1º/30cm)

    * The 3-event pulse count setting provides maximum protection against false alarms caused by environmental disturbances. It may be programmed for wide angle lens applications only when range of the protected area is no greater than 30 ft (approx. 9m).
  • Long range lens
  • 70 ft. x 8.5 ft. coverage
    • Ademco 995PA - Pet Alley Lens for 995 PIR Motion Detector Bosch / Detection Systems BUB-ENVPIR - ENVIORNMENTAL BUBBLE KIT, WHITE, TINTED RUGGED VSN
  • Pet alley lens
  • 40 ft. x 50 ft. coverage

    • Rugged Bubble (Option)



    • Rugged Bubbles are made from 3 mm thick Polycarbonate, designed to meet stringent strength standards without compromising optical clarity.
    • The Bubble, by itself, can withstand a 100 footpound impact. This energy is equivalent to that of a 10 lb sledgehammer dropped from a height of 10 feet.
    • The Bubble, installed in the Dome, exceeds the UL 1598 horizontal impact standard for lighting fixtures by a factor of 10.
    Bosch ISC-PPR1-W16 Professional Series PIR Detector Bosch ISC-PPR1-WA16 Professional Series PIR Detector, with multi-point anti-mask technology with integrated spray detection
    The Professional Series PIR Detector ISC-PPR1-W16 is exceptionally suited for commercial indoor applications. The self-locking two-piece enclosure, built-in bubble level, flexible mounting height, and three optional mounting brackets simplify installation and reduce service time. Sensor data fusion technology ensures that the detector sends alarm conditions based on precise information. Tri-focus optics technology eliminates coverage gaps and responds efficiently to intruders. The powerful combination of unique features in the Professional Series delivers superior catch performance and virtually eliminates false alarms.

    Features:
  • 16 m x 21 m (50 ft x 70 ft) coverage, field selectable to 7.5 m x 10 m (25 ft x 33 ft)
  • Sensor data fusion technology
  • 2.1 m to 3 m (7 ft to 10 ft) mounting height, no adjustments required
  • Tri-focus optics technology
  • Active white light suppression
  • Dynamic temperature compensation
  • Remote walk test
  • Alarm memory
  • Draft and insect immunity

    Specifications
  • Color: White
  • Dimensions: 127 mm x 69 mm x 58 mm (5 in. x 2.75 in. x 2.25 in.)
  • Material: High-impact ABS plastic
  • Relative Humidity: 0 to 95%, non-condensing
  • Temperature (Operating and Storage): -29°C to +55°C (-20°F to +130°F) For UL Certificated installations, 0°C to +49°C (+32°F to +120°F)
  • Environmental Class II IP Rating: IP 41, IK02 (EN60529, EN50102)
  • Alarm Indicator: Blue LED
  • Zones: 89
  • Outputs: Relay Solid state relay, normally-closed (NC) contacts, power supervised. 3 W, 125 mA, 25 VDC, resistance < 10 ohm
  • Tamper: Normally-closed (NC) contacts (with cover on) rated at 25 VDC, 125 mA maximum. Connect tamper circuit to 24-hour protection circuit.
  • Power Requirements:
    - Voltage (Operating): 9 VDC to 15 VDC
    - Current (Maximum): < 15 mA
    - Current (Standby): < 10 mA at 12 VDC
    		• with multi-point anti-mask technology with integrated spray detection
    The Professional Series PIR Detector ISC-PPR1-W16 is exceptionally suited for commercial indoor applications. The self-locking two-piece enclosure, built-in bubble level, flexible mounting height, and three optional mounting brackets simplify installation and reduce service time. Sensor data fusion technology ensures that the detector sends alarm conditions based on precise information. Tri-focus optics technology eliminates coverage gaps and responds efficiently to intruders. The powerful combination of unique features in the Professional Series delivers superior catch performance and virtually eliminates false alarms.

