Home > Shop Brands > Pelco >

  Pelco PEL-8302AMSTRE2 Fiber Receiver Video extender External

Pelco PEL-8302AMSTRE2 Fiber Receiver Video extender External


 

Our Price : $690.31


Product Code: PEL-8302AMSTRE2

Qty:

Description
 
The FR8302A ?ber receiver provides the ability to accept two composite video channels over two optical ?bers. The FR8302A receiver is compatible with the FT8301A transmitter and is also backward compatible with the FT8301 transmitter. Each of two transmitters can send a single independent video channel to one FR8302A receiver. The FR8302A receiver is available in multimode and single-mode versions. When using single-mode ?ber, the FR8302A receiver and compatible transmitter offer an exceptional optical power budget of 28 dB and provide a transmission distance of up to 46 km.

Modular in design, the FR8302A receiver can be rack mounted or can be used as a standalone module. Rack mounting is accomplished using the RK5000 Series rack mount chassis. As a standalone module, the unit can be placed on a desktop or can be mounted to a wall.

Specifications:

Video:

Number of Channels: 2
Modulation Type: Pulse code modulation, 8-bit resolution
Video Output: BNC, 1.0 Vp-p, 75 ohms or UTP, 100 ohms; NTSC, PAL, and SECAM
Bandwidth: 6.5 MHz
Gain: Unity
Differential Gain: <2%
Differential Phase: <1
Tilt: <1%
Signal-to-Noise Ratio: >60 dB (CCIR weighted)

General:

Operating Temperature: -40 to 167F (-40 to 75C)
Input Power Requirements: 12 VDC or 24 VAC, 270 mA
LED Indicators: Power, Video Present (per channel), Optic Fault (per channel)
Dimensions: 8.75" D x 1.08" W x 4.81" H (22.23 x 2.74 x 12.22 cm)
Unit Weight: 1.58 lb (0.72 kg)
Shipping Weight: 3 lb (1.36 kg)

Mechanical:

Connectors:

Video: BNC (per channel), UTP, 2-pin connector, spring-cage terminal (per channel)
Rack Power/Alarm: 4-pin connector
Standalone Power: 2-pin connector, screw terminal
Fiber Optic: ST for multimode ?ber (per channel), ST or FC for single-mode ?ber (per channel)

Certifications:

CE, Class A
UL Listed
UL Listed to Canadian safety standards
FCC, Class A
C-Tick
Complies with FDA requirements for Class 1 laser products
Designed to meet NEMA TS 2 and Caltrans traf?c signal control equipment standards for ambient operating temperature, mechanical shock and vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection (certi?cation pending)
Features
  • Accepts Two 8-Bit Digitally Encoded Video Channels over Two Fibers
  • Compatible with FT8301A and FT8301 Fiber Transmitters
  • Multimode Fiber Support for Distances up to 6 km
  • Single-Mode Fiber Support for Distances up to 46 km
  • Exceeds All Requirements for the RS-250C Medium-Haul Transmission Speci?cation
  • Compatible with NTSC, PAL, and SECAM Video Standards
  • Designed to meet NEMA TS 2 and Caltrans Traf?c Signal Control Equipment Environmental Standards
  • No Performance Adjustments Required
  • 12 VDC or 24 VAC Power Supply
  • Standalone and Rack-Mountable Modular Design
  • LED Indicators for Monitoring of Signal Status and Operating Power

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please