Home > Shop Brands > Pelco >

  Pelco PEL-CR8104MSTR FR8104MSTR with Conformal Coating

Pelco PEL-CR8104MSTR FR8104MSTR with Conformal Coating


 

Our Price : $638.28


Product Code: PEL-CR8104MSTR

Qty:

Description
 
Fiber optics can be seen as the gold standard in data and video transmission cables. Compared to metal-based cables (e.g. RCA, BNC, UTP), fiber optic wiring links are far less susceptible to signal attenuation and are also immune to electromagnetic interference. The result is that fiber can be routed over much greater distances before needing amplification. Just as important is the higher bandwidths supported by fiber optic - up to 111Gbps per light channel, though 10Gbps or 40Gbps is most often utilized. Finally, it is virtually impossible to illicitly tap into a fiber cable the way that can be done with copper-based cables. The Pelco CR8104MSTR highlights all of these attributes in an industrial grade yet uncomplicated device. As such, it is the tool of choice for demanding security applications needing the ability to send large amounts of data, over long distances, and in a secure manner. Optional powered rack chassis available (RK5000-3U / RK5000PS-3U)

Conformal Coating: Because of its conformal coating, this fiber module can be used in environments with relative humidity above 95% (condensing).
Bidirectional Data Transmission: You can use this fiber module to send and recieve PTZ and other control signals under the protocols RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester and Bi-Phase communication.

Meets NEMA TS 2 and Caltrans Traffic Signal Control Standards:

This fiber module is designed to meet NEMA TS 2 and Caltrans traffic signal control equipment standards for ambient operating temperature, mechanical shock and vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection (certification pending).

No Performance Adjustments Required: This unit is designed to attain peak performance without requiring any adjustments on your part.

Optional Multi-Unit Powered Rack Box Available:

To save desktop space and for better power management, you can install this unit in an RK5000 series rack chassis. The Pelco RK5000PS-3U 19" rack chassis holds 12 fiber modules and also has a built-in power supply that provides electricity to all modules. There's also the RK5000PS-3U rack chassis, which has room for 14 fiber modules but does not come with a built-in power supply.

Specifications:

Signal System: N/A
Channels: 4 Bidirectional data channels
Wavelength: 1310 nm / 850 nm
Optical Power Budget: 26dB
Maximum Transmission Distance: 5 Mile (8km)

Connectors:

Fiber: ST connector
Rack Power/Alarm: 4-pin connector
Standalone Power: 2-pin connector
Data/Contact Closure: 8-pin connector x4

Control Protocol: Four bidirectional data channels support individual selection of RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester and Bi-Phase communication
Power Requirements: 12VDC or 24VAC (includes 12VDC adapter)
Power Consumption: 350mA
Operating Temperature: -40 ~ 167F (-40 ~ +75C)
Dimensions (WxHxD): 1.1 x 4.8 x 8.8" (27 x 122 x 222mm)
Weight: 1.7 lbs (0.8kg)
Features
  • 5 Mile (8km) Range
  • Single Fiber
  • Meets NEMA TS 2 & Caltrans
  • AC/DC

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please