Home > Shop Brands > Pelco >

  Pelco PEL-DVR53486000 48-Channel Enterprise Digital Video Recorder 6.0-TB Storage

Pelco PEL-DVR53486000 48-Channel Enterprise Digital Video Recorder 6.0-TB Storage


 

Our Price : $20,330.85


Product Code: PEL-DVR53486000

Qty:

Description
 
The DVR5348 is part of the Pelco Endura DVR5300 Digital Video Recorder System series and can be used to record video and audio streams from up to 48 IP cameras over a network. It can also receive IP streams from analog cameras connected to Endura compatible encoders or to ENC5300 series USB multichannel video encoders. The ENC5300 series encoders are specifically designed to work with this DVR5300 series of DVRs and are available in 8 or 16 channel configurations. Up to three ENC5300 encoders can be connected to a single DVR5300 recorder in any combination.

Recorded video can be viewed, played back, and controlled from any Endura viewing system such as the WS5000, VCD5000, or NET5301R decoder. Video generated by an ENC5300 encoder will be displayed at their recorded rate when accessed over an Endura system. Video can also be viewed via a CM9700 matrix switch using the CM9700MDD-EVS. By integrating this DVR with an existing matrix, operators can access this DVR using the same matrix console they're already familiar with.

This DVR ships with internal storage drives that are pre-configured for RAID 5 operation. This means that should any one drive fail its contents can be recovered by the other functioning drives, thereby providing fail safe operation. Redundant power supplies further help in maintaining system reliability.

This DVR incorporates EnduraStor technology to maximize storage and network efficiency. EnduraStor makes it possible to program any channel to record at a higher frame rate when triggered by alarm or motion detection and then revert to a lower frame rate when the event has passed. This way full motion video is provided when it's needed most.

Small footprint optimizes space planning for enterprise installations
Records video and audio from up to 48 cameras, each at 30 images per second (ips), 4CIF resolution
Records analog video from ENC5300 series USB multichannel encoders

8 or 16 MPEG-4 video input channels with 8 or 16 G.711 audio input channels
Up to 30 high quality 4CIF ips per input
8 or 16 programmable alarm inputs and 2 or 4 relay outputs
USB 2.0 connection to DVR5300 with Plug-and-Play configuration
Coaxitron PTZ control on each input
Records digital video from Endura video encoders
Expandable storage capacity using the Endura iSCSI storage expansion boxes (SEB5100)
All video is digitally signed at the encoding source for authentication
EnduraStor storage management system
Limited video editing on exported video
Fault tolerance through use of RAID 5 storage and redundant power supplies and fans
System diagnostics, monitoring, and error logging
Compatible with Pelco's CM9700 matrix switchers
DVR failover support using CM9700 matrix switchers

Specifications:

System:

Operating System: Linux
User Interface: Remote operation from WS5000 Endura Workstation or VCD5000
Signal System: NTSC/PAL/EIA/CCIR composite
Multiplexing: Yes
Compression: MPEG-4
Channels: 48

Storage:

Storage: 4.5TB
Occupied HDD Bays: 6
Empty HDD Bays: 6
Maximum Storage Capacity: Up to 6.98 TB, expandable using SEB5100
HDD Interface: SATA, hot-swappable
RAID Level: 5

ution 4CIF: 704 x 480 NTSC / 704 x 576 PAL
2CIF: 704 x 240 / 704 x 288 PAL
CIF: 352 x 240 / 352 x 288 PAL
Recording Rate Up to 30 FPS at 4CIF
Quality Setting Adjustable
PTZ Control Coaxitron (ENC5300)
Pelco D/Pelco P (DVR5300)
Motion Detection: Yes
USB Port: 4 high-speed USB 2.0 ports on rear panel
Control Ports: 1 RJ-45 connector; RS-422 from DVR5300 to CM9760-CDU-T; Pelco D/Pelco P

Alarm I/O:

Alarm Inputs: 16, programmable, 5.0 VDC, 10 kohms, triggered, CM9760-ALM compatible
Relay Outputs: 4, form-C relay, 30 VDC 2 A or 125 VAC 0.5 A, CM9760-REL compatible

Network:

Network Interface: 2 Gigabit Ethernet RJ-45 ports (1000Base-T)
Network Protocol Support: Yes
Security: 2 modes: secure mode (device authentication) and unsecure mode

General:

Power Requirements: 100-240 VAC 50/60 Hz, autoranging (internal, dual-redundant, hot-swappable power supply)

Power Consumption:
100 VAC: 339 W, 3.40 A, 1157 BTU/H
115 VAC: 335 W, 2.95 A, 1143 BTU/H
220 VAC: 332 W, 1.58 A, 1133 BTU/H

Operating Temperature: 50 - 95F (10 - 35C) - at unit air intake
Dimensions (DxWxH): 16.7 x 17 x 1.7" (42.4 x 43.2 x 4.3cm)
Weight: Approx. 67 lbs (31kg)
Features
  • 48 Channel
  • 4.5TB Internal Storage
  • Small Footprint
  • 30 IPS at 4CIF
  • USB Connection to ENC5300 Encoders
  • Compatible with CM97010 Matrix
  • iSCSI Expandable Storage
  • Limited Editing on Exported Video
  • RAID 5 / Redundant Power Supply
  • Digital Video Signage

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please