Home > Shop Brands > Pelco >

  Pelco PEL-EH81043 Enclosure 4-Inch Pressurized 230VAC

Pelco PEL-EH81043 Enclosure 4-Inch Pressurized 230VAC


Our Price : $640.14

Product Code: PEL-EH81043


The Pelco 8100 enclosure uses pressure derived from dry nitrogen to keep out dust, moisture, pollution, insects, and anything else that may enter and damage internal components. Pressure can be easily applied in the field and is inserted through a Schraeder valve. A purge relief fitting prevents over pressurization of the housing. There is also a built-in heater system to protect the camera from the cold.

This housing is constructed of aluminum, and has an adjustable mounting cradle, sled and track assembly for camera mounting. A T-handle on the rear plate provides easy access to the camera and lens during installation and servicing. Power, video, and lens control cables are routed through an MS-type connector on the rear of the enclosure.

An optional sun shroud is available for installations involving excessive exposure to sunlight. In addition to shielding the camera and housing from sun damage, the sun shroud will reduce internal temperatures by approximately 10-15F (6-10C).

For use with cameras having fixed focal length or motorized lenses.
Indoor/outdoor applications.
For use with fixed mount or pan/tilt.
Meets NEMA Type 6 and IP67 standards.
Easy access for service and installation.


Mount Type: Optional fixed and P/T mounts available
Compatible Cameras: CCTV box camera with fixed or motorized lens

Maximum Camera/Lens Size: LxWxH: 14 x 2.5 x 2.5" (35.6 x 6.4 x 6.4cm) or 14" length x 3" diameter (35.6 x 7.6cm)
Clear or Tinted: Clear


Construction: aluminum
Finish: gray polyester powder coat
Front Window: tempered glass, 0.225" (5.71mm) thick
Camera Mounting: multiple mounting holes on camera sled
Enclosure Mounting: adjustable cradle secured with type 316 stainless steel bands
Purge Fitting: standard Schraeder valve to allow enclosure to be ?lled with dry nitrogen
Purge Relief Fitting: prevents over pressurization of enclosure

Heater/Blower: Built-in heater (40W)

Enclosure Rating:

Meets NEMA Type 6 standards
Meets IP67 standards

Operating Temperature: -40 ~ +122F (-40 ~ +50C)
Power Requirements: 120VAC
Power Consumption: 40W
Dimension (HxL): 5.5 x 17" (14 x 43.2cm)
Weight: 15 lbs (6.8kg)
  • 4" Inside Diameter
  • 120VAC
  • Pressurized
  • Indoor/Outdoor Use (IP67)
  • Purge Relief Valve
  • Heater Built-In (40W)
  • Aluminum Construction
  • Adjustable Mounting Cradle
  • Compatible with Fixed and P/T Mounts
  • Optional Sun Shroud Available (SS8004)

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please