The CC3600H-2 digital color camera is smaller than most other full-featured CCD cameras. In order to keep the camera as small as possible, Pelco engineers designed the camera components to fit within the external dimensions of the unit. Since the BNC, power and lens connectors stay within the boundaries of the case the compact camera and a lens fit perfectly inside one of Pelco's smaller enclosures (EH100, EH3508, EH2508, EH2020, EH2100 and EH2200). Pelco also has a wide selection of fixed and varifocal lenses available for the CC3600H-2 to meet your installation requirements.
The CC3600H-2 is a high-resolution digital camera with greater light sensitivity at 0.3 lux. The features of the camera include color balance settings, gamma level adjustment, automatic gain control, digital signal processing for automatic backlight compensation and line lock. To adjust one of these many fine-tuning picture modes, just reset the DIP switch setting on the side of the camera. The CC3600H-2 digital color camera also includes a 1/3-inch imager, accepts DC and video drive auto iris lenses, and has adjustable back focus to accommodate C or CS lenses. Back focus adjustment is easy with the lockable thumb wheel, accessible from the top or bottom of the camera.
The CC3600H-2 digital camera is quick and easy to install and its distinctive design is ideal for use in confined spaces. The camera has a quick-connect power connection, BNC video connector, and a removable mount adapter for top or bottom mounting.
Accessories include the PCM100, a Pelco camera mount designed specifically for the CC3600H-2. This adjustable, well-designed mount has no exposed cabling or hardware. All cables are integrated in the unit making installation quick and easy. The PCM100 can be installed directly to a wall, ceiling or adapted to a standard 2 x 4-inch (5.08 cm x 10.16 cm) electrical box.
CC3600H-2: 1/3-inch high resolution digital/color CCD camera, 480 TVL, NTSC format
CC3600H-2X; Same as CC3600H-2 except PAL format
Imaging Device: 1/3-inch interline transfer CCD
CC3600H-2 768 (H) x 494 (V)
CC3600H-2X 752 (H) x 582 (V)
Sensing Area 6mm diagonal:
CC3600H-2 525 lines, 2:1 interlace
CC3600H-2X 625 lines, 2:1 interlace
AC Line lock
Horizontal Resolution: 480 TV lines
Iris Control: Electronic/passive
Minimum Illumination: 0.3 lux @ 30 IRE, f1.2
Signal-to-Noise Ratio: 52 dB (AGC Off)
Gain Control: Automatic
Vertical Phase: Adjustable 0° ±120°
Automatic Gain Control: Selectable by DIP switch setting
Backlight Compensation: Selectable by DIP switch setting
Signal Processing: DSP
Auto Iris Lens Type: DC/video control
Video Output: 1 Vp-p, 75 ohms
Iris Control Range: 1/60-1/100,000 second
Auto White Balance Range: 2500-9500 K
Power Requirements 14-30 VAC or 11-40 VDC
Power Consumption Less than 5 watts
Power Connector 2-pin terminal strip, push-in type
Video Connector BNC
Lens Jack 4-pin connector (miniature square)
Lens Mount C/CS mount (adjustable)
Camera Mount 1/4-inch UNC-20 screw, top and
bottom of camera housing
Operating Temperature 14° to 122°F (-10° to +50°C)
Storage Temperature 14° to 158°F (-10° to +70° C)
Weight (without lens) 0.77 lb (0.35 kg)
Shipping Weight 2 lb (.9 kg) approximate
CE, Class B
UL, cUL listed
FCC, Class B
CM1750S/TB1750 Adjustable swivel head camera mounts for
wall, ceiling or pedestal mounting.
PCM100 Adjustable camera mount for wall or ceiling
application. Includes integrated cable for
easy plug-n-play operation. Can also be
adapted to a standard 2 x 4-inch (5.08 cm x
10.16 cm) electrical box.
Recommended Power Supplies:
TF2000 Power supply for 24 VAC cameras, 20 vA.
(For single camera application.)
MCS Series Multiple 24 VAC camera power supply,
WCS Series Multiple 24 VAC camera power supply,
13FA, FD Series Fixed focal lenses, 1/3-inch format.
FA (manual iris); FD (auto iris, DD).
13VA, VD Series Varifocal lenses, 1/3-inch format.
VA (manual iris); VD (auto iris, DD).
13ZD, ZM Series Motorized zoom lenses, 1/3-inch format.
ZD (auto iris, DD); ZM (manual iris).
LDC100 Auto iris drive converter. Converts a DC drive
auto iris lens to a video drive auto iris lens.
Compatible with all lens size format
- Sony EXview HAD Technology
- Compact Body Style, Shorter Length Than Most Full-Featured
- CCD Cameras
- 1/3-Inch Format CCD Imager
- C/CS Lens Mount
- DC/Video Drive Auto Iris Lens Compatibility
- 24V AC/DC Power
- Line Lock With Phase Adjust
- Four White Balance Modes
- Automatic Gain Control (AGC)
- Selectable Gamma
- Backlight Compensation
- Electronic Iris
- Horizontal Resolution of 480 TV Lines
- Digital Signal Processing
- Removable Low Profile Top/Bottom Mount
- Optional Integral Feedthrough Mount