Home > Shop Brands > Pelco >

  Pelco PEL-CR85081MSTR 8-Channel Digitally Encoded Video with Bidirectional Data & Conformal Coating

Pelco PEL-CR85081MSTR 8-Channel Digitally Encoded Video with Bidirectional Data & Conformal Coating


Our Price : $2,629.60

Product Code: PEL-CR85081MSTR


Fiber optics can be seen as the gold standard in data and video transmission cables. Compared to metal-based cables (e.g. RCA, BNC, UTP), fiber optic wiring links are far less susceptible to signal attenuation and are also immune to electromagnetic interference. The result is that fiber can be routed over much greater distances before needing amplification. Just as important is the higher bandwidths supported by fiber optic - up to 111Gbps per light channel, though 10Gbps or 40Gbps is most often utilized. Finally, it is virtually impossible to illicitly tap into a fiber cable the way that can be done with copper-based cables. The Pelco CR85081MSTR highlights all of these attributes in an industrial grade yet uncomplicated device. As such, it is the tool of choice for demanding security applications needing the ability to send large amounts of data, over long distances, and in a secure manner.

Conformal Coating:
Because of its conformal coating, this fiber module can be used in environments with relative humidity above 95% (condensing)

Bidirectional Data Transmission:
You can use this fiber module to send and recieve PTZ and other control signals under the protocols RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester and Bi-Phase communication

8-Bit Digital Encoding:
Thanks to an 8-bit digital encoding process, this unit is able to maintain superb video quality with the level of sharpness and color depth expected in demanding security environments

Meets NEMA TS 2 and Caltrans Traffic Signal Control Standards:
This fiber module is designed to meet NEMA TS 2 and Caltrans traffic signal control equipment standards for ambient operating temperature, mechanical shock and vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection (certification pending)

Conforms to RS-250C Standards:
This unit exceeds all requirements for the RS-250C medium-haul transmission specifications

No Performance Adjustments Required:
This unit is designed to attain peak performance without requiring any adjustments on your part

Optional Multi-Unit Powered Rack Box Available:
To save desktop space and for better power management, you can install this unit in an RK5000 series rack chassis. The Pelco RK5000PS-3U 19" rack chassis holds 12 fiber modules and also has a built-in power supply that provides electricity to all modules. There's also the RK5000PS-3U rack chassis, which has room for 14 fiber modules but does not come with a built-in power supply


Model Name: CR85081MSTR
Number of Video Channels: 8
Modulation Type: Pulse code modulation, 8-bit resolution
Video Input /Video Output: 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM
Bandwidth: 6.5 MHz
Gain: Unity
Crosstalk: -50 dB typical at 3.58 MHz
Differential Gain: <1%
Differential Phase: <1.2
Tilt: <1%
Signal-to-Noise Ratio: >60 dB (CCIR weighted)
Number of Data Channels: 1
Data Communication: RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, Bi-Phase
Maximum Baud Rate: 500 kbps
Operating Temperature: -40 to 167F (-40 to 75C)
Input Power Requirements: 12 VDC or 24 VAC, 600 mA
LED Indicators: Power Video Present (per channel) Optic Fault, Data Tx, Data Rx
Dimensions: 8.75" D x 3.48" W x 4.81" H (22.23 x 8.84 x 12.22 cm)
Unit Weight: 3.50 lb (1.59 kg)
Shipping Weight: 6 lb (2.72 kg)
Video Connector: BNC (per channel)
Rack Power/Alarm Connector: 4-pin connector
Stand-Alone Power Connector: 2-pin connector, screw terminal
Data Connector: 9-pin connector, screw terminal
Fiber Optic: Multimode (62.5/125 ?m)
Wavelength (Video/Data): 1310/850 nm
Optical Power Budget: 17 dB
Maximum Transmission Distance: 1 km (0.6 mi)
  • 8-Bit Digitally Encoded Video for High-Quality Multi-Channel Video Transmission over a Single Fiber
  • Bidirectional Data Channel That Supports RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication
  • Wavelength Division Multiplexing (WDM) in a Single Fiber
  • Multimode Fiber Support for Distances up to 1 km
  • Exceeds All Requirements for the RS-250C Medium-Haul Transmission Specification
  • Compatible with NTSC, PAL, and SECAM Video Standards
  • No Performance Adjustments Required
  • 12 VDC or 24 VAC Power Supply
  • Standalone and Rack-Mountable Modular Design
  • LED Indicators for Monitoring of Signal Status, Data Activity, and Operating Power
  • Eight-Channel Digitally Encoded Video with Bidirectional Data and conformal coating

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please