Home > Shop Brands > Pelco >

  Pelco IX30DN12 3.1 Megapixel Day/Night Camera

Pelco IX30DN12 3.1 Megapixel Day/Night Camera


 

Our Price : $1,409.00


Product Code: IX30DN12

Qty:

Description
 
The Pelco IX30DN12 Sarix Network ImagePak, with 1/3" CMOS image sensor and 2.8-12 mm varifocal lens, delivers clear images in H.264 and MJPEG formats at a resolution of 2048 x 1536. A minimum illumination of 0.03 lux and advanced low-light technology makes the camera suitable for low-light surveillance. The camera uses a removable IR cut filter to switch between color and B&W as per the changes in ambient lighting.

With wide dynamic range (60 dB), the camera corrects extreme lighting environments marked by high-contrast and harsh backlit scenes. Auto white balance adjusts the red and blue signals by taking a standard white color reference to get the most natural colors. An automatic back focus control feature makes sharp scene focus setup easy, while the video setup jack eliminates the need to use a laptop for viewing video during installation of the camera.

Power is supplied to the camera through PoE (IEEE 802.3af); hence, the camera gets power from the network itself without any extra wiring needed for auxiliary power outlets. The Sarix network camera comes with the standard Pelco Camera Sabotage behavior feature, which detects contrast changes in the field-of-view. Whenever the camera or lens is tampered with or obstructed by spray paint, cloth, or covered with a lens cap, an alarm is triggered.

A Window Blanking function blocks up to 4 areas (solid gray window) from being viewed by the operator. The IX30 Sarix Network Camera can be easily connected to Pelco IP and hybrid systems such as Endura version 2.0 or higher and Digital Sentry version 4.2 or higher. It also supports open architecture connectivity for third-party applications and an API (Application Programming Interface) for interfacing with Pelco's network cameras.

With a 4.3x zoom ratio and a focal length of 2.8-12 mm, the 13M2.8-12 varifocal lens is suitable for high precision image surveillance with megapixel and standard definition cameras. With a resolving power of up to 100 lines/mm, the lens offers optimal results when used in cameras with megapixel sensors. The lens can be adjusted to achieve the exact field-of-view and can be connected via the included standard 4-pin plug. Ideal for low-light conditions, the CS mount-type lens has a relative aperture size between f/1.4 and f/2.7, which allows it to perform across a wide range of lighting conditions. The aspherical elements reduce the level of distortion to produce sharpness at the image borders. It has a special coating that prevents light reflection.

Specifications:

Sensor: 1/3" progressive scan CMOS
Maximum Resolution: 2048 x 1536
Signal to Noise Ratio: 50dB
Iris Auto iris DC
Electronic Shutter: 1 ~ 1/10,000 sec
Wide Dynamic Range: 60 dB
White Balance: 2,000 ~ 10,000K
Sensitivity Sensitivity:
-f/1.2, 2800K, SNR >24 dB
-Color (33 ms): 0.50 lux
-Color SENS (500 ms): 0.12 lux
-Mono (33 ms): 0.25 lux
-Mono SENS (500 ms): 0.03 lux
Network Interface: RJ-45 connector for 100Base-TX
Auto: MDI/MDI-X
Cable Type: Cat5 or better for 100Base-TX
Power Input: 22 to 34 VAC; 24 VAC nominal or PoE (IEEE802.3af class 3)
Power Consumption: <6 W
Current Consumption PoE:
-<200 mA maximum
-24 VAC: <295 mA nominal; <390 mA maximum
Local Storage: Mini SD
Alarm Inputs: 10 VDC maximum, 5 mA maximum (x1)
Alarm Outputs: 0 ~ 15 VDC maximum, 75 mA maximum (x1)
Auxiliary Connectors: External 3-connector, 2.5 mm provides NTSC/PAL video output
Camera Mount:
-0.25" (0.64cm) UNC-20 screw, top and bottom of camera housing
-Video Compression H.264 base profile and MJPEG
Video Streaming: Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream
Frame Rate: Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7. 5, 6, 5, 4, 3, 2, 1 (dependent upon coding, resolution, and stream configuration)
Supported Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, mDNS (Bonjour), and 802.1x (EAP)
Simultaneous Client Access:
-Unicast: Up to 20 simultaneous users
-Multicast: Unlimited users H.264
Security: Password protected
Software Software: Interface: Web browser view and setup, up to 16 cameras
System Integration:
-Pelco System Integration: Endura 2.0 (or later)
-Digital Sentry: 4.2 (or later)
-Open IP Integration: Pelco IP camera API
Minimum Requirements:
-Processor: Pentium 4 microprocessor, 1.6 GHz
-OS: Windows XP, and Windows Vista, or Mac OS X 10.4 (or later)
-RAM: 512 MB
-Ethernet Card: 100 Megabits
-Web Browser: Microsoft Internet Explorer 7.0 (or later) or Mozilla Firefox 3.5 (or later)
Operating Temperature: 14 to 122F (-10 to 50C)
Storage Temperature: 14 to 158F (-10 to 70C)
Storage Humidity: 20% to 90%, noncondensing
Weight: (without lens) 1.11 lbs (0.50kg)
Features
  • IX30 Day/Night Camera
  • 13M2.8-12 Varifocal Lens
  • Resolution up to 2048 x 1536
  • H.264 & MJPEG Compression
  • Automatic Back Focus Control
  • Video Setup Jack
  • Standard Sabotage Behavior
  • Window Blanking Function
  • Resolving Power up to 100 lines/mm

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please