Home > Shop Brands > Pelco >

  Pelco HD5200-500 HD Replacement for NSM 500/500

Pelco HD5200-500 HD Replacement for NSM 500/500


Our Price : $513.16

Product Code: HD5200-500


The NSM5200 has been engineered to meet these unique performance and reliability demands. Custom hardware components, to eliminate common performance choke points to a patented scheme for writing content to a disk drive, have been specifically designed to deliver sustained high throughput for recording and playback. The NSM5200 is capable of a maximum of 250 Mbps of throughput for incoming streams while delivering 32 simultaneous playback streams per storage pool. This performance is maintained whether the system is operating under normal conditions, dealing with disk drive errors, or rebuilding the RAID array.

The NSM5200 improves the total cost of ownership and energy efficiency by consolidating disparate components into a single chassis. The 250 Mbps throughput provides double the improvement over Pelco's first generation integrated recorder, allowing users to service far more data streams in one storage unit than previously possible. In addition, with the integration of the management server functionality into the storage chassis, cost and energy efficiency is optimized by eliminating the cost of additional servers and the associated heating, ventilation, and cooling costs. Finally, the use of lower power components and adaptive cooling inside the chassis manage power dissipation based on load requirements.

Reliability is enhanced through the use of redundancy at all common failure points. A CompactFlash card is used to host the operating system for higher reliability than traditional hard disk drives. To mitigate any downtime resulting from CompactFlash errors, the database is striped across the storage array. The RAID 6 storage configuration provides double parity protection of recorded data. The hard drive bay is cooled through the use of high capacity, redundant fans to ensure that the drives are kept at an optimum operating temperature. Finally, fully redundant power supplies guard against any power supply failure.


Front Panel Indicators:

Power: Blue Pelco badge
Software Status: Green, amber, red (based on diagnostics)
Ethernet Port 1: Green, red, off
Ethernet Port 2: Green, red, off
Unit Status: Green, amber, red
Hard Drive Status: Green, red


Power Input: 100 to 240 VAC, 50/60 Hz, autoranging
Power Supply: Internal, dual-redundant, hot swappable
Power Consumption: Operating Average
-100 VAC: 262 W, 2.65 A, 895 BTU/H
-115 VAC: 263 W, 2.31 A, 895 BTU/H
-220 VAC: 254 W, 1.25 A, 868 BTU/H


Operating Temperature: 10 to 35C (50 to 95F) at unit air intake
Storage Temperature: -40to 65C (-40 to 149F)
Operating Humidity: 20% to 80%, noncondensing
Max Humidity: Gradient 10% per hour
Operating Altitude: -16 to 3,048 m (-50 to 10,000 ft)
Operating Vibration: 0.25 G at 3 Hz to 200 Hz at a sweep rate of 0.5 octave/minute


Construction: Steel cabinet
-Front Panel: Gray metallic with black end caps
-Chassis: Black matte finish
Dimensions (without rails): 61.8 x 43.2 x 13.2 cm (24.3" D x 17.0" W x 5.2" H)
Unit Weight:
-Empty (without drives): 21 kg (46.4 lb)
-Loaded (with drives): 30 kg (66.8 lb)
Shipping Weight: 35 kg (77.0 lb)
Mounting Options: Rack, 3 RU per unit (rack rails and hardware are supplied)


CE, Class A; meets EN50130-4 standard requirements
FCC, Class A
UL/cUL Listed
S-Mark for Argentina
  • Recording Throughput up to 250 Mbps Meets Demanding Performance Requirements for Write-Intensive Applications
  • Hardware Designed to Eliminate Single Points of Failure, Including Redundant Fans, Power Supplies, and RAID 6 Storage for Optimum Reliability
  • Pooled Storage Management Provides Automatic Distributed Load Balancing and Active-Active Failover Within a Storage Pool to Ensure Continued Recording if Catastrophic Failure Occurs
  • Hot Standby Failover Provides Redundancy in Installations Where Storage Pooling Cannot Be Utilized.
  • Multicast Recording Support Allows for Recording of Multicast Data Streams for Restricted Bandwidth Scenarios
  • Redundant Recording Ensures Duplication of Vital Data for Mission-Critical Applications
  • Built-in EnduraStor Storage Management Increases Storage Efficiency by Grooming Recorded Streams Based on Age and Priority
  • Ability to Serve 32 Simultaneous Playback Streams Per Storage Pool
  • Performance Levels Maintained in Normal and RAID Error Conditions
  • Built-in Diagnostic Monitoring Provides Preventative Maintenance and SNMP Monitoring
  • Reduced Cost of Ownership and Increased Energy Efficiency Through Consolidation of Multiple Hardware Components into a Fully Integrated Chassis

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please