The DVR5100 is the ?rst product from Pelco to be Endura Enabled. Endura Enabled means the product delivers features and bene?ts from the Endura digital video surveillance platform for stand-alone operation. Further, it denotes the ability of the product to work in an Endura system. The DVR5100 digital video recorder leverages Endura chnologies to deliver superior recording performance and video quality along with intuitive, easy operation. The DVR5100 captures unparalleled video quality at CIF, 2CIF, and 4CIF resolution at up to 480/400 (NTSC/PAL) images per second (ips). The DVR5100 can be integrated with an Endura network with a future software release.
The DVR5100's remarkable performance is enhanced by the use of EnduraStor storage optimization technology. EnduraStor allows video recorded at higher frame rates to be automatically reduced to a lower frame rate after a precon?gured period of time, saving valuable hard disk drive space. Further, the use of new recording frame rate and resolution options, in conjunction with EnduraStor, provides the bene?t of having 30/25 ips video available for the duration of the EnduraStor delay period, while still meeting video retention targets achievable with time lapse recording. EnduraStor, combined with built-in video motion detection capabilities and programmable recording schedules, allows the user to harness the performance of the DVR5100 while optimizing the required storage capacity and cost.
The included USB keyboard and mouse can be connected to the DVR5100's USB ports to con?gure settings quickly and easily, saving valuable time and expense in installing and programming the DVR. Convenient front panel controls with integrated joystick, jog, and shuttle, combined with an intuitive and simple icon-based user interface (UI), make using the DVR effortless. For users that prefer to operate the DVR from a USB keyboard, the supplied keyboard template calls attention to the convenient hot keys available for operation. The DVR5100 provides integrated operation of Pelco pan/tilt/zoom (PTZ) cameras through Coaxitron, Pelco D, or Pelco P protocols. An innovative single-button export feature simpli?es the exporting of video.
Flexible viewing options allow users to optimize the DVR for their particular application requirements. Video can be displayed on VGA, NTSC/PAL composite, or S-Video monitors. The main monitor can display one, four, nine, or sixteen images. Users can independently view live and playback video on the same screen. In addition, a programmable spot monitor provides a live sequencing display on a composite monitor for use as either a call monitor or public view display.
The DVR5100 uses internet protocol-based networking for remote accessibility and control of the DVR. All connections are made over a secure VPN session. Bandwidth throttling is supported on a perconnection basis, enabling up to ?ve users to optimize their experience with the DVR5100 based on their available network bandwidth.
The powerful remote client offers the ability to view and control all cameras from one DVR5100 using a convenient drag and drop approach. Video can be searched based on time, date, camera, motion, and events and designated clips can be exported to the remote PC. The DVR5100 can be fully administered from the remote client. Further, the remote client can be utilized for more sophisticated con?guration options. For example, users can group multiple alarms and motion triggers into Events which can be effective in eliminating false alarms. Finally, the remote client can be used to create scripts to orchestrate the DVR's response to alarm, event, or user triggers.
Optimized to capture high quality video with a maximum recording speed of 480/400 images (NTSC/PAL) at CIF, 2CIF, and 4CIF resolution, the DVR5100 shatters previous performance marks for mainstream DVRs. The combination of enterprise class recording capabilities, ample internal storage, remote accessibility, and the reliability and assurance found in Pelco products makes this the ideal DVR for mainstream video surveillance applications.
Operating System: Linux
User Interface: Semitransparent on-screen icon-based overlays
Input: NTSC/PAL composite
Output: NTSC/PAL S-Video, composite VGA (1024 x 768) 60 Hz capability for NTSC 75 Hz capability for PAL
Video Encoding: MPEG-4
Video Inputs: 4/8/16
Format: 4CIF, 2CIF, CIF
NTSC: 704 x 480, 704 x 240, 352 x 240
PAL: 704 x 576, 704 x 288, 352 x 288
Video Inputs/Connectors: 4/8/16, BNC, looping, 75 ohms, 0.5-1 Vp-p
Video Termination: Hi-Z, 75 ohms, software controlled
Video Display Speed (Main Monitor): Up to 180 CIF resolution ips. Video recorded at slower frame rates will display at the slower frame rate in live display.
