The Pelco ES30125KWZ10PW Positioning System with IOP (Wall Mount, 10x) consists of a receiver, a pan/tilt, an enclosure, and a factory-installed optics package that includes a CC3751H-2 color camera with Z10P (6 to 60 mm) lens. A EWM Wall Mount is used to mount an Esprit system directly to a vertical load bearing surface. The system has an input voltage of 120/230 VAC.
With die-cast, extruded, and sheet aluminum construction and stainless-steel hardware, the positioning system is suitable for both indoor and outdoor applications, and being gear-free it requires minimum maintenance. Capable of operating in 90mph winds, the Positioning System can withstand wind velocities up to 130mph, and can function in temperatures ranging from -40 to 140° F (-40 to 60° C). Within 2 hours of starting up, the system can de-ice and be operational from a temperature of -13°F (-25°C). With the help of power-up recovery mode, the user can decide which operation of the system will be resumed when the power comes back on. It also includes a built-in thermostatically-controlled heater window defroster/defogger, and insulation bracket to maintain to internal temperature of the unit. A sun shroud protects the system from the direct rays of the sun.
The CCC1390H-6 Day/Night camera includes a 1/3" format Sony SS-2WD CCD Imager and offers a high resolution of 530 TVL B-W/480 TVL Color. With a minimum illumination of 0.8 lux (color mode) and 0.08 lux (B&W mode), the camera offers features such as Auto White Balance, Automatic Gain Control, and Backlight Compensation. The camera uses a removable IR (infrared) cut filter to switch between color and B&W as per the ambient changes in lighting. The compact camera has a standard CS lens mount, and can be used with fixed, manual, or DC-drive auto iris lenses. The auto iris is controlled through a standard 4-pin square connector (included).
Thanks to the WDR (Wide Dynamic Range) technology that offers 60 db of dynamic range, superior images are produced over a wide range of lighting conditions, including extreme backlight conditions. You can access on-screen programmable menus locally using the rear panel button or remotely using any Pelco controller with Pelco P/Pelco D protocol. These menus can be used to select a specific profile or to customize and save camera settings for the specific application.
The camera features electronic shutter control (ESC), flickerless mode, and autosensing power (24 VAC with internal line lock or 12 VDC with internal synchronization). The camera is quick and easy to install; moreover, its compact size makes it ideal for Pelco's DomePak, and ImagePak fixed camera dome/enclosure packages.
Zone blanking blanks out an entire area or zone (which is set by a system operator) to eliminate any unnecessary video information from being processed, thus decreasing video traffic over a network. Up to 8 zones can be programmed to output blank video for areas not requiring video surveillance.
The blank video output can be with or without labels; each label has a maximum limit of 20 characters. Window Blanking function blocks up to 4 user-defined, 4-sided shapes from being viewed by the operator.
Variable pan/tilt speeds range from 0.5-40°/sec in manual pan and 0.5-20°/sec in manual tilt. The system has pan preset and turbo speeds of 100°/sec in wind speeds of 50mph and 50°/sec in the 90mph wind speed. Capable of 360° continuous pan rotation, the pan/tilt head has a tilt preset speed of 30°/sec and a tilt ranging from +33 to -83°. The 64 programmable preset positions have a preset accuracy of 1/4°.
With on-screen, user-friendly menus, the system is easy to program and operate. The easy-to-install system has quick and simple electrical connections with 2 power source connections made at mount location with wire splices and 1 ground wire splice.
The Z10P motorized zoom lens features a direct-drive auto iris and has up to 10x optical zoom with a focal length of 6 to 60 mm. A relative aperture size between f/1.6 and 360 allows the lens to perform across a wide range of lighting conditions.
