As part of Pelco's DX4500/4600 entry level series DVRs, the DX4508CD-750 is a great choice for those seeking Pelco-level security at an affordable price. And while this DVR doesn't have all the upgrade and expansion capabilities of some Pelco's higher end recorders it does come loaded with all of the features necessary to effectively manage the viewing and recording of a multi-camera setup in a commercial surveillance environment.
Highlighting the DX4508CD-750 DVR is a fast recording speed of 120 FPS, full network capabilities, local and remote PTZ control, and the ability to easily expand storage space by installing additional internal drives to the DVR (up to 3TB for DX4500, 6TB for DX4600). Pelco also designed it so that each camera can be independently adjusted for channel resolution, video quality, and frame rates. Along with configurable recording modes, this will allow system parameters to be set so that they closely match available network and storage resources.
Another strong point of this DVR is its compatibility with DS ControlPoint software, which can be used to simultaneously access cameras for viewing and control from any DX4500, DX4600, DX8000, or DX8100 DVR via a Digital Sentry system.
Adjustable Image Quality and Recording Parameters:
Recording at resolutions of up to 704 x 480 (4CIF), the DX4500/DX4600 captures crystal clear pictures, creating effective footage for later use and retrieval. Each DVR input channel can be configured individually to meet a specific security application requirement for video retention. User-configurable disk partitioning is used to allocate specific hard disk space for storing continuous video data and event-initiated video data. The retention time can be different for retaining continuous recorded video and event-initiated recorded video. Video critical to investigation and archiving is easily exported to a USB memory device or to an optional CD-RW or DVD±RW device.
Optimized for Today's Broadband Networks:
Designed to work with today's broadband networks, the DX4500/DX4600 allows you to view and control the DVR across local or wide area networks. The DX4500/DX4600 remote client allows live viewing and video playback for a maximum of sixteen DX4000 series servers simultaneously. This display can consist of multiple DX4500/DX4600 servers and one DX4004 server.
Compatible with DS ControlPoint Software
With DS ControlPoint software, the DX456/4600 can connect to a Digital Sentry system and other DX Series HVRs/DVRs. DS ControlPoint operators can simultaneously view and playback analog video and control cameras from any DX4500, DX4600, DX8000, or DX8100. Operators can also view and playback analog and IP video and control cameras from any Digital Sentry system.
Versatile Video Export Options:
Exported video is easily reviewed at the DX4500/DX4600, the remote client, or using the export player. The export video preview feature allows you to verify the content and quality of video exported to a disc or a USB drive. At the client, users can easily and quickly capture a video scene, save it in JPEG format, and then store it on the hard drive. User-configurable disk partitioning is used to allocate specific hard disk space for storing continuous video data and event-initiated video data. The retention time can be different for retaining continuous recorded video and event-initiated recorded video.
Front Panel or Optional Keyboard PTZ Control:
Operation of the unit is made easy through the front panel, remote control device, or mouse. For surveillance applications requiring PTZ capability, the DX4500/DX4600 addresses and controls pan/tilt/zoom (PTZ) equipment such as Spectra domes and mini domes or third-party cameras. The optional KBD300A keyboard operates Pelco and third-party PTZ cameras that support Pelco C (Coaxitron), Pelco D, or Pelco P protocols.
Multi-event recording on the DX4600 supports single-event recording or a combination of alarm, motion, or instant event recording at a resolution, quality, and image rate specific to each camera. With the ability to trigger recording and in response to events (such as alarm inputs, motion detection, and video loss), the DX4600 becomes an automated monitoring engine as well.
Operating System: Linux-Embedded
Signal System: NTSC/PAL, switchable
Storage: 750GB HDD
Built-In CD/DVD Burner: CD-RW
NTSC: 704 x 480, 704 x 240, 352 x 240
PAL: 704 x 576, 704 x 288, 352 x 288
CIF: 120 Total / 15 Per Camera (100 Total / 12.5 Per Camera PAL)
2CIF: 60 Total / 7.5 Per Camera (48 Total / 6 Per Camera PAL)
4CIF: 30 Total / 3 Per Camera (24 Total / 3 Per Camera PAL)
Display Rate: Up to 120 FPS
Quality Setting: Adjustable
Display Modes: Full or multi-camera
Recording Modes: Normal, Alarm, Motion, Instant Recording, and Multi-Event Recording
Video Inputs: BNC x8
1 main VGA or analog
1 analog spot (displays up to 4 cameras)
8 Looping outputs
Audio Inputs: RCA x2
Audio Outputs: RCA x1
Pelco C Coaxitron Pelco D, and Pelco P PTZ Protocols
Third Party Cameras
Bosch AutoDome Day/Night (AutoDome protocol)
Samsung Scc 641 (SCC protocol)
LG LPT-SD163HM (SD168 protocol)
Baxall BPD1-RAS916 (Pelco P protocol)
Motion Detection: Yes
USB Port: USB 2.0 x3 (1 front, 2 rear)
Control Ports: 2x RS-422/RS-485 for PTZ control
Alarm I/O: 8 Alarm inputs, 2 alarm outputs
Network Interface: 10/100 Mbps (RJ-45)
Network Protocol Support: TCP/IP
Recommended System Requirements:
(for remote PC client application)
OS: Windows Vista or Windows XP (SP2)
Processor: Intel Pentium 4 (or later), 2.4 GHz
Memory: 512 MB
Video Card: VGA card with 128 MB video RAM
Remote Administration: Full remote control through TCP/IP network
Power Requirements: 100-240VAC (auto sensing)
Power Consumption: 85W (maximum)
Operating Temperature: 32 -95°F (0 -35°C)
Dimensions (WxHxD): 16.9 x 3.8 x 19.5" (42.9 x 9.5 x 49.5cm)
Weight: Approx. 20 lbs (9kg)
- CD-RW Built-In
- Up to 120 FPS
- Optional Keyboard Control (KBD300A)
- WAN/LAN Access
- HDD Storage Manager
- Local/Remote PTZ Control
- Third Party PTZ Control
- Audio I/O
- Email Notification
- Compatible w/DS ControlPoint Software