Home > Shop Brands > Pelco >

  Pelco PEL-FS85011ASSTEX Single Channel Fiber for Exsite - 6 Foot Fiber Cable

Pelco PEL-FS85011ASSTEX Single Channel Fiber for Exsite - 6 Foot Fiber Cable


Our Price : $761.71

Product Code: PEL-FS85011ASSTEX


The FS85011A fiber transmitter is designed for quick and easy installation into the back box of Spectra III and Spectra IV domes or can be included as part of an ExSite explosionproof positioning system at the factory. The FS85011A transmitter provides the ability to send one unidirectional composite video channel and one bidirectional RS-422 data channel over one optical fiber. In addition, patent pending technology provides the solution for allowing Coaxitron pan/tilt/zoom (PTZ) control data to be transmitted the full distance of the fiber. Available in multimode and single-mode versions, the FS85011A transmitter is compatible with the FR85011A/FR85011 receiver.

A jumper on the FS85011A transmitter provides the unique capability to select RS-422 or Coaxitron data communication. The selection of RS-422 data communication allows PTZ control of the Spectra III/Spectra IV dome or of the ExSite positioning system. With Coaxitron control, PTZ control signals are transmitted over video coaxial cable from the controller to the FR85011A/FR85011 receiver. The receiver then transmits the Coaxitron data onto the fiber to the FS85011A transmitter. The Coaxitron data is transmitted from the controller to the Spectra III/Spectra IV dome or to the ExSite positioning system during the vertical blanking interval of the video signal. The FS85011A transmitter operates using power supplied from the Spectra III/Spectra IV dome or from the ExSite positioning system.


Number of Channels: 1
Modulation Type: Pulse code modulation, 8-bit resolution
Video Input: 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM
Bandwidth: 6.5 MHz
Gain: Unity
Differential Gain: <2%
Differential Phase: <1
Tilt: <1%
Signal-to-Noise Ratio: >60 dB (CCIR weighted)

Number of Channels: 1
Data Communication: RS-422, Coaxitron

Operating Temperature: Refer to the Spectra III, Spectra IV, or ExSite product specification sheet as appropriate
Input Power Requirements: 12 VDC, 160 mA
LED Indicator: Optic Fault
Dimensions: 2.9" L x 2.0" W (7.37 x 5.08 cm)
Unit Weight: 0.08 lb (0.04 kg)

Video/Data/Power 16-pin header
Data Selection 2-pin header
Fiber Optic ST for multimode fiber
ST or FC for single-mode fiber
  • Single-Mode (9/125 ?m)
  • Designed for Use in Spectra III and Spectra IV Domes and in the ExSite Explosionproof Positioning System
  • 8-Bit Digitally Encoded Video for High-Quality Video Transmission over a Single Fiber
  • Bidirectional RS-422 Data Channel or Coaxitron Communication
  • Patent-Pending Transmission Technology Allowing Coaxitron Control at Full-Distance Capabilities
  • Compatible with the FR85011ASSTR/FR85011SSTR Fiber Receiver
  • Integrated Wavelength Division Multiplexing (WDM) in a Single Fiber
  • Support for Distances up to 46 km
  • Laser Diode for Transmission of Optical Signals
  • Exceeds All Requirements for the RS-250C Medium-Haul Transmission Specification
  • Compatible with NTSC, PAL, and SECAM Video Standards
  • No Performance Adjustments Required
  • LED Indicator for Monitoring of Signal Status
  • 6 ft (1.83 m) Cable Length

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please