Home > Shop Brands > Pelco >

  Pelco PEL-FR85011AMSTR-S Multimode 1 Volt 1D 8 Bit Fiber Reciever RX ST Connector

Pelco PEL-FR85011AMSTR-S Multimode 1 Volt 1D 8 Bit Fiber Reciever RX ST Connector


 

Our Price : $533.94


Product Code: PEL-FR85011AMSTR-S

Qty:

Description
 
Digital 1310nm / 850nm Video / Bidirectional Data Multimode Fiber Rx ST Connector.

Available in multimode and single-mode versions, the FT85011A/ FR85011A fiber transmitter and receiver provide the ability to trans- mit one unidirectional composite video channel and one bidirectional data channel over one optical fiber. In addition, patent-pending technology provides the solution for allowing Coaxitron pan/tilt/ zoom (PTZ) control data to be transmitted the full distance of the fiber (up to 6 km for multimode fiber and up to 46 km for single-mode fiber). When using single-mode fiber, the FT85011A transmitter and the FR85011A receiver offer an exceptional optical power budget of 28 dB.

Specifications:

Transmission:

-Fiber-optic connector type: ST
-Wavelength: 1310/850nm
-Optical power budget: 20dB
-Maximum transmission distance: 3.7 miles

Video:

-Number of channels: 1
-Modulation type: Pulse code modulation, 8-bit resolution
-Video input: 1.0Vp-p, 75 ohms; NTSC, PAL, and SECAM
-Bandwidth: 6.5MHz
-Gain: unity
-Differential gain: <2%
-Differential phase: <1°
-Tilt: <1%
-Signal-to-noise ratio: >60dB (CCIR weighted)

Data:

-Number of channels: 1
-Data communication:
-RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, Bi-Phase, Coaxitron
-Maximum baud rate: 500kbps

Power: 12VDC or 24VAC, 300mA
Dimensions (HxWxD): 4.81 x 1.08 x 8.75" (12.22 x 2.74 x 22.23cm)

Weight:

-Unit weight: 1.48 lbs (0.67kg)
-Shipping weight: 3 lbs (1.36kg)
Features
  • 8-Bit Digitally Encoded Video for High-Quality Video Transmission over a Single Fiber
  • Bidirectional Data Channel That Supports RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, Bi-Phase, and Coaxitron Communication
  • Patent-Pending Transmission Technology Allowing Coaxitron Control at Full-Distance Capabilities
  • Integrated Wavelength Division Multiplexing (WDM) in a Single Fiber
  • Multimode Fiber Support for Distances up to 6 km
  • Single-Mode Fiber Support for Distances up to 46 km
  • Exceeds All Requirements for the RS-250C Medium-Haul Transmission Specification
  • Compatible with NTSC, PAL, and SECAM Video Standards
  • Meets NEMA TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
  • No Performance Adjustments Required
  • 12 VDC or 24 VAC Power Supply


Browse for more products in the same category as this item:

Shop Brands > Pelco