Video Display Modes (Main Monitor): Full screen, 2 x 2, 3 x 3, and 4 x 4
Video Display Speed (Sequence Monitor): 30 ips
Video Display Modes (Sequence Monitor): Full screen
Video Outputs: 1 BNC, NTSC/PAL, 75 ohms, 1 Vp-p, 1 S-Video, NTSC/PAL, 1 VGA, 1 BNC, NTSC/PAL Spot Monitor
Audio Decoding: G.711 speech codec
Audio Bit Rate: 64 kbps
Input: Line-level input
Output: Line-level output
Audio Connectors: 3.5 mm monaural jacks:
Audio Inputs: 2 for 4- and 8-channel models; 4 for 16-channel models
Audio Outputs: 1
PTZ Interface: Front panel, USB keyboard, KBD5000, or through remote client
PTZ Protocols: Pelco D, Pelco P, and Coaxitron
Alarm Inputs: 1 per camera, programmable, 5.0 VDC, 10 kohms, triggered, supervised/unsupervised
4 or 8 channels: 2 relays, N.O./N.C., form-C relay, 30 VDC, 1 A
16 channels: 4 relays, N.O./N.C., form-C relay, 30 VDC,1 A
Interface: Ethernet RJ-45 port (1000BaseT to 10/100/1000 Mbps)
USB 2.0: 1 high-speed USB 2.0 port on the front panel, 2 high-speed USB 2.0 ports on the rear panel
RS-422: 1 RS-422 port, programmable baud rate up to 19200
Front Panel Indicators/Functions:
HDD Activity: Yellow
Network Activity: Green
Network Status: Green, amber, red
Unit Status: Green, amber, red
Buttons: Con?guration/reset Power
Power Input: 100-240 VAC, 50/60 Hz, autoranging
Power Supply: Internal
Power Consumption: 136 W, 465 BTU/H (maximum)
USA Standard: 117 VAC, 3 prongs, 6 ft or 1.8 m
European Standard: 220 VAC, 3 prongs, molded connector, 6 ft or 1.8 m
UK Standard: 250 VAC, 3 prongs, molded connector, 6 ft or 1.8 m
Operating Temperature: 50° to 95°F (10° to 35°C)
Storage Temperature: -40° to 149°F (-40° to 65°C)
Operating Humidity: 20% to 80%, noncondensing
Maximum Humidity Gradient: 10% per hour
Operating Altitude: -50 ft to 10,000 ft (-16 m to 3,048 m)
Operating Vibration: 0.25G at 3 Hz to 200 Hz at a sweep rate of 0.5 octave/minimum
Construction: Steel cabinet
Finish: Front panel: gray metallic with black end caps Chassis: black matte ?nish
Dimensions: 17.0" D x 17.1" W x 3.5" H (43.2 x 43.4 x 8.9 cm)
Mounting: Desktop (feet) or rack, rack mount kit included 2 RU per unit
Unit Weight: 28.8 lb (13.06 kg)
Shipping Weight: 38 lb (17.24 kg)
Remote Client Specifications:
Minimum: 2.4 GHz Pentium IV
Optimum: 3.2 GHz Pentium IV
Minimum: 512 MB RAM memory
Optimum: 1 GB RAM memory
VGA Card: AGP VGA card with 128 MB RAM and DirectX 8.1 or later hardware acceleration with support for 1280 x 1024 resolution monitors
Monitor: VGA monitor with 1280 x 1024 display resolution
Operating System: Windows XP Professional, SP2 only
Power Cables: 1 USA standard, 1 European standard, 1 UK standard
Resource CD: Contains DVR5100 remote client software and manuals
Recovery DVD: Contains DVR5100 server boot image for emergency recovery
Rack Mounting Kit: 1
USB keyboard/template: Used for con?guration and operation
USB mouse: Used for con?guration only
USB keyboard and mouse make con?guration more ef?cient. USB keyboard can also be used for operation.
KBD5000: USB keyboard with joystick, jog shuttle, and keypad modules can be used for control and programming.
CE, Class B
UL Listed to Canadian safety standards
FCC, Class B
Pelco is a member of the MPEG-4 Industry Forum.
Pelco is a member of the Universal Plug and Play (UPnP) Forum.
Pelco is a member of the Universal Serial Bus (USB) Implementers Forum.
Pelco is a contributor to the International Standards for Organization/Electrotechnical Commission (ISO/IEC) Joint Technical Committee 1 (JTC1), "Information Technology," Subcommittee 29, Working Group 11.
Compliant with ISO/IEC 14496 standard (also known as MPEG-4).
Compliant with International Telecommunication Union (ITU) Recommendation G.711, "Pulse Code Modulations (PCM) of Voice Frequencies."
- 4, 8, or 16 Video Inputs
- Embedded Linux Operating System
- Record Video at up to 480/400 ips (NTSC/PAL) at CIF, 2CIF, or 4CIF Resolution, Programmable on a Per-Input Basis
- MPEG4-Based Compression Optimized for Surveillance Requirements
- Continuous, Scheduled, Motion, Alarm and/or Event Recording
- Up to 1.5 TB of Internal Storage Including EnduraStor Optimization
- DVR Operation from Front Panel Controls, USB Keyboard, KBD5000, or Remote Client
- DVR Con?guration and Programming Through Standard USB Keyboard and Mouse, Front Panel Controls, KBD5000, or Remote Client
- Operating System on Compact Flash and Engineered Hard Drive Cooling System for Enhanced Reliability
- Remote Client Application for Live Monitoring of One or More Cameras, Full Search and Playback, Remote Export of Video, and Remote Administration and Con?guration