    Features:
  • 16 m x 21 m (50 ft x 70 ft) coverage, field selectable to 7.5 m x 10 m (25 ft x 33 ft)
  • Sensor data fusion technology
  • 2.1 m to 3 m (7 ft to 10 ft) mounting height, no adjustments required
  • Tri-focus optics technology
  • Active white light suppression
  • Dynamic temperature compensation
  • Remote walk test
  • Alarm memory
  • Draft and insect immunity

    Specifications
  • Color: White
  • Dimensions: 127 mm x 69 mm x 58 mm (5 in. x 2.75 in. x 2.25 in.)
  • Material: High-impact ABS plastic
  • Relative Humidity: 0 to 95%, non-condensing
  • Temperature (Operating and Storage): -29°C to +55°C (-20°F to +130°F) For UL Certificated installations, 0°C to +49°C (+32°F to +120°F)
  • Environmental Class II IP Rating: IP 41, IK02 (EN60529, EN50102)
  • Alarm Indicator: Blue LED
  • Zones: 89
  • Outputs: Relay Solid state relay, normally-closed (NC) contacts, power supervised. 3 W, 125 mA, 25 VDC, resistance < 10 ohm
  • Tamper: Normally-closed (NC) contacts (with cover on) rated at 25 VDC, 125 mA maximum. Connect tamper circuit to 24-hour protection circuit.
  • Power Requirements:
    - Voltage (Operating): 9 VDC to 15 VDC
    - Current (Maximum): < 15 mA
    - Current (Standby): < 10 mA at 12 VDC
    • Caddx 60-737 - SWIVEL MOUNT KIT FOR INTERIOR PIR Caddx NX-6-FP-4-LM - NX-6 Panel, NX-1308E LED Keypad, 16.5VAC, 40VA Transformer, 12V 4AH Backup Battery, 15 Watt Interior Speaker, RJ Block and Cord. Motion Sensor Not Included.
    For mounting interior PIR's on a swivel mount, instead of directly to wall. Description

    With available add-on modules to accommodate enhancements such as wireless integration, X-10 home automation, two-way voice, and cellemetry backup, the NX-6 provides flexible expansion capabilities for mid-size installations.

    Features and Benefits
    • 6 fully programmable zones
    • Zone doubling to 12 zones option
    • Wireless expansion up to 16 zones
    • All zones programmable as fire or burglary
    • 2 true partitions
    • Up/downloadable with competitor lockout
    • Modular design with slide in PC boards
    • 4 on-board outputs (47 events programmable by partition)
    • Maximum 8 keypads per partition
    • 2-wire or 4-wire smoke detectors
    • Automatic arming with auto retry
    • Assign zones to one or multiple partitions
    • 40 user codes (4 or 6 digit)
    • Built-in siren driver/voltage out
    • Siren supervision

    Communication

    • SIA and Contact ID formats
    • Supports all major formats
    • Event activated pager format
    • Flexible auto-test reports
    • Failure to communicate reporting
    • Reports entering/exiting program mode
    • Will communicate alarm events during programming

    185 Event Log

    • Includes date,time,event and partition number
      Overview
      The NX-6 is a full-featured, mid-sized security system that uses advanced technology for burglary, fire and environmental detection.The NX-6 is a flexible security system that is easy to install and simple to use.With two partitions and up to sixteen zones, the NX-6 can handle most medium size residential and commercial security needs.

      High Standards
      The panel comes standard with six hardwire zone inputs. Four programmable outputs can be set up to activate external devices during an alarm or other system event.The Modular design allows for complete integration of multiple systems within one enclosure. Adding more zones or expanding capability is fast and easy.

      Easy Expansion
      Expand the NX-6 capabilities by adding up to three optional Expander Modules. Modular design allows NetworX modules to slide into the enclosure easily for quick installations. The NX-320E Smart Power Supply and Bus Extender, the NX-508E Output Module and the NX-534E Two-Way Voice Module are just a few of the flexible options for the NX-6. Expand the system even further with a phone interface/voice module for on-site and off-site system control using touchtone phones.

