Home > Shop Brands > Pelco >

  Pelco PEL-FT106011SSTR Single-Mode Fiber Transmitter & Receiver ST Connector

Pelco PEL-FT106011SSTR Single-Mode Fiber Transmitter & Receiver ST Connector


 

Our Price : $1,508.68


Product Code: PEL-FT106011SSTR

Qty:

Description
 
Pelco FT106011SSTR Single-Mode, Fiber Transmitter and Receiver, ST Connector: The FT106011SSTR is a fiber transmitter and receiver provide simultaneous transmission of one unidirectional video channel, two bidirectional audio channels, one bidirectional data channel, and one bidirectional contact closure over one optical fiber. The transmitter and the FT106011SSTR is a receiver are available in multimode and single-mode versions. When using single-mode fiber, the FT106011SSTR transmitter and the receiver offer an exceptional optical power budget of 24 dB. Audio and data modes of operation are user selectable by means of a rotary switch. The FT106011SSTR is a transmitter and the receiver can be used with balanced or unbalanced audio signals and allow selection of 600-ohm or 47K-ohm input impedance. Data selection offers a choice of RS-232, RS-422, RS-485 (2-wire/4-wire), Manchester, Bi-Phase, or Coaxitroncommunication. Using patentpending technology, Coaxitron pan/tilt/zoom (PTZ) control data can be transmitted the full distance of the fiber (up to 6 km for multimode fiber and up to 38 km for single-mode fiber).

Specifications:

Model: FT106011SSTR
Number of Channels: 1
Modulation Type: Pulse code modulation, 8-bit resolution
Video Output (BNC, 1.0 Vp-p, 75 ohms or UTP, 100 ohms;NTSC, PAL, and SECAM
Bandwidth: 6.5 MHz
Crosstalk: -50 dB typical at 3.58 MHz
Gain: Unity
Differential Gain: <1%
Differential Phase: <0.7
Tilt: <1%
Number of Channels: 1
Data Communication: RS-232, RS-422, RS-485 (2-wire/4-wire),Manchester, Bi-Phase
Maximum Baud Rate: 500 kbps
Number of Channels: 1
Input: Active low
Output: 30 VDC, 1 A Choice of normally open or normally closed
Signal-to-Noise Ratio: >70 dB (CCIR weighted)
Relay Output: 30 VDC, 1 A Choice of normally open or normally closed
Operating Temperature: -40 to 167F (-40 to 75C)
Input Power Requirements: 12 VDC or 24 VAC, 600 mA
LED Indicators: Power, Video Present, Audio Present,Data Activity, Contact Closure Activation,Optic Fault
Dimensions: 8.75" D x 1.08" W x 4.81" H(22.23 x 2.74 x 12.22 cm)
Unit Weight: 1.6 lb (0.73 kg)
Shipping Weight: 3 lb (1.36 kg)
Connectors:Video: BNC Rack Power:4-pin connector Standalone Power: 2-pin connector, screw terminal Data: 8-pin connector, tension clamps Contact Closure Fiber Optic: ST for multimode fiber ST or FC for single-mode fiber
Optical Power Budget: 24 dB
Maximum Transmission Distance: 38 km (23.6 mi)
Features
  • 10-Bit Digitally Encoded Video for High-Quality Video Transmission over a Single Fiber
  • Two Bidirectional 24-Bit Digitally Encoded Audio Channels with User-Selectable 600-Ohm Balanced or 47K-Ohm Unbalanced Input Impedance
  • Bidirectional Data Channel with User-Selectable RS-232, RS-422, RS-485 (2-Wire/4-Wire), Manchester, Bi-Phase, and CoaxitronCommunication
  • Bidirectional Contact Closure That Allows a Choice of Normally Open or Normally Closed Outputs
  • Multimode Fiber Support for Distances up to 6 km
  • Single-Mode Fiber Support for Distances up to 38 km
  • Laser Diode for Transmission of Optical Signals
  • Patent-Pending Transmission Technology Allowing Coaxitron Control at Full-Distance Capabilities
  • Compatible with NTSC, PAL, and SECAM Video Standards
  • Designed to Meet NEMA TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
  • No Performance Adjustments Required
  • 12 VDC or 24 VAC Power Supply
  • Stand-Alone and Rack-Mountable Modular Design
  • LED Indicators for Monitoring of Signal Status, Laser Status, Data Activity, Contact Closure Activation, and Operating Power

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Brands > Pelco
 
 

Enter your email for a chance to WIN $100 Amex Gift Card.

Please Enter Your Email Address

*One entry per household please