Home > Shop Brands > Pelco >

  Pelco PEL-FR8104SSTR-S Pelco 4-Channel Data Receiver

Pelco PEL-FR8104SSTR-S Pelco 4-Channel Data Receiver


 

Our Price : $646.23


Product Code: PEL-FR8104SSTR-S

Qty:

Description
 
Pelco FR8104SSTR Single Mode 4d Bi Direct Fiber Rx St Connector

The FR8104SSTR fiber transmitter and receiver provide the ability to transmit and receive a single channel of bidirectional data over one optical fiber. The FR8104SSTR transmitter and receiver are available in multimode and single-mode versions. When using single-mode fiber, the FR8104SSTR transmitter and receiver offer an exceptional optical power budget of 28 dB and provide a transmission distance of up to 46 km.
Modular in design, the FR8104SSTR units can be rack mounted or can be used as stand-alone modules. Rack mounting is accomplished using the RK5000 Series rack mount chassis. Standalone modules can be placed on a desktop or can be mounted to a wall. In addition to compatibility with each other, the FR8104SSTR transmitter and the FR8104SSTR receiver are compatible with other fiber models. The FR8104SSTR transmitter is backward compatible with the FR8101 receiver. The FR8104SSTR receiver is backward compatible with the FR8104SSTR transmitter.

Specifications:

Inputs/Outputs:

Rack Power/Alarm: 4-pin connector
Stand-Alone Power: 2-pin connector, screw terminal
Data/Contact Closure: 8-pin connector, tension clamps (per channel)
Fiber Optic: ST

Transmission:

Fiber Type: multi-mode (62.5/125um)
Fiber-optic connector type: ST
Wavelength: 1310/1550nm
Optical power budget:
26dB
Maximum transmission distance: 24.9 miles (40km)

Data:

Number of Channels: 1
Data Communication:
RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, Bi-Phase
Maximum Baud Rate: 500kbps

Contact Closure:

Number of Channels: 4
Input: active low
Output: 30VDC, 1A
Choice of normally open or normally closed

Indicators:

Power
Optic Fault
Data Activity and Contact Closure (per channel)

Standards:

CE, Class A
UL Listed
UL Listed to Canadian safety standards
FCC, Class A
C-Tick
Complies with FDA requirements for Class 1 laser products
Designed to meet NEMA TS 2 and Caltrans traffic signal control equipment standards for ambient operating temperature, mechanical shock and vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection (certification pending)
Power 12VDC or 24VAC, 350mA
Dimensions (HxWxD) 4.81 x 1.08 x 8.75" (12.22 x 2.74 x 22.23cm)
Weight Unit weight: 1.66 lbs (0.75kg)
Shipping weight: 3 lbs (1.36kg)
Features
  • Bidirectional Data Channel That Supports RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication
  • Integrated Wavelength Division Multiplexing (WDM) in a Single Fiber
  • Multimode Fiber Support for Distances up to 8 km
  • Single-Mode Fiber Support for Distances up to 46 km
  • Designed to Meet NEMA TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
  • No Performance Adjustments Required
  • 12 VDC or 24 VAC Power Supply
  • Stand-Alone and Rack-Mountable Modular Design
  • LED Indicators for Monitoring of Signal Status, Laser Status, Data Activity, and Operating Power

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please