Home > Shop Brands > Pelco >

  Pelco PEL-CR82011MSTR1 FR82011MSTR-1 with Conformal Coating

Pelco PEL-CR82011MSTR1 FR82011MSTR-1 with Conformal Coating


 

Our Price : $598.68


Product Code: PEL-CR82011MSTR1

Qty:

Description
 
The Pelco FT82011/FR82011 media converter converts 10Base-T/100Base-TX Ethernet data to 100Base-FX Ethernet data and vice versa. Designed for point-to-point applications, the FT82011/FR82011 media converter provides one 10Base-T/100Base-TX port and one 100Base-FX fiber port. The FT82011 and FR82011 media converters are used in combination with one another to provide wavelength compatibility. Using wavelength division multiplexing (WDM), bidirectional data is transported in a single fiber.

Autonegotiation:

The 100Base-FX fiber port is automatically forced to full-duplex 100 Mbps operation. Networking functions for the 10Base-T/100Base-TX port (RJ-45 twisted-pair copper port) are user selectable by means of a rotary switch. Autonegotiation allows the port to automatically negotiate between 10 Mbps and 100 Mbps data rates and between full-duplex and half-duplex modes. If autonegotiation is not desired, the port can be forced to specific modes of operation: 10 Mbps or 100 Mbps data rate, half-duplex or full-duplex mode, and the enabling/disabling of flow control. The auto MDI/MDI-X feature allows each RJ-45 port to connect to either a straight-through or crossover RJ-45 cable.

Link Down Connection:

The link-down detection feature of the media converters propagates a link-down status among all 10Base-T/100Base-TX and 100Base-FX ports connected in the network when a 10Base-T/100Base-TX link or 100Base-FX link goes down. As a result, all ports are disabled and data transmission halts until the faulty link is restored.

Rack Mountable:

Modular in design, the FT82011 and FR82011 units can be rack mounted or can be used as stand-alone modules. Rack mounting is accomplished using the RK5000 Series rack mount chassis. Standalone modules can be placed on a desktop or can be mounted to a wall.

Conformal Coating: Because of its conformal coating, this fiber module can be used in environments with relative humidity above 95% (condensing).

Specifications:

Channels: Switch Type: Unmanaged Layer 2
Modulation: Switching Method: Store and forward
Data Rate: 10/100 Mbps
Compliance: IEEE 802.3, 802.u, 802.3x
Interface: Auto MDI/MDI-X
Operating Modes: Half-duplex or full-duplex
MAC Address Table Size: 1,024 MAC address entries with automatic learning and aging
Quality of Service: IEEE 802.1p priority, tag-based, 4 queues per port, weighted fair queuing scheduling
Maximum Frame Size: Untagged Ethernet frames up to 1,518 bytes, Tagged Ethernet frames up to 1,522 bytes
Wavelength: 850/1310 nm
Optical Power Budget: 26dB
Maximum Transmission Distance: 1.2 Mile (2km)
Connectors: Ethernet: 1x RJ-45, 10Base-T/100Base-TX, Fiber: 1x ST single-fiber connector
Power Requirements: 12VDC or 24VAC (includes 12VDC adapter)
Power Consumption: 500mA
Operating Temperature: -40 ~ 167F (-40 ~ +75C)
Dimensions (WxHxD): 1.1 x 4.8 x 8.8" (27 x 122 x 222mm)
Weight: 1.6 lbs (0.73kg)
Features
  • 1x 10Base-T/100Base-TX Port
  • 1x 100Base-FX Port (Fiber)
  • Single Fiber
  • 1.2 Mile (2km) Range
  • Wavelength Division Multiplexing (WDM)
  • Auto MDI/MDI-X
  • Environmentally Hardened
  • Meets NEMA TS 2 & Caltrans

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please