Home > Shop Brands > Pelco >

  Pelco PEL-DF8AJ0V50A ImagePak DF8A-0-C10CH-6

Pelco PEL-DF8AJ0V50A ImagePak DF8A-0-C10CH-6


Our Price : $440.26

Product Code: PEL-DF8AJ0V50A


The Pelco DF8AJ0V50A In-ceiling Fixed Mount Dome (Smoked, 5-50mm, Auto Iris) consists of C10CH-6 Color camera, an in-ceiling back box, a black opaque dome with a Smoked window, and a 5-50mm varifocal auto iris lens.

The plenum-rated aluminum-constructed in-ceiling back box secures the camera. With the 5.2" (13.2cm) of overhead space above the ceiling, the camera can be securely fit in hard ceilings or standard 2 x 2' (61 x 61 cm) suspended ceilings. The black opaque dome with smoked window ensures high optical clarity and causes f/0.7 light loss.

With an ultra-high resolution of 540TVL, the C10CH-6 Digital CCD Color Camera has a 1/3" CCD imager. A minimum illumination of 0.3 lux makes the camera suitable for low-level night time surveillance. The compact camera has a standard CS lens mount, and can be used with fixed, manual, or auto iris (DC or video drive) lenses.

Area masking, titling, pixel correction, and preset lighting profiles can be selected through the on-screen menu, using the side joystick. Automatic gain control adjusts the signal strength to maintain a constant brightness level. Backlight compensation adjusts video gain to correct the exposure when the object being captured is in front of a bright light source. Auto white balance takes a standard white color reference to adjust the RGB (red, green, and blue) colors to produce good quality images in different light conditions. The analog eclipser function allows the lens to create clear images of subjects in a dark area with a strongly backlit background.

The camera features electronic shutter control (ESC), flickerless mode, and autosensing power (24 VAC with internal line lock or 12 VDC with internal synchronization) and offers long distance cable compensation.

Connecting via the included 4-pin plug, the 13VD5-50 CS mount lens features a direct-drive auto iris and has 10x optical zoom (manual). The manual focus lens comes with a spot filter and has a focal length of 5-50mm. A relative aperture size between f/1.4 and f/360 allows the intraspot-type lens to perform across a wide range of lighting conditions.


Signal System : NTSC
Image Sensor: 1/3" Color IT CCD
Resolution: 540 TVL
Number of Pixels: 768 x 494
Lens: 2.8-12mm Manual Iris Lens (13VA2.8-12)
Iris Operation Camera supports auto iris DC/Video lenses

Minimum Illumination:
0.3 Lux (F1.2, 50 IRE, AGC on, 75% reflectance)
Controls AGC (selectable)
Electronic Shutter (selectable, 1/60-1/100000 sec range)
BLC (selectable)
Eclipser Function (selectable)
AWB (selectable)
Gamma (selectable)
Flickerless (selectable) Gamma

Video Output: BNC
Audio Output: N/A
Motion Detection: No
Alarm I/O: No
Control Ports: N/A
Power Requirements (camera only): 24VAC or 12VDC
Power Consumption (camera only): 3-4W
Operating Temperature (camera only): 14-122F (-10 ~ +50C)
Dimensions (WxHxD) (camera only): 2.2 x 2 x 3" (55 x 50 x 75mm)
Weight (camera only): 7 oz (200g)


Heater/Blower: N/A
Operating Temperature: 32-122F (0-50C)
Construction Back Box: Aluminum
Bubble: Acrylic plastic
Trim Ring: Aluminum
Finish: Polyester powder coat (pendant models)
Standards Meets: NEMA Type 4X and IP66 standards
Power Requirements: N/A
Power Consumption: N/A
Diameter and Height: 12 x 9.5" (30.5 x 24.1cm)
Weight: 3.1 lbs (1.4kg)
  • C10CH-6 Color Camera
  • In-ceiling Plenum-rated Back Box
  • Black Opaque Dome with Smoked Window
  • 13VD5-50 Varifocal Lens (5-50mm mm)
  • Ultra-high Resolution of 540TVL
  • Area Masking/Titling/Pixel Correction
  • Automatic Gain Control / White Balance
  • Analog Eclipser Function
  • Lens Comes with Spot Filter
  • Relative Aperture-f/1.4 and f/360

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please