Home > Shop Brands > Pelco >

  Pelco PEL-FR8302ASFCR2 Single Mode-2V 8Bit Fiber RX : FC Connector Dual Fiber

Pelco PEL-FR8302ASFCR2 Single Mode-2V 8Bit Fiber RX : FC Connector Dual Fiber


Our Price : $923.82

Product Code: PEL-FR8302ASFCR2


The FR8302A ?ber receiver provides the ability to accept two composite video channels over two optical ?bers. The FR8302A receiver is compatible with the FT8301A transmitter and is also backward compatible with the FT8301 transmitter. Each of two transmitters can send a single independent video channel to one FR8302A receiver.

The FR8302A receiver is available in multimode and single-mode versions. When using single-mode ?ber, the FR8302A receiver and compatible transmitter offer an exceptional optical power budget of 28 dB and provide a transmission distance of up to 46 km. Modular in design, the FR8302A receiver can be rack mounted or can be used as a standalone module. Rack mounting is accomplished using the RK5000 Series rack mount chassis. As a standalone module, the unit can be placed on a desktop or can be mounted to a wall.

Fiber optics can be seen as the gold standard in cable transmission. Compared to metal-based cables (e.g. RCA, BNC, UTP), fiber optic wiring links are far less susceptible to signal attenuation and are also immune to electromagnetic interference. The result is that fiber can be strung over much greater distances before needing amplification. Just as important is the higher bandwidths supported by fiber optic - up to 111Gbps per light channel, though 10 or 40Gbps is most often utilized. Finally, it is virtually impossible to illicitly tap into a fiber cable the way that can be done with copper-based cables. The Pelco FR8302ASFCR-2 highlights all of these attributes in an industrial grade yet uncomplicated device. As such, it is the tool of choice for demanding security applications needing the ability to send large amounts of data, over long distances, and in a secure manner.



Number of Channels: 2
Modulation Type: Pulse code modulation, 8-bit resolution

Video Output:

BNC, 1.0 Vp-p, 75 ohms or UTP, 100 ohms;

Bandwidth: 6.5 MHz
Gain: Unity
Differential Gain: <2%
Differential Phase: <1
Tilt: <1%
Signal-to-Noise Ratio: >60 dB (CCIR weighted)


Operating Temperature: -40 to 167F (-40 to 75C)
Input Power Requirements: 12 VDC or 24 VAC, 270 mA

LED Indicators:
-Video Present (per channel)
-Optic Fault (per channel)

Dimensions: 8.75" D x 1.08" W x 4.81" H (22.23 x 2.74 x 12.22 cm)
Unit Weight: 1.58 lb (0.72 kg)



-BNC (per channel)
-UTP, 2-pin connector, spring-cage terminal (per channel)

Rack Power/Alarm: 4-pin connector
Standalone Power: 2-pin connector, screw terminal

Fiber Optic:
-ST for multimode ?ber (per channel)
-ST or FC for single-mode ?ber (per channel)


CE, Class B
UL Listed
UL Listed to Canadian Safety Standards
FCC, Class B
Complies with FDA Requirements for Class 1 Laser Products
  • Accepts Two 8-Bit Digitally Encoded Video Channels over Two Fibers
  • Compatible with FT8301A and FT8301 Fiber Transmitters
  • Multimode Fiber Support for Distances up to 6 km
  • Single-Mode Fiber Support for Distances up to 46 km
  • Exceeds All Requirements for the RS-250C Medium-Haul Transmission Speci?cation
  • Compatible with NTSC, PAL, and SECAM Video Standards
  • Designed to meet NEMA TS 2 and Caltrans Traf?c Signal Control Equipment Environmental Standards
  • No Performance Adjustments Required
  • 12 VDC or 24 VAC Power Supply
  • Standalone and Rack-Mountable Modular Design
  • LED Indicators for Monitoring of Signal Status and Operating Power

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please