Integrated enclosure made of die-cast, extruded, and sheet aluminum, with stainless-steel hardware and a gray polyester powder coat finish
Accepts camera and lens combinations (including BNC connector) up to 12.10 x 3.45 x 3.17" (30.73 x 8.76 x 8.05 cm) (L x W x H)
Thermostatically controlled heater/window defroster, sun-shroud, and insulation bracket
2 power source connections made at the mounting location with wire nut splices and 1 ground terminal
Operational in 90mph winds, can withstand wind velocity up to 130mph
Within 2 hours after power-up, the entire unit can de-ice and be operational from a temperature of -13°F (-25°C)
Optically clear, impact/scratch-resistant Lexan viewing window-0.23" (5.84mm) thick
Designed for minimal maintenance, no gears to adjust
Easy to install with quick and simple electrical connections
Camera mounting-elongated holes on removable camera mount; supplied with an adaptor bracket to accommodate various heights of cameras
CC3751H-2 High Resolution, Color Camera:
1/3" color CCD image sensor with 768 x 494 pixels
Horizontal resolution of 480TVL
Minimum illumination-0.01 lux at f/1.2
Extended DSS settings to enhance the low-light performance and slow the picture frame-rate as well as increase the camera's sensitivity in low light conditions
4 DSS settings-Off to disable the DSS mode, 4 fields of integration maximum (1/15-second update rate), 15 fields of integration maximum (1/4-second update rate), and 30 fields of integration maximum (1/2-second update rate)
24VAC / 12VDC power
Accepts DC and video drive auto iris lenses or fixed/manual iris lenses
Adjustable back focus to support all C/CS mount lenses
Automatic gain control-adjusts the signal strength to maintain a constant brightness level
Backlight compensation-adjusts video gain to correct the exposure when the object being captured is in front of a bright light source
Electronic shutter control (ESC), line lock with phase adjustment, enhanced sharpness, and long line compensation
Lockable, easy-to-grip thumb wheel
Quick-connect power connection
Removable top/bottom mount
Low profile mounting block
BNC video connector
64 programmable presets with labels
Auto, frame, and random scan
Programmable power-up mode/park/manual limit stops pan/scan limit patterns
8 zones (programmable in size) can be labeled with up to 20 characters each
Zone blanking across 8 programmable zones for ensuring privacy wherever required, for example, around password panels and combination locks
Preset positioning, patterns, multiple scan modes
Variable speed pan-0.1 to 100°/sec with proportional pan
360° continuous pan rotation
Pan preset speed of 100°/sec in 50mph winds and 50°/sec in 90mph winds
Variable scan speeds (1 to 40°/sec)
On-screen compass, tilt, and zoom display
Lens with Presets:
Motorized zoom lens
Direct-drive auto iris
10x optical zoom
Focal length of 6 to 60 mm
Pan Angle: 360° Continuous pan rotation
Tilt Angle: Unobstructed +33° to -83°
Manual: 0.5 to 40°/sec variable-speed operation
Tilt Speed: Manual: 0.5 to 20°/sec variable-speed operation, Preset: 30°/sec
Preset Positions: 64
Mounting: Camera Mounting: Elongated holes on removable camera mount; supplied with an adapter bracket to accommodate various heights of cameras
Maximum Camera/Lens Size: Lx W x H: 12.1 x 3.5 x 3.2" (30.7 x 8.8 x 8.1cm)
Power Requirements: 120/230VAC
Power Consumption: 70VA
Material: Die-cast, extruded and sheet aluminum; stainless steel hardware
Finish: Gray polyester powder coat
Viewing Window: 0.18" (4.76mm) thick, optically clear, impact resistant MR5 coated Lexan (UL 94 HB rated)
Operating Temperature: -40 to 122°F (-40 to 50°C) for sustained system operation or 140°F (60°C) absolute maximum. Within two hours after power-up, the entire unit can de-ice and be operational from a temperature of -13°F (-25°C)
Dimensions: 7.7 x 16.4 x 17.3" (19.7 x 41.7 x 43.9cm)
Weight: 25.7 lbs (11.7kg)
Focal Length: 6 to 60 mm
Zoom Ratio: 10x
Aperture: f/1.6 and 360
Angle of View: 9.7 to 53.7°, 7.8 to 43.7°, 5.9 to 33.0°
- Receiver / Enclosure
- CC3751H-2 Color Camera
- Z10P Motorized Zoom Lens (6 to 60 mm)
- Factory-installed Optics Package
- No Gears to Adjust
- Heater / Defroster / Sun Shroud
- Extended Digital Slow Shutter Settings
- Zone Blanking / 64 Preset Positions
- Variable Pan/Tilt Speed
- Power-up Recovery Mode