 |
 |
 |
|
Pelco's DX7100 Series Digital Video Recorder (DVR) has built-in video motion detection, alarm-based recording, and relay output controls. Models range from an eight-channel, single 120 GB HDD to a sixteen-channel unit with 480 GB.
Record and display images from one, four, nine or sixteen camera inputs to a single SVGA monitor. Operate pan/tilt/zoom functions on controllable cameras such as Pelco's Spectra and Esprit Series. The DVR also features remote site access (through software), individual remote site settings, and multiple password levels.
The DX7100 Series DVR's recording features make it easy to customize a recording schedule. Continuous, motion, and/or sensor detection can be programmed using up to 24 available group schedules. Eight alarm inputs are available to trigger alarm recording when a signal is received from a connected device. This input will tell the unit to start recording, or if it is already recording, to record at a higher speed. A pre-alarm recording function can be set to record images before the alarm sensor detects disturbances. Each camera can be programmed to detect motion, including the capability to select up to 10 motion detection areas (per camera) and motion sensitivity.
Versatile high-speed search operations include time and date searching, index searching, skip searching, and alarm list searching.
Included with the DX7100 is the DX7100RX single site connection software. The software allows remote site viewing of live and recorded video of a single connected DX7100 site. Up to one hundred IP addresses and/or phone numbers can be registered for easy site connection. Software features include search, PTZ, and relay capabilities.
Optional multiple site connection software is also available. The CMS Central Management Software can simultaneously connect to one hundred, eight- or sixteen-channel DX7100 digital video recorders. Each camera can be individually programmed to display in live or playback mode. This feature allows the user to view live video and search multiple sites at the same time. Other features include event logging, PTZ, and relay capabilities.
Specifications:
Electrical/Vdieo/Audio:
Input Voltage (Power Supply): 100-240 VAC switchable, 50/60 Hz, 210 watts
Signal System: NTSC/PAL
CPU and RAM:
DX7108: Celeron, 256 MB
DX7116: PIII, 256 MB
Image Size:
NTSC: 320 x 240
PAL: 352 x 288
Compression: M-JPEG
Video Inputs: 8 or 16, depending on model
Video Outputs: 2 (1 SVGA, 1 analog)
Alarm Inputs: 8
Control Output: 8
Remote Control: Full remote control via PSTN, ISDN, TCP/IP
Pan/Tilt/Zoom Control: RS-422 interface to receivers
Mechanical:
CDRW (Internal):
Data Transfer Rate Write:
52X (7.8 MB per second)
Rewrite: 24X (3.6 MB per second)
Read: 52X maximum (7.2 MB per second)
Video Playback (VCD): 32X maximum (6 MB per second)
Connectors:
BNC: Video inputs
6-pin MiniDIN: PS/2 mouse and keyboard
Push-in Alarm: inputs, control outputs
9-pin D-type: COM 1 and 2
15-pin D-type: SVGA monitor port
25-pin D-type: Printer port
BNC: Analog or CCTV monitor
RJ-45: TCP/IP, LAN/WAN
USB: Two ports available for external backup device
General:
Operating Temperature: 50° to 95°F (10° to 35°C)
Relative Humidity: Maximum 80%, non-condensing
Dimensions: 7" H x 17" W x 18" D (4 RUs)(17.78 x 43.18 x 45.72 cm)
Unit Weight (Approximate):
DX7116-360: 47.2 lb (21.4 kg)
Certifications:
CE, Class B
UL Listed
cUL Listed to Canadian safety standards
FCC, Class B
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Multiple Camera Displays for Live Viewing or Playback While Recording
- Continuous, Motion Detection, Alarm, Pre-Alarm, and Scheduled Recording Modes
- High-Speed Searching (Date, Time, and Alarm)
- Playback by Date, Time, and Camera
- 8 Alarm Inputs and 8 Control Outputs
- Hardware Watchdog
- Recognition of Image Alteration
- Camera Pan/Tilt/Zoom Control Via RS-422
- Remote Viewing, Access, and Control Via PSTN, and TCP/IP (LAN/WAN/INTERNET)
- Built-in CD-RW Drive
|
|
|
|
|
|
|
|
|
