Home > Shop Brands > Pelco >

  Pelco CT82011MSTR1 Multimode Ethernet Media Converter Transmitter with Conformal Coating

Pelco CT82011MSTR1 Multimode Ethernet Media Converter Transmitter with Conformal Coating


Our Price : $598.68

UPC Code: 700880217559

Product Code: CT82011MSTR1

Call for availability

The CT82011 media converter converts 10Base-T/100Base-TX Ethernet data to 100Base-FX Ethernet data and vice versa. Designed for point-to-point applications, the CT82011 media converter provides one 10Base-T/100Base-TX port and one 100Base-FX fiber port. The CT82011 media converters are used in combination with one another to provide wavelength compatibility.

The 100Base-FX fiber port is automatically forced to full-duplex 100 Mbps operation. Networking functions for the 10Base-T/100Base-TX port (RJ-45 twisted-pair copper port) are user selectable by means of a rotary switch. Auto-negotiation allows the port to automatically negotiate between 10 Mbps and 100 Mbps data rates and between full-duplex and half-duplex modes. If auto-negotiation is not desired, the port can be forced to specific modes of operation: 10 Mbps or 100 Mbps data rate, half-duplex or full-duplex mode, and the enabling/disabling of flow control.
  • Ethernet Media Converter: One 10BASE-T/100BASE-TX Port, One 100BASE-FX Port
  • Converts 10BASE-T/100BASE-TX Ethernet Data to 100BASE-FX Ethernet Data and Vice Versa
  • Integrated Wavelength Division Multiplexing (WDM) in a Single Fiber
  • Designed for Point-to-Point Applications
  • User-Selectable 10BASE-T/100BASE-TX Port Functions: Autonegotiation Between 10 Mbps and 100 Mbps Data Rates and Between Full-Duplex and Half-Duplex Modes, 10 Mbps or 100 Mbps Selectable, Full-Duplex or Half-Duplex Mode Selectable, Enabling/Disabling of Flow Control
  • Auto MDI/MDI-X (Medium Dependent Interface/Medium Dependent Interface Crossover) Operation
  • Link-Down Detection
  • Compliant with IEEE 802.3, 802.3u, and 802.3x Standards
  • Multimode Fiber Support for Distances up to 2 km
  • Single-Mode Fiber Support for Distances up to 46 km
  • Laser Diode for Transmission of Optical Signals
  • Environmentally Hardened
  • Designed to Meet NEMA TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
  • No Performance Adjustments Required
  • 12 VDC or 24 VAC Power Supply
  • Stand-Alone and Rack-Mountable Modular Design
  • LED Indicators for Monitoring of Optic Signal/Laser Status, 100BASE-FX Port Status Including Far End Fault Indication (FEFI), 10BASE-T/100BASE-TX Port Status, and Operating Power

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please