      Effortless Programming
      Conduct quick and easy on-site programming with alphanumeric keypads and a menu driven text interface. Off-site programming is also available with the DL-900 software for Windows.

      Specifications
      Operating power16.5VAC 40VA
      Auxiliary power
         w/40VA or 50VA transformer1 Amps
         w/NX-320E power supply3 Amps*
      Loop resistance
         For standard loop300 Ohms Maximum
         For 2-wire smokes30 Ohms Maximum
      Built-in siren driver2 Tone (Temporal & Yelp)
      Alarm current available
      (if above driver is not used)      		2.5 Amps
      Loop response500ms
      Operating temperature32F to 120 °F (0 to 49 °C)
      LCD keypad dimensions6.4"W 4.0"H 1.1" D
      LED keypad dimensions6.4"W 5.3"H 1.0" D
      Keypad materialWhite / ABS
      Enclosure dimensions9.25"W 8.25"H 3.5" D
      Enclosure colorOff White
      Shipping weight (Panel Only)8 lbs
      *When using the NX-320E (w/50VA transformer) rated at 2 Amps and NX-8 (w/40VA or 50VA transformer)rated at 1 Amp, the combined available power is 3 Amps.

      Ordering Information
      Part NumberDescription
      NX-68-zone control only. Keypad and transformer sold separately.
      NX-6-KIT8-zone control with NX-108E keypad and transformer.
      NX-108E8-zone LED keypad.
      NX-1316E16-zone LED keypad with removable door.
      NX-1448E48-zone fixed display LCD keypad.
      NX-148E48-zone custom display LCD keypad with removable door.
      NX-408E/416E8, 16-zone wireless expander receivers.
      Caddx NX-6-FP-4-LM-LX - NX6FASTPK, WITH NO MOTION SENSOR OR TRANSFORMER Caddx NX-6-FP-7 - NX-6 Fastpack w/NX-148E Keypad Includes NX-6 Panel, NX-148E LCD Keypad, Hardwire Pet-Immune Motion Sensor, 16.5VAC, 40VA Transformer, 12V 4AH Backup Battery, 15 Watt Interior Speaker, RJ Block and Cord.
      Description

      With available add-on modules to accommodate enhancements such as wireless integration, X-10 home automation, two-way voice, and cellemetry backup, the NX-6 provides flexible expansion capabilities for mid-size installations.

      Features and Benefits
      • 6 fully programmable zones
      • Zone doubling to 12 zones option
      • Wireless expansion up to 16 zones
      • All zones programmable as fire or burglary
      • 2 true partitions
      • Up/downloadable with competitor lockout
      • Modular design with slide in PC boards
      • 4 on-board outputs (47 events programmable by partition)
      • Maximum 8 keypads per partition
      • 2-wire or 4-wire smoke detectors
      • Automatic arming with auto retry
      • Assign zones to one or multiple partitions
      • 40 user codes (4 or 6 digit)
      • Built-in siren driver/voltage out
      • Siren supervision

      Communication

      • SIA and Contact ID formats
      • Supports all major formats
      • Event activated pager format
      • Flexible auto-test reports
      • Failure to communicate reporting
      • Reports entering/exiting program mode
      • Will communicate alarm events during programming

      185 Event Log

      • Includes date,time,event and partition number
        Overview
        The NX-6 is a full-featured, mid-sized security system that uses advanced technology for burglary, fire and environmental detection.The NX-6 is a flexible security system that is easy to install and simple to use.With two partitions and up to sixteen zones, the NX-6 can handle most medium size residential and commercial security needs.

        High Standards
        The panel comes standard with six hardwire zone inputs. Four programmable outputs can be set up to activate external devices during an alarm or other system event.The Modular design allows for complete integration of multiple systems within one enclosure. Adding more zones or expanding capability is fast and easy.

        Easy Expansion
        Expand the NX-6 capabilities by adding up to three optional Expander Modules. Modular design allows NetworX modules to slide into the enclosure easily for quick installations. The NX-320E Smart Power Supply and Bus Extender, the NX-508E Output Module and the NX-534E Two-Way Voice Module are just a few of the flexible options for the NX-6. Expand the system even further with a phone interface/voice module for on-site and off-site system control using touchtone phones.

        Effortless Programming
        Conduct quick and easy on-site programming with alphanumeric keypads and a menu driven text interface. Off-site programming is also available with the DL-900 software for Windows.

        Specifications
        Operating power16.5VAC 40VA
        Auxiliary power
           w/40VA or 50VA transformer1 Amps
           w/NX-320E power supply3 Amps*
        Loop resistance
           For standard loop300 Ohms Maximum
           For 2-wire smokes30 Ohms Maximum
        Built-in siren driver2 Tone (Temporal & Yelp)
        Alarm current available
        (if above driver is not used)        		2.5 Amps
        Loop response500ms
        Operating temperature32F to 120 °F (0 to 49 °C)
        LCD keypad dimensions6.4"W 4.0"H 1.1" D
        LED keypad dimensions6.4"W 5.3"H 1.0" D
        Keypad materialWhite / ABS
        Enclosure dimensions9.25"W 8.25"H 3.5" D
        Enclosure colorOff White
        Shipping weight (Panel Only)8 lbs
        *When using the NX-320E (w/50VA transformer) rated at 2 Amps and NX-8 (w/40VA or 50VA transformer)rated at 1 Amp, the combined available power is 3 Amps.

        Ordering Information
        Part NumberDescription
        NX-68-zone control only. Keypad and transformer sold separately.
        NX-6-KIT8-zone control with NX-108E keypad and transformer.
        NX-108E8-zone LED keypad.
        NX-1316E16-zone LED keypad with removable door.
        NX-1448E48-zone fixed display LCD keypad.
        NX-148E48-zone custom display LCD keypad with removable door.
        NX-408E/416E8, 16-zone wireless expander receivers.
        		 Description

        With available add-on modules to accommodate enhancements such as wireless integration, X-10 home automation, two-way voice, and cellemetry backup, the NX-6 provides flexible expansion capabilities for mid-size installations.

        Features and Benefits
        • 6 fully programmable zones
        • Zone doubling to 12 zones option
        • Wireless expansion up to 16 zones
        • All zones programmable as fire or burglary
        • 2 true partitions
        • Up/downloadable with competitor lockout
        • Modular design with slide in PC boards
        • 4 on-board outputs (47 events programmable by partition)
        • Maximum 8 keypads per partition
        • 2-wire or 4-wire smoke detectors
        • Automatic arming with auto retry
        • Assign zones to one or multiple partitions
        • 40 user codes (4 or 6 digit)
        • Built-in siren driver/voltage out
        • Siren supervision

        Communication

        • SIA and Contact ID formats
        • Supports all major formats
        • Event activated pager format
        • Flexible auto-test reports
        • Failure to communicate reporting
        • Reports entering/exiting program mode
        • Will communicate alarm events during programming

        185 Event Log

        • Includes date,time,event and partition number
          Overview
          The NX-6 is a full-featured, mid-sized security system that uses advanced technology for burglary, fire and environmental detection.The NX-6 is a flexible security system that is easy to install and simple to use.With two partitions and up to sixteen zones, the NX-6 can handle most medium size residential and commercial security needs.

          High Standards
          The panel comes standard with six hardwire zone inputs. Four programmable outputs can be set up to activate external devices during an alarm or other system event.The Modular design allows for complete integration of multiple systems within one enclosure. Adding more zones or expanding capability is fast and easy.

          Easy Expansion
          Expand the NX-6 capabilities by adding up to three optional Expander Modules. Modular design allows NetworX modules to slide into the enclosure easily for quick installations. The NX-320E Smart Power Supply and Bus Extender, the NX-508E Output Module and the NX-534E Two-Way Voice Module are just a few of the flexible options for the NX-6. Expand the system even further with a phone interface/voice module for on-site and off-site system control using touchtone phones.

          Effortless Programming
          Conduct quick and easy on-site programming with alphanumeric keypads and a menu driven text interface. Off-site programming is also available with the DL-900 software for Windows.

          Specifications
          Operating power16.5VAC 40VA
          Auxiliary power
             w/40VA or 50VA transformer1 Amps
             w/NX-320E power supply3 Amps*
          Loop resistance
             For standard loop300 Ohms Maximum
             For 2-wire smokes30 Ohms Maximum
          Built-in siren driver2 Tone (Temporal & Yelp)
          Alarm current available
          (if above driver is not used)          		2.5 Amps
          Loop response500ms
          Operating temperature32F to 120 °F (0 to 49 °C)
          LCD keypad dimensions6.4"W 4.0"H 1.1" D
          LED keypad dimensions6.4"W 5.3"H 1.0" D
          Keypad materialWhite / ABS
          Enclosure dimensions9.25"W 8.25"H 3.5" D
          Enclosure colorOff White
          Shipping weight (Panel Only)8 lbs
          *When using the NX-320E (w/50VA transformer) rated at 2 Amps and NX-8 (w/40VA or 50VA transformer)rated at 1 Amp, the combined available power is 3 Amps.

          Ordering Information
          Part NumberDescription
          NX-68-zone control only. Keypad and transformer sold separately.
          NX-6-KIT8-zone control with NX-108E keypad and transformer.
          NX-108E8-zone LED keypad.
          NX-1316E16-zone LED keypad with removable door.
          NX-1448E48-zone fixed display LCD keypad.
          NX-148E48-zone custom display LCD keypad with removable door.
          NX-408E/416E8, 16-zone wireless expander receivers.
          Caddx NX-8E-FP-7-LM - NX-8E Fastpack With NX-148E Keypad, Less Motion Sensor Caddx NX-8E-FP-7-RF - NX-8E Fastpack with NX-148E-RF LCD Keypad, T-0001 Transformer,Pi6000 PIR, B-1245 Battery, 5-0001 Speaker, RJ Block & Cord.
          Our best full-featured commercial and residential security system, The NetworX NX-8E uses advanced technology for burglary, fire and environmental detection. The NX-8E is a flexible security system that is easy to install and simple to use.

          Standard Features


          • Expandable to 192 fully programmable hardwire and/or wireless zones
          • 240 user codes
          • 512-event history log that provides date, time, event, partition and user number
          • Up to 8 true partitions with separate account codes, entry/exit delays for each partition
            •
          		Only from Caddx, the "installer-friendly" X-Pand-A-Can design allows for the first time, complete integration of multiple systems modules within one enclosure.

          Features:

          • Expandable to 48 fully programmable zones
          • All zones programmable as fire or burglary
          • Maximum 24 keypads
          • Wireless expansion up to 48 zones
          • Up/downloadable with competitor lockout
          • Modular design with slide in PC boards
          • 4 on-board outputs (47 events programmable by partition)
          • Maximum 8 keypads per partition
          • 2-wire or 4-wire smoke detectors
          • Assign zones to one or multiple partitions
          • 99 four digit or 66 six digit user codes
          • Built-in siren driver/voltage out

          Partitions:

        • Up to 8 true partitions
        • Separate account code for each partition
        • User code assignment to multiple partitions
        • Separate feature selections for each partition
        • Independent entry/exit delays for each partition

          185 Event Log:

          • Includes date, time, event and partition number

          Communication:

          • SIA and contact ID formats
          • Supports all major formats
          • Event activated pager format
          • Flexible auto-test reports
          • Failure to communicate reporting
          • Reports entering/exiting program mode
          • Will communicate alarm events during programming
          Hardwire Zone Expansion:
          • The NX-8 is expandable to 16 zones by zone doubling, or 48 zones with expander modules
          • NX-216 -16 zone expansion module
          • Can mount up to 2,500' from control
          • Box tamper input
          • Separate auxiliary power supervision
         
       
      PIR Sensor Accessory Lens for Burglar Alarm Systems