 |
 |
 |
|
The Pelco ES30122CBZ20W Integrated Positioning System (Wall Mount) consists of a receiver, a pan/tilt, an enclosure, and a factory-installed optics package that includes a CC3701H-2 Color Camera with a Z20 (5.6-112 mm) lens. A EWM Wall Mount is used to mount an Espirit system directly to a vertical load bearing surface.
With die-cast, extruded, and sheet aluminum construction and stainless-steel hardware, the positioning system is suitable for both indoor and outdoor applications and being gear-free, it requires minimum maintenance. Capable of operating in 90mph winds, the Positioning System can withstand wind velocities up to 130mph, and can function in temperatures ranging from -40 to 140° F (-40 to 60° C). Within 2 hours of starting up, the system can de-ice and be operational from a temperature of -13°F (-25°C). With the help of power-up recovery mode, the user can decide which operation of the system will be resumed when the power comes back on. It also includes a built-in thermostatically-controlled heater window defroster/defogger, and insulation bracket to maintain to internal temperature of the unit. A sun shroud protects the system from the direct rays of the sun.
The CC3701H-2 Digital CCD Color Camera has a 1/3" CCD imager and offers a resolution of 480 TV lines. With a minimum illumination requirement of 0.5 lux, the camera is suited for low-level night time surveillance, and the extended dynamic range (12x) ensures clear image quality in extreme light conditions. The camera accepts DC and video drive auto iris lenses, and has adjustable back focus to support all C/CS mount lenses. The lockable thumb wheel is accessible from the top or bottom of the camera and makes for easy back focus adjustment.
The camera features 2 color balance settings, digital signal processing, and line lock-resetting any of the DIP switches on the left side of the camera allows you to adjust the fine tuning of the corresponding feature.
Automatic gain control adjusts the signal strength to maintain a constant brightness level. Automatic backlight compensation adjusts video gain to correct the exposure when the object being captured is in front of a bright light source.
Zone blanking blanks out an entire area or zone (which is set by a system operator) to eliminate any unnecessary video information from being processed. Up to 8 zones can be programmed to output blank video for areas not requiring video surveillance.
The blank video output can be with or without labels; each label has a maximum limit of 20 characters. Window Blanking function blocks up to 4 user-defined, 4-sided shapes from being viewed by the operator.
Variable pan/tilt speeds range from 0.5-40°/sec in manual pan and 0.5-20°/sec in manual tilt. The system has pan preset and turbo speeds of 100°/sec in wind speeds of 50mph and 50°/sec in the 90mph wind speed. Capable of 360° continuous pan rotation, the pan/tilt head has a tilt preset speed of 30°/sec and a tilt ranging from +33 to -83°. The 64 programmable preset positions have a preset accuracy of 1/4°.
With on-screen, user-friendly menus, the system is easy to program and operate. The easy-to-install system has quick and simple electrical connections with 2 power source connections made at mount location with wire splices and 1 ground wire splice.
The Z20 motorized zoom lens features a direct-drive auto iris and has up to 20x optical zoom with a focal length of 5.6-112 mm. A relative aperture size between f/1.6 and f/360 allows the lens to perform across a wide range of lighting conditions.
Enclosure/Hardware:
Integrated enclosure made of die-cast, extruded sheet aluminum, stainless-steel hardware with a gray polyester powder coat finish
Accepts camera and lens combinations (including BNC connector) up to 12.10 x 3.45 x 3.17" (30.73 x 8.76 x 8.05 cm) (L x W x H)
Thermostatically controlled heater/window defroster, sun-shroud, and insulation bracket
2 power source connections made at the mounting location with wire nut splices and 1 ground terminal
Operational in 90mph winds, can withstand wind velocity up to 130mph
Optically clear, impact/scratch-resistant Lexan viewing window-0.23" (5.84mm) thick
Designed for minimal maintenance, no gears to adjust
Easy to install with quick and simple electrical connections
Camera mounting-elongated holes on removable camera mount; supplied with an adaptor bracket to accommodate various heights of cameras
C10DN-6 Color Camera:
Sony SuperHAD technology
1/3" color CCD image sensor with 768 x 494 pixels
Horizontal resolution of 480TVL
Minimum illumination-0.5 lux
Extended dynamic range (12x)
Adjustable back focus
C/CS lens mount
2 color balance settings
Digital signal processing
Line lock
Automatic gain control-adjusts the signal strength to maintain a constant brightness level
Automatic backlight compensation-adjusts video gain to correct the exposure when the object being captured is in front of a bright light source
Removable mount adaptor for top or bottom mounting
Quick-connect power connection
BNC video connector
24VAC / 12VDC power
Pan/Tilt/Presets:
Preset positioning, patterns, multiple scan modes
Variable speed pan-0.1 to 100°/sec with proportional pan
Tilt preset speed of 30°/sec
Tilt range of +33 to -83°
360° continuous pan rotation
Pan preset speed of 100°/sec in 50mph winds and 50°/sec in 90mph winds
Variable scan speeds (1 to 40°/sec)
On-screen compass, tilt, and zoom display
Lens with Presets:
Motorized zoom lens
Direct-drive auto iris
20x optical zoom
Focal length of 5.6-112 mm
Relative aperture size between f/1.6 and f/360
Minimum object distance-1.0m
Specifications:
Image Sensor: 1/3" image format interline transfer CCD
Pixel Resolution: 752 (H) x 582 (V)
Horizontal Resolution: 480TVL
Minimum Illumination: 0.5 lux at 40 IRE, f/1.2
Pan Angle: 360° Continuous pan rotation
Tilt Angle: Unobstructed +33° to -83°
Pan Speed:
Manual: 0.5 to 40°/sec variable-speed operation
Turbo: 100°/sec
Preset: 100°/sec
Tilt Speed: Manual: 0.5 to 20°/sec variable-speed operation, Preset: 30°/sec
Preset Positions: 64
Mounting: Camera Mounting: Elongated holes on removable camera mount; supplied with an adapter bracket to accommodate various heights of cameras
Maximum Camera/Lens Size: Lx W x H: 12.1 x 3.5 x 3.2" (30.7 x 8.8 x 8.1cm)
Power Requirements: 120/230VAC
Power Consumption: 70VA
Material: Die-cast, extruded and sheet aluminum; stainless steel hardware
Finish: Gray polyester powder coat
Viewing Window: 0.18" (4.76mm) thick, optically clear, impact resistant MR5 coated Lexan (UL 94 HB rated)
Operating Temperature: -40 to 122°F (-40 to 50°C) for sustained system operation or 140°F (60°C) absolute maximum. Within two hours after power-up, the entire unit can de-ice and be operational from a temperature of -13°F (-25°C)
Dimensions: 7.7 x 16.4 x 17.3" (19.7 x 41.7 x 43.9cm)
Weight: 25.7 lbs (11.7kg)
Lens:
Format: 1/3"
Focal Length: 5.6-112 mm
Zoom Ratio: 20x
Aperture: f/1.6 and 360
Angle of View:
Diagonal-3.2 to 59.4º
Horizontal-1.7 to 47.6º
Vertical-1.3-33.9º
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Receiver / Enclosure
- CC3701H-2 Color Camera
- Z20 Motorized Zoom Lens (5.6-112 mm)
- Wall Mount
- Heater / Defroster / Sun Shroud
- Removable IR Cut Filter
- Zone Blanking / 64 Preset Positions
- Power-up Recovery Mode
- Variable Pan/Tilt Speed
|
|
|
|
|
|
|
